Sifat Fisika Mekanika dan Ketahanan Papan Partikel Bambu dengan Perekat Asam Sitrat terhadap Serangan Rayap Kayu Kering

https://doi.org/10.22146/jik.10180

Ragil Widyorini(1*), Ari Puspa Yudha(2), Ganis Lukmandaru(3), Tibertius Agus Prayitno(4)

(1) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan Universitas Gadjah Mada Jl. Agro No. 1 Bulaksumur, Sleman 55281
(2) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan Universitas Gadjah Mada Jl. Agro No. 1 Bulaksumur, Sleman 55281
(3) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan Universitas Gadjah Mada Jl. Agro No. 1 Bulaksumur, Sleman 55281
(4) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan Universitas Gadjah Mada Jl. Agro No. 1 Bulaksumur, Sleman 55281
(*) Corresponding Author

Abstract


Penelitian mengenai penggunaan asam sitrat sebagai agen pengikat alami masih relatif sedikit. Oleh karena itu penelitian ini difokuskan pada pengaruh jumlah asam sitrat dan suhu pengempaan terhadap sifat papan partikel bambu, termasuk ketahanannya terhadap serangan rayap kayu kering. Bahan penelitian adalah partikel bambu petung. Komposisi kimia bahan baku bambu diuji untuk kadar ekstraktif, holoselulosa, lignin, dan alfa selulosa. Faktor pada penelitian ini adalah jumlah asam sitrat (0 - 40%) berdasarkan berat kering udara partikel) dan suhu pengempaan (200 oC dan 220 oC). Sifat fisika dan mekanika papan partikel diuji berdasarkan standar pengujian JIS A 5908. Analisis menggunakan Fourier transform infrared spectroscopy (FTIR) juga dilakukan untuk mengetahui perubahan gugus ester pada berbagai jumlah asam sitrat dan suhu pengempaan. Pengujian ketahanan terhadap serangan rayap kayu kering juga dilakukan dengan menghitung nilai pengurangan berat dan mortalitas rayap setelah 6 minggu. Hasil pengujian menunjukkan bahwa interaksi kedua faktor berpengaruh nyata terhadap nilai pengembangan tebal, penyerapan air, modulus elastisitas dan modulus patah. Intensitas gugus C=O yang ditunjukkan pada puncak 1720 cm-1 semakin bertambah besar seiiring dengan semakin banyaknya jumlah asam sitrat, yang menyebabkan kekuatan perekatan dan stabilitas dimensi papan partikel menjadi semakin kuat. Kondisi optimum pada penelitian ini adalah papan partikel dengan penambahan jumlah asam sitrat 20 % pada suhu pengempaan 200 oC dengan kualitas yang dapat memenuhi standar JIS A 5908 tipe 8. Penambahan asam sitrat dapat meningkatkan mortalitas rayap kayu kering secara nyata. Penambahan 20 % asam sitrat pada suhu pengempaan 200 oC menghasilkan nilai pengurangan berat 0,9 % dan mortalitas rayap 57 %.

Kata kunci: bambu petung, asam sitrat, suhu pengempaan, jumlah asam sitrat.

 

Mechanical properties and durability against the dry termite attacks of particleboard made from bamboo with citric acid as adhesive 

Abstract

Research on development of citric acid as natural adhesive are still limited. Therefore this research focused on effects of citric acid content and pressing temperature on properties of particleboard made from bamboo, including its durability to the dry termite attacks. Petung bamboo particles were used as raw materials. Chemical characteristics of petung bamboo were analyzed for its extractive, lignin, holocellulose and alpha cellulose. Factors used in this research were citric acid content (0 - 40 %) based on dry weight particles and pressing temperature (200 oC dan 220 oC). Properties of the particleboard were analyzed based on Japanese Industrial Standard (JIS) A 5908 for particleboard. Fourier transform infrared spectroscopy (FTIR) analysis was used for investigating the changes of ester groups at various citric acid content and pressing temperature. The dry termite resistance was then analyzed for its weight loss and mortality after 6 weeks. The results showed that interaction between two factors affected significantly on thickness swelling, water absorption, modulus of elasticity, and modulus of rupture. Intensity of C=O groups became stronger as increasing citric acid content, providing high mechanical properties and high dimensional stability. Optimum condition in this research was achieved at 20 % of citric acid content and 200 oC of pressing temperature, which the board properties met the requirement of JIS A 5908 type 8. Increasing of citric acid content would also increase the dry termite mortality. Addition of 20 % citric acid at 200 oC of pressing temperature produced particleboard with the weight loss was 0.9 % and 57 % of the dry termite mortality.

 


Keywords


petung bamboo; citric acid; citric acid content; pressing temperature

Full Text:

PDF


References

  1. ASTM. 1984. Annual Book of ASTM Standards. American Society for Testing and Materials. Philadelpia.
  2. ASTM. 2002. Annual Book of ASTM Standards. Section Four Construction Volume 04.10 Wood. Baltimore.
  3. Browning BL. 1967. Methods of Wood Chemistry Volume II. Interscience Publisher, John Wiley and Sons, Inc. New York.
  4. Japanese Standard Association. 2003. Japanese Industrial Standard for Particleboard A 5908. Japanese Standard Association. Tokyo.
  5. Japanese Industrial Standard. 2004. JIS K 1571 Test Methods for Determining the Effectiveness of Wood Preservatives and Their Performance Requirements. Japanese Standard Association. Tokyo.
  6. Kamthai S & Puthson P. 2005. The physical properties, fiber morphology and chemical compositions of sweet bamboo (Dendrocalamus asper Backer). Kasetsart Journal (Natural Science) 39, 581-587.
  7. Laemsak N & Okuma M. 2000. Development of boards made from oil palm frond II: Properties of binderless boards from steam-exploded fibers of oil palm frond. Journal of Wood Science 46, 322-326.
  8. Liese W. 1985. Bamboos-Biology, Silvics, Properties, Utilization. Deutsche Gesellschaft Fur Technische Zusammenarbeit (GTZ) GmbH. Eschborn. Germany.
  9. McSweeny JD, Rowell RM, & Min S. 2006. Effect of citric acid modification of aspen wood on sorption of copper ion. Journal of Natural Fibers 3(1), 43-58.
  10. Okuda N & Sato M. 2006. Water resistance properties of kenaf core binderless boards. Journal of Wood Science 52, 422-428.
  11. Suzuki S, Shintani H, Park SY, Saito K, Laemsak N, Okuma M, & Iiyama K. 1998. Preparation of binderless boards from steam exploded pulps of oil palm (Elaeis guneensis Jaxq) fronds and structural characteristics of lignin and wall polysaccharides in steam exploded pulps to be discussed for self-bonding. Holzforschung 52, 417-426.
  12. Technical Association for the Pulp and Paper Industries. 1992. Acid-insoluble in wood and pulp. TAPPI Test Method T 222 os-74. TAPPI Press. Atlanta.
  13. Thanh ND & Nhung HL. 2009. Cellulose modified with citric acid and its absorption of Pb2+ and Cd2+ Ions. Proceedings of 13rd International Electronic Conference on Synthetic Organic Chemistry (ECSOC-13).
  14. Umemura K, Ueda T, Munawar SS, & Kawai S. 2011. Application of citric acid as natural adhesive for wood. Journal of Applied Polymer Science 123,1991-1996
  15. Umemura K, Ueda T, & Kawai S. 2012. Characterization of wood-based molding bonded with citric acid. Journal of Wood Science 58,38-45.
  16. Vukusic SB, Katovic D, Schramm C, Trajkovic J, & Sefc B. 2006. Polycarboxylic acids as non-formaldehyde anti-swelling agents for wood. Holzforschung 60, 439-444.
  17. Walther T, Kartal SN, Hwang WJ, Umemura K, & Kawai S. 2007. Strength, decay, and termite resistance of oriented kenaf fiberboards. Journal of Wood Science 53, 481-486.
  18. Widyorini R, Higashihara T, Xu J, Watanabe T, & Kawai S. 2005. Self-bonding characteristics of binderless kenaf core composites. Wood and Science Technology 39, 651-662.
  19. Widyorini R, Yudha AP, Adifandi Y, Umemura K, & Kawai S. 2013. Characteristics of bamboo particleboard bonded with citric acid. Wood Research Journal 4(1), 31-35.
  20. Widyorini R, Yudha AP, Isnan R, Awaludin A, Prayitno TA, Ngadianto A, & Umemura K. 2014. Improving the physico-mechanical properties of eco-friendly composite made from bamboo. Advanced Material Research 896, 562-565.
  21. Xu J, Han G, & Kawai S. 2003. Development of binderless particleboard from kenaf core using steam-injection pressing. Journal of Wood Science 49, 327-332.



DOI: https://doi.org/10.22146/jik.10180

Article Metrics

Abstract views : 9030 | views : 9300

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2015 Jurnal Ilmu Kehutanan

License URL: https://creativecommons.org/licenses/by-nc-sa/4.0/

© Editorial Board Jurnal Ilmu Kehutanan
Faculty of Forestry, Universitas Gadjah Mada
Building D 2nd floor
Jl. Agro No 1, Bulaksumur, Sleman 55281
Phone. +62-274-512102, +62-274-550541, +62-274-6491420
Fax. +62-274-550541 E-mail : jik@ugm.ac.id
former website : jurnal.ugm.ac.id/jikfkt/
new website : jurnal.ugm.ac.id/v3/jik/

 

Indexed by:

 

Jurnal Ilmu Kehutanan is under the license of Creative Commons Attribution-ShareAlike 4.0 International