Studi Mutu Kayu Jati di Hutan Rakyat Gunungkidul IV. Sifat Mekanika Kayu

https://doi.org/10.22146/jik.10197

Sri Nugroho Marsoem(1*), Vendy Eko Prasetyo(2), Joko Sulistyo(3), Sudaryono Sudaryono(4), Ganis Lukmandaru(5)

(1) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada Jl. Agro No 1, Bulaksumur, Sleman 55281
(2) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada Jl. Agro No 1, Bulaksumur, Sleman 55281
(3) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada Jl. Agro No 1, Bulaksumur, Sleman 55281
(4) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada Jl. Agro No 1, Bulaksumur, Sleman 55281
(5) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada Jl. Agro No 1, Bulaksumur, Sleman 55281
(*) Corresponding Author

Abstract


Sifat mekanika dari kayu gergajian adalah persyaratan terpenting dalam banyak penerapan khususnya untuk keperluan konstruksi. Paper ini merupakan lanjutan dari penelitian sifat fisika kayu di tiga tempat tumbuh (Panggang, Playen, Nglipar) hutan rakyat Kabupaten Gunungkidul. Pengujian sifat mekanika dilakukan mengacu pada British Standards 373:57. Hasil penelitian menunjukkan bahwa kayu yang diteliti termasuk dalam kelas kuat II-III. Dari perhitungan analisis varian, tempat tumbuh berpengaruh nyata pada modulus patah (MoR) keteguhan lengkung statik, keteguhan tekan tegak lurus serat maksimum, keteguhan geser, dan kekerasan. Secara keseluruhan, kecuali untuk nilai MoR, sampel kayu dari Nglipar memberikan nilai kekuatan yang lebih tinggi. Pengaruh arah aksial dan radial pohon secara umum tidak begitu terlihat pada semua parameter kekuatan kecuali di keteguhan belah. Meskipun berkorelasi secara linier, hanya korelasi moderat yang diamati dari hubungan sifat mekanika (MoR/keteguhan geser) dan kerapatan dasar. Tidak ada korelasi nyata antara kerapatan dasar dan modulus elastisitas keteguhan lengkung statik serta antara kerapatan dasar dan keteguhan tekan sejajar serat maksimum.

Kata kunci: Tectona grandis, sifat mekanika, kerapatan dasar, hutan rakyat, Gunungkidul.

 

A study of teak wood quality from community forests in Gunungkidul  IV. Mechanical Properties

Abstract

Mechanical properties of sawn timber are the most important characteristics in many applications, particularly for structural timber. The previous paper in this series reported on the physical properties of teak trees at different sites (Panggang, Playen, Nglipar) from community forests in Gunungkidul regency. In this study, the mechanical properties were evaluated according to British Standards 373:57. The results showed that the timber were classified in the II-III of strength class. By analysis of variance, site factor affected the values of modulus of rupture (MoR) in statical bending strength, maximum compression perpendicular to grain strength, shear strength and hardness. In general, except for MoR, the wood samples from Nglipar gave higher strength levels. Except for cleavage strength, the effects of the axial and radial position of the tree on mechanical properties were mostly negligible. Although linearly related, only modest correlations were observed between the mechanical parameters (MoR/shear strength) and basic density. No significant correlation was found between the values of basic density and modulus of elasticity of static bending strength as well as between basic density and the strength of maximum compression parallel to grain.


Keywords


Tectona grandis; mechanical properties; basic density; community forest; Gunungkidul

Full Text:

PDF


References

  1. Bhat KM & Priya PB. 2004. Influence of provenance variation on wood properties of teak from the Western Ghat region in India. IAWA Journal 25, 273-282.
  2. Bhat KM, Priya PB, & Rugmini P. 2001. Characterisation of juvenile wood in teak. Wood Science and Technology 34, 517-532.
  3. British Standard Institution. 1957. British Standard 373:1957. Testing small clear specimens of timber, BSI, London.
  4. Dresch HE, & Dinwoodie JM. 1996. Timber; Structure, Properties, Conversion and Use. Macmillan Press, London.
  5. Firmanti A, Bachtiar ET, Surjokusumo S, Komatsu K, & Kawai S. 2005. Mechanical stress grading of tropical timbers without regard to species. Journal of Wood Science 51, 339-347.
  6. Hadjib N, Muslich M, & Sumarni G. 2006. Sifat fisis dan mekanis kayu jati super dan jati lokal dari beberapa daerah penanaman. Jurnal Penelitian Hasil Hutan 24(4), 13-31.
  7. Hidayati F, Ishiguri F, Iizuka K, Makino K, Marsoem SN, & Yokota S. 2014. Among-clone variations of anatomical characteristics and wood properties in Tectona grandis planted in Indonesia. Wood and Fiber Science 46(3), 1-9.
  8. Johanson CJ. 2002. Grading of timber with respect to mechanical properties. Timber engineering. Wiley, New York, 23-43.
  9. Kementrian Kehutanan. 2012. Statistik Kehutanan Indonesia 2011. Kementerian Kehutanan. 205.
  10. Koch J, Bauch J, Puls J, & Schwab E. 2000. Biological, chemical and mechanical characteristics of “wulst-holz” as a response to mechanical stress in living trees of Picea abies [L.]. Holzforschung 54, 137-143.
  11. Koch P. 1964. Wood Machining Processes. The Ronald Press Company. 74-76.
  12. Marsoem SN. 2013. Studi mutu kayu jati di hutan rakyat Gunung Kidul. I. Pengukuran laju pertumbuhan. Jurnal Ilmu Kehutanan 7, 108-122
  13. Marsoem SN, Prasetyo VE, Sulistyo J, Sudaryono, & Lukmandaru G. 2014. Studi mutu kayu jati di hutan rakyat Gunung Kidul. III. Sifat fisika kayu. Jurnal Ilmu Kehutanan 8, 75-88.
  14. Martawijaya A , Kartasudjana I, Kadir K, & Amongprawira S. 2005. Atlas Kayu Indonesia Jilid I. Balai Penelitian Hasil Hutan. Badan Litbang Kehutanan. Bogor, Indonesia.
  15. Miranda I, Sousa V, & Pereira H. 2011. Wood properties of teak (Tectona grandis) from a mature unmanaged stand in East Timor. Journal of Wood Science 57, 171-178.
  16. Okai R, Frimpong-Mensah K, & Yeboah D. 2004. Characterization of strength properties of branchwood and stemwood of some tropical hardwood species. Wood Science and Technology 38(2), 163-171.
  17. Panshin AJ & de Zeeuw C. 1980. Textbook of Wood Technology. 4th Ed. Structure, Identification, Properties, and Uses of the Commercial Woods of the United States and Canada. McGraw-Hill Book Company, New York.
  18. Perpinal E & Pietrarelli L. 1995. Physical and mechanical properties of Prosopis flexuosa and Prosopis nigra wood from the Dry Chaco, Argentina. Holz als Roh- und Werkstoff 53, 83-85
  19. Shmulsky R & Jones PD. 2011. Forest Products and Wood Science: An Introduction, Sixth Edition. John Wiley & Sons, Inc.
  20. Stalnaker JJ & Harris EC. 1989. Structural Design in Wood Structural Engineering Series. Van Nostrand Reinhold, 115 5th Avenue, New York, NY 10003. 120-127.
  21. Steffen A, Johansson CJ, & Wormuth EW. 1997. Study in the relationship between flat-wise and edge-wise moduli of elasticity of sawn timber as a means to improve mechanical strength grading technology. Hoz als Roh- und Werkstoff 55, 245-253.
  22. Sulistyo J & Marsoem SN. 2000. Pengaruh umur terhadap sifat fisika dan mekanika kayu jati (Tectona grandis L.f). Prosiding Seminar Nasional II MAPEKI. Yogyakarta, 2-3 September 1999. 49-63.
  23. Thulasidas PK & Bhat KM. 2012. Mechanical properties and wood structure characteristics of 35-year old home-garden teak from wet and dry localities of Kerala, India in comparison with plantation teak. Journal of Indian Academy of Wood Science 9(1), 23-32.
  24. Tsoumis G.1991. Science and Technology of Wood. Van Nostrand Reinhold, New York.
  25. Wahyudi I & Arifien AF. 2005. Perbandingan struktur anatomis, sifat fisis, dan sifat mekanis kayu jati unggul dan kayu jati konvensional. Jurnal Ilmu & Teknologi Kayu Tropis 3 (2), 9-15.
  26. Yunianti AD, Wahyudi I, Siregar IZ, & Pari G. 2011. Jurnal Ilmu & Teknologi Kayu Tropis 9(1), 93-100.
  27. Zhang SY. 1997. Wood specific gravity-mechanical relationship at species level. Wood Science and Technology 31,181-191.



DOI: https://doi.org/10.22146/jik.10197

Article Metrics

Abstract views : 9036 | views : 9739

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2015 Jurnal Ilmu Kehutanan

License URL: https://creativecommons.org/licenses/by-nc-sa/4.0/

© Editorial Board Jurnal Ilmu Kehutanan
Faculty of Forestry, Universitas Gadjah Mada
Building D 2nd floor
Jl. Agro No 1, Bulaksumur, Sleman 55281
Phone. +62-274-512102, +62-274-550541, +62-274-6491420
Fax. +62-274-550541 E-mail : jik@ugm.ac.id
former website : jurnal.ugm.ac.id/jikfkt/
new website : jurnal.ugm.ac.id/v3/jik/

 

Indexed by:

 

Jurnal Ilmu Kehutanan is under the license of Creative Commons Attribution-ShareAlike 4.0 International