Pengaruh Suhu dan Metode Perlakuan Panas terhadap Sifat Fisika dan Kualitas Finishing Kayu Mahoni

https://doi.org/10.22146/jik.10160

Ragil Widyorini(1*), Khusnul Khotimah(2), Tibertius Agus Prayitno(3)

(1) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada Jl. Agro No. 1, Bulaksumur, Sleman 55281
(2) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada Jl. Agro No. 1, Bulaksumur, Sleman 55281
(3) Bagian Teknologi Hasil Hutan, Fakultas Kehutanan, Universitas Gadjah Mada Jl. Agro No. 1, Bulaksumur, Sleman 55281
(*) Corresponding Author

Abstract


Perlakuan panas dikenal sebagai metode yang dapat digunakan untuk meningkatkan stabilitas dimensi dan menurunkan higroskopisitas. Di sisi lain, perlakuan panas dapat membuat warna kayu menjadi lebih gelap, penurunan sifat mekanika kayu, dan sifat wetabilitas kayu. Oleh karena itu, penelitian mengenai perlakuan panas pada kondisi yang optimum sangat menarik untuk dilakukan agar menghasilkan kayu dengan kualitas yang lebih baik. Tujuan penelitian ini adalah mengetahui pengaruh interaksi suhu dan metode perlakuan panas terhadap sifat fisika dan kualitas finishing kayu mahoni. Contoh uji perlakuan dibuat dari kayu mahoni yang berasal dari industri penggergajian kayu rakyat. Penelitian ini menggunakan 2 metode perlakuan panas yaitu metode oven dan penguapan (steaming) pada variasi suhu 90°C, 120°C, dan 150°C selama 2 jam waktu efektif. Pengujian sifat fisika diuji berdasarkan standar ASTM, yang meliputi : kadar air seimbang, perubahan dimensi, perubahan warna, dan wetabilitas. Pengujian finishing meliputi cross cut test, uji delaminasi, dan uji kekilapan (glossy test). Hasil penelitian menunjukkan bahwa interaksi antara suhu dan metode perlakuan panas berpengaruh sangat nyata terhadap perubahan warna, serta berpengaruh nyata terhadap penyusutan radial, cross cut test, dan uji delaminasi. Metode oven menghasilkan contoh uji dengan kadar air dan pengembangan radial yang lebih rendah, warna yang lebih terang, serta uji delaminasi yang lebih baik dibandingkan dengan metode penguapan.

Kata kunci: perlakuan panas, metode oven, metode penguapan, suhu, finishing

 

Effect of temperature and heat treatment on physical properties and finishing quality of mahagony wood

Abstract

Heat treatment is well known as a method for increasing dimensional stability and reducing hygroscopicity of wood. However, heat tratment can cause the color of wood become darker and reduce the wettability, as well as its mechanical properties. Therefore, the optimum condition of heat treatment is essential to be studied to obtain the high quality of properties treated wood. This research focused on investigating the heating temperature and treatment method on physical properties and finishing quality of mahagony wood. Two treatment methods, i.e. oven method and steaming method, were used in this research. The heating temperatures were set at 90°C, 120°C, and 150°C. The effective heating time was 2 h. The wood physical properties were tested according to ASTM standards and wood finishing quality were tested for its cross cut, delamination, and glossy test. The results showed that interaction between treatment method and heating temperature affected significantly on the change in color, radial shrinkage, cross cut test, and delamination test. Oven method resulted in reducing moisture content and radial shrinkage, light color, and better quality of wood, compared to steaming method. 

 


Keywords


heat treatment; oven method; steaming method; heating temperature; finishing properties

Full Text:

PDF


References

  1. Anonim. 1957. British Standars Methods of Testing Small Clear Speciment of Timber. British Standard Institution Decoporated by Royal Charter British Standar House. London
  2. Anonim. 1995. Panduan Proses Wood Finishing di PT. Sunjaya Coating Perdana Surabaya. PT. Sunjaya Coating Perdana, Surabaya.
  3. Anonim. 2009. www.dinhut.jatengprov.go.id. Diakses tanggal 8 Januari 2012.
  4. Awoyemi L & Jones IP. 2011. Anatomical explanation for changes in properties of Western Red Cedar (Thuja plicata) wood during heat treatment. Wood Sci Technol. 45, 261-267
  5. Bodig J. 1962. Wettability Related to Gluabilities of Five Philippine Mahagonies. Forest Product J 12 (6), 265-270
  6. Boonstra MJ, Van Acker J, & Kegel E. 2007. Strength properties of thermally modified softwoods and its relation to polymeric structural wood constituents. Ann For Sci 64, 679-690
  7. Dwianto W & Norimoto M. 1999. Peningkatan Sifat Kekuatan Kayu dengan Perlakuan Suhu Tinggi yang Optimum. Prosiding Masyarakat Peneliti Kayu Indonesia (MAPEKI). Yogyakarta.73-79.
  8. Esteves B, Marquez AV, Domingos I, & Pererira H. 2007. Influence of steam heating on the properties of pine (Pinus pinaster) and eucalypt (Eucalyptus globulus). Wood Sci Technol 41, 193-207.
  9. Esteves B, Domingos I, & Pereira H. 2008. Pine wood modification by heat treatment in air. BioResources 3(1), 142-154.
  10. Esteves B & Pereira H. 2009. Wood modification by heat treatment: A Review. BioResources 4(1), 370-404.
  11. Forbes C. 1998. Wood Surface Inactivation and Adhesive Bonding. North Caroline State University Press.
  12. Kocaefe D, Poncsak S, Dore G, & Younsi R. 2008. Effect of heat treatment on wettability of White Ash and Soft Maple by water. Holz Roh Werkst 66, 355-361.
  13. Korkut DS, Korkut S, Bekar I, Budakçý M, Dilik T & Çakýcýer N. 2008. The effects of heat treatment on the physical properties and surface roughness of Turkish hazel (Corylus colurna L.) wood. International Journal of Sciences. 1772-1783.
  14. Muslich M & Krisdianto. 2006. Upaya peningkatan kualitas kayu hutan rakyat sebagai bahan baku industri. Prosiding Seminar Hasil Litbang Hasil Hutan. Bogor. 110-129.
  15. Sernek M, Boonstra M, Pizzi A, Despres A & G ́erardin P. 2008. Bonding performance of heat treated wood with structural adhesives. Holz Roh Werkst 66, 173-180.
  16. SNI. 2000. Standar Nasional Indonesia 01-5008.2. Badan Standarisasi Nasional. Indonesia.
  17. Stevenson P. 2003. Finish coatings system adhesion and test methods. Wood Digest’s Finishing, 17-20.
  18. Todaro L, Zuccaro L, Marra M. Basso B, & Scopa A. 2012. Steaming effects on selected wood properties of Turkey Oak by spectral analysis. Wood Sci Technol. 46, 89-100.
  19. Tsoumis G. 1991. Science and Technology of Wood (Structure, Properties, Utilization). Van Nostrand Reinhold Company, New York.
  20. Varga D & van der Zee ME. 2008. Influence of steaming on selected wood properties of four hardwood spesies. Holz Roh Werkst. 66,11-18
  21. Windeisen E, Strobel C, & Wegener G. 2007. Chemical changes during the production of thermo-treated beech wood. Wood Sci Technol 41, 523-536.
  22. Yildiz S, Gezer ED, & Yildiz UC. 2006. Mechanical and chemical behaviour of Spruce Wood modified by heat. Building and Environment 41, 1762-1766.



DOI: https://doi.org/10.22146/jik.10160

Article Metrics

Abstract views : 33481 | views : 59447

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2014 Jurnal Ilmu Kehutanan

License URL: https://creativecommons.org/licenses/by-nc-sa/4.0/

© Editorial Board Jurnal Ilmu Kehutanan
Faculty of Forestry, Universitas Gadjah Mada
Building D 2nd floor
Jl. Agro No 1, Bulaksumur, Sleman 55281
Phone. +62-274-512102, +62-274-550541, +62-274-6491420
Fax. +62-274-550541 E-mail : jik@ugm.ac.id
former website : jurnal.ugm.ac.id/jikfkt/
new website : jurnal.ugm.ac.id/v3/jik/

 

Indexed by:

 

Jurnal Ilmu Kehutanan is under the license of Creative Commons Attribution-ShareAlike 4.0 International