Date Log
Submitted
Nov 4, 2022
Accepted
Feb 5, 2024
Published
Mar 25, 2024
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
The Effect of Wood Species and Laminae Composition on the Properties of Cross-Laminated Beam Made from Community Forest Wood
Corresponding Author(s) : Greitta Kusuma Dewi
greitta.k.d@ugm.ac.id
Jurnal Ilmu Kehutanan,
Vol 18 No 1 (2024): March
Abstract
Community forests offer diverse wood species and quantities, potentially meeting the increasing demand for wood-building materials driven by the green building concept. The diverse species have varied specific gravity. Combining wood species and cross-lamination engineering could improve the strength and dimensional stability of low-density and medium-density wood from community forests. Therefore, this research aimed to determine the effect of wood species and laminae composition on the properties of 5-ply cross-laminated beams (CLB). The 5-ply CLB was made in 5 cm x 5 cm x 112 cm with 1 cm laminae thickness. The species used were sengon, jabon, and mahogany, with acacia as enforcement. This research also compared homogeneous and heterogeneous laminae composition. The results showed that wood species and laminae composition significantly affect the mechanical properties. Heterogeneous compositions had higher mechanical properties than homogeneous compositions. The delamination test revealed that the CLB had high water resistance on cold and hot immersion even though the beams used up to three wood species.
Keywords
Cross-laminated beam
community forests wood
laminae composition
physical and mechanical properties
wood species
Dewi, G. K., Prayitno, T. A., & Widyorini, R. (2024). The Effect of Wood Species and Laminae Composition on the Properties of Cross-Laminated Beam Made from Community Forest Wood. Jurnal Ilmu Kehutanan, 18(1), 71-79. https://doi.org/10.22146/jik.v18i1.6042
Download Citation
Endnote/Zotero/Mendeley (RIS)BibTeX
References
- Aicher S, Ahmad Z, Hirsch M. 2018. Bondline shear strength and wood failure of European and tropical hardwood glulams. European Journal of Wood and Wood Products 76:1205-1222. doi: 10.1007/s00107-018-1305-0
- ASTM. 1994. ASTM D143. Standard test method for small clear specimen of timber. Annual Books of ASTM Standard. Pennsylvania.
- ASTM. 1998. ASTM D905. Standard test method for strength properties of adhesive bonds in shear by compression loading. Annual Books of ASTM Standard. Pennsylvania.
- BSI. 1957. British 373. Methods of testing small clear specimens of timber. BSI. London.
- CEN. 2001. BS EN 386: Glued laminated timber-Performance requirements minimum production requirements. Comité européen de normalization/European Committee for Standardization. Brussels.
- Bodig J, Jayne BA. 1982. Mechanics of wood and wood composites. Van Nostrand Reinhold, New York.
- Borgstorm E, Fröbel J. 2019. The CLT Handbook: CLT structures-facts and planning. Hlm. 8-11. Swedish Wood, Stockholm.
- Brandner R, Flatscher G, Ringhofer A, Schickhofer G, Thiel A. 2016. Cross laminated timber (CLT): overview and development. European Journal of Wood and Wood Products 74:331-351. doi: 10.1007/s00107-015-0999-5
- Choi C, Yuk CR, Yoo JC, Park JY, Lee CG, Kang SG. 2015. Physical and mechanical properties of cross laminated timber using plywood as core layer. Journal of the Korean Wood Science and Technology. 43(1):86-95. doi: 10.5658/WOOD.2015.43.1.86
- FPL. 2010. Wood handbook: Wood as an engineering material. Hlm. 1-5. General Technical Report FPL-GTR, Madison, US.
- FWI. 2020. Menelisik angka deforestasi pemerintah. https://fwi.or.id/menelisik-angka-deforestasi-pemerintah. Diakses pada tanggal 23 Februari 2021.
- Hein PRG, Brancheriau L. 2018. Comparison between three-point and four-point flexural tests to determine wood strength of Eucalyptus specimens. Maderas. Ciencia y Tecnología 20(3):333-342. doi: 10.4067/S0718-221X2018005003401
- IAWA. 1989. IAWA list of microscopic features for hardwood identification. IAWA Bulletin 10(3):219-332.
- Jariyah NA, Wahyuningrum N. 2008. Karakteristik hutan rakyat di Jawa. Jurnal Penelitian Sosial dan Ekonomi Kehutanan 5(1):43-56. doi: 10.20886/jpsek.2008.5.1.43-56
- Jiang Y, Schaffrath J, Knorz M, Winter S, van de Kuilen JW. 2014. Applicability of various wood species in glued laminated timber - parameter study on delamination resistance and shear strength. Proceeding of World Conference on Timber Engineering (WCTE). 10-14 Agustus 2014, Quebec.
- JSA (Japanese Standard Assosiation). 2007. Glued laminated timber. JAS 234:2003. Ministry of Agriculture, Forestry, and Fisheries, Tokyo, Japan.
- Komariah RN, Hadi YS, Massijaya MY, Suryana J. 2015. Physical mechanical properties of glued laminated timber made from tropical small-diameter logs grown in Indonesia. Journal of the Korean Wood Science and Technology 43(2):156-167. doi: 10.5658/WOOD.2015.43.2.156
- Kukk V, Bella A, Kers J, Kalamees T. 2021. Airtightness of cross-laminated timber envelopes: Influence of moisture content, indoor humidity, orientation, and assembly. Journal of Building Engineering 44, 102610. doi: 10.1016/j.jobe.2021.102610
- Kretschman, D.E. 2010. Mechanical Properties of Wood. Hlm. 5.1-5.46 dalam Ross, Robert J, editor. Wood handbook wood as an engineering material: General Technical Report FPL-GTR-282. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison.
- Lam F, Prion HGL. 2003. Engineered wood products for structural purposes. Hlm. 81-102 dalam Thelandersson S, Larsen HJ, editor. Timber Engineering. Jhon Wiley & Sons, Ltd, New York.
- Lestari ASRD, Hadi YS., Hermawan D, Santoso A. 2015. Glulam properties of fast-growing species using mahogany tannin adhesive. Bioresources 10(4):7419–7433. doi: 10.15376/biores.10.4.7419-7433
- Lestari, A.S.R.D., Hadi Y.S., Hermawan D, Santoso A. 2018. The physical and mechanical properties of glulam made from pine and jabon woods. Jurnal Ilmu Teknolologi Kayu Tropis 16(1):93-101. doi: 10.51850/jitkt.v16i1.445.g371
- Li H, Wang L, Wei Y, Wang BJ, Jin H. 2022. Bending and shear performance of cross-laminated timber and glued-laminated timber beams: A comparative investigation. Journal of Building Engineering 45. 103477. doi: 10.1016/j.jobe.2021.103477
- Rahayu IS, Zaini LH, Nandika D, Darmawan W, Prihatini E, Agustian R. 2020. Physical properties of impregnated sengon wood by monoethylen glycol and nano silica from betung bamboo sticks. IOP Conference Series: Materials Science and Engineering 935. 012057. doi: 10.1088/1757-899X/935/1/012057
- Sikora KS, McPolin DO., Harte AM. 2015. Shear strength and durability testing of adhesive bonds in cross-laminated timber. The Journal of Adhesion 92(7-9):758–777. doi: 10.1080/00218464.2015.1094391
- Statistik Lingkungan Hidup dan Kehutanan. 2019. Statistik lingkungan hidup dan kehutanan tahun 2018. Pusat Data dan Informasi Kementerian LHK Republik Indonesia, Jakarta.
- Tran DK, Jeong GY. 2021. Effects of wood species, connection system, and wall-support interface type on cyclic behaviors of cross-laminated timber (CLT) walls under lateral loads. Construction and Building Materials 280. 122450. doi: 10.1016/j.conbuildmat.2021.122450
- Vanya C. 2012. Damage problems in glued laminated timber. Drewno. Pr. Nauk. Donies. Komunik 55(188):115-128.
- Wahyudi I, Priadi T, Rahayu IS. 2014. Karakteristik dan sifat-sifat dasar kayu jati unggul umur 4 dan 5 tahun asal Jawa Barat. Jurnal Ilmu Pertanian 19(1):50-56.
- Wahyudi I, Harijadi AR. 2010. Fiber saturation point of several Indonesian lesser known species. Jurnal Ilmu dan Teknologi Kayu Tropis 8(1):88-92. doi: 10.51850/jitkt.v8i1.515.g421
- Yusoh AS, Tahir PM, Uyup MKA, Lee SH, Husain H, Khaidzir MO. 2021. Effect of wood species, clamping pressure and glue spread rate on the bonding properties of cross-laminated timber (CLT) manufactured from tropical hardwoods. Construction and Building Materials 273:121721. doi: 10.1016/j.conbuildmat.2020.121721