Kinetics of Oil-in-Water Emulsion Stabilization using Lecithin and Biosilica

https://doi.org/10.22146/ajche.49560

Lanny Sapei(1*), Olivia Poppy Damayanti(2), Liliana Liliana(3)

(1) Department of Chemical Engineering, Faculty of Engineering, University of Surabaya, Raya Kalirungkut, Surabaya 60293 East Java, Indonesia, Phone: +62 31 2981158, Fax: +62 31 2981178
(2) Department of Chemical Engineering, Faculty of Engineering, University of Surabaya, Raya Kalirungkut, Surabaya 60293 East Java, Indonesia, Phone: +62 31 2981158, Fax: +62 31 2981178
(3) Department of Chemical Engineering, Faculty of Engineering, University of Surabaya, Raya Kalirungkut, Surabaya 60293 East Java, Indonesia, Phone: +62 31 2981158, Fax: +62 31 2981178
(*) Corresponding Author

Abstract


Oil-in-water (O/W) emulsion has been widely used in food emulsions such as mayonnaise, dressings, and sauces. However, O/W emulsion is inherently thermodynamically unstable and easily destabilizes with time. Synthetic polymeric emulsifiers have been commonly used to stabilize these emulsions. However, those synthetic emulsifiers may induce obesity and other unexpected side-effects. In this experiment, bio-emulsifier mixtures consisting of soy lecithin and bio-silica were combined to stabilize the o/w emulsion in order to obtain more healthful food emulsions with acceptable quality. Lecithin concentrations were varied from 0.05-1.5% and concentrations of pure bio-silica particles derived from rice husks were in the range of 0.5-3%. The effects of the concentrations of these emulsifier mixtures on the O/W emulsions stability were studied. Additionally, the effects of storage temperatures on the O/W emulsions stability in the presence of both lecithin and bio-silica were investigated. The kinetics parameters of resulting O/W emulsions were analyzed using zero and first order kinetic models. In general, emulsions destabilized with time and followed the first order kinetic model. The destabilization rates of emulsions in the presence of emulsifier mixture would decrease by approximately 25-50% as compared to the destabilization rates of emulsions in the presence of lecithin or bio-silica as their sole emulsifier. Variations of lecithin and bio-silica concentrations in the emulsifier mixtures were not significant to the O/W emulsions stabilization. Furthermore, destabilization rate constants of O/W emulsions stored at the refrigerated temperature were ~2 times lower than those stored at room temperature.

Keywords


oil-in-water emulsion; biosilica; lecithin; emulsifier; kinetics; first order

Full Text:

PDF


References

  1. Abend, S., Bonnke, N., Gutschner, U., and Lagaly, G. (1998). Stabilization of emulsions by heterocoagulation of clay minerals and layered double hydroxides, Colloid and Polymer Science, 276, 730-737.
  2. Binks, B. P. and Lumsdon, S.O. (2000). Catastrophic phase inversion of water- in-oil emulsions stabilized by hydrophobic silica, Langmuir, 16, 25392547.
  3. Binks, B.P., Clint, J.H., Whitby, C.P. (2005). Rheological behavior of water- in-oil emulsions stabilized by hydrophobic bentonite particles, Langmuir, 21, 53075316.
  4. Chevalier, Y. and Bolzinger, M.-A. (2013). Emulsions stabilized with solid nanoparticles: Pickering emulsions, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 439, 2334.
  5. Eskandar, N.G., Simovic, S., and Prestidge, C.A. (2011). Interactions of Hydrophilic Silica Nanoparticles and Classical Surfactants at Non-Polar Oil- Water Interface, Journal of Colloid and Interface Science, 358, 217225.
  6. Koglin, A., Doetsch, V., and Bernhard, F. (2010). Molecular engineering aspects for the production of new and modified biosurfactants. In: Biosurfactants, vol. 672, R. Sen, ed, Springer, New York, 158169.
  7. Levenspiel, O. (1999). Chemical Reaction Engineering, 3 rd ed. John Wiley & Sons, New York. 4147
  8. Mirhosseini, H., Tan, C.P., Aghlara, A., Hamid, N.S.A., Yusof, S., and Chern, B.H. (2008). Influence of Pectin and CMC on Physical Stability, Turbidity Loss Rate, Cloudiness and Flavor Release of Orange Beverage Emulsion during Storage, Carbohydrate Polymers, 73, 8391.
  9. Pichot, R., Spyropoulos, F., and Norton, I. T. (2010). O/W emulsions stabilised by both low molecular weight surfactants and colloidal particles: The effect of surfactant type and concentration, Journal of colloid and interface science, 352, 128135.
  10. Pichot, R., Spyropoulos, F., and Norton, I.T. (2009). Mixed-Emulsifier Stabilised Emulsions: Investigation of the Effect of Monoolein and Hydrophilic Silica Particle Mixtures on the Stability Against Coalescence, Journal of Colloid and Interface Science, 329, 284291.
  11. Simmons, A.L. , Schlezinger, J. J., and Corkey, B. E. (2014). What are we putting in our food that is making us fat? Food additives, contaminants, and other putative contributors to obesity,” Current obesity reports, 3, 273285.
  12. Tempel, M.v.D. (1953). Stability of Oil- in-Water Emulsions II : Mechanism of The Coagulation of an Emulsion, Recueil des Travaux Chimiques des Pays-Bas, 72, 433441.
  13. Wang, B., Wang, L. J., Li, D., Adhikari, B., and Shi, J. (2011). Effect of gum Arabic on stability of oil-in-water emulsion stabilized by flaxseed and soybean protein, Carbohydrate polymers, 86, 343351.
  14. Wanli, K., Yi, L., Baoyan, Q., Guangzhi, L., Zhenyu, Y., and Jichun, H. (2000). Interactions between Alkali/Surfactant/Polymer and Their Effects on Emulsion Stability, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 175, 243247.



DOI: https://doi.org/10.22146/ajche.49560

Article Metrics

Abstract views : 4524 | views : 2081

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.