Observation of new bone penetration into titanium rods with various thread pitch

https://doi.org/10.22146/majkedgiind.93519

Tansza Setiana Putri(1*), Eddy Eddy(2), Astri Rinanti(3), Kunio Ishikawa(4)

(1) Department of Dental Materials, Faculty of Dentistry, Universitas Trisakti, Jakarta, Indonesia
(2) Department of Dental Materials, Faculty of Dentistry, Universitas Trisakti, Jakarta, Indonesia
(3) Department of Environmental Engineering, Faculty of Landscape Architecture and Environmental Technology, Universitas Trisakti, Indonesia
(4) Department of Biomaterials, Faculty of Dental Science, Kyushu University, Japan
(*) Corresponding Author

Abstract


Titanium is a gold standard material in dental implant treatment due to its biocompatibility and excellent mechanical strength. However, titanium has no bioactivity and osteoconductivity. This has led to studies to develop the osteoconductivity by modifying the surface morphology, such as the thread pitch, which affect the implant stability and bone formation around the implant. This study aims to evaluate the effect of various size of gaps (equivalent to thread pitch) on the bone formation in titanium rods implantation. Initially, titanium rods were cut with different blade sizes: 0.2, 0.3, and 0.4 mm. The gaps were equivalent to dental implant thread pitch. Titanium rods were implanted in the rat’s femur and inserted into the bone marrow. After 2 and 4 weeks of implantation, the rats were euthanized and the implanted femur were extracted. The femurs were resin-embedded and cut into 1-mm thickness. The specimens were observed by backscattered SEM. Two weeks after implantation, new bone started to form and penetrated the pitch. In the wider gaps, the bone penetration was found to be particularly high, and vice versa. After 4 weeks, the new bone formation was greater compared to 2 weeks of implantation, and more bone penetration was observed in the wider pitch. This study is an observational research with qualitative reading of the backscattered SEM images. In conclusion, wider pitch could increase osseointegration by providing larger space for bone formation.

Keywords


bone regeneration; dental implant; osseointegration; thread pitch; titanium



References

1. Sunarso, Toita R, Tsuru K, Ishikawa K. Immobilization of calcium and phosphate ions improves the osteoconductivity of titanium implants. Mater Sci Eng C. 2016; 68: 291–298. doi: 10.1016/j.msec.2016.05.090

2. Fabbro M Del, Taschieri S, Canciani E, Addis A, Musto F, Weinstein R, et al. Osseointegration
of titanium implants with different rough surfaces: a histologic and histomorphometric
study in an adult minipig model. Implant Dent. 2017; 26(3): 357–366.

3. Tang Z, Li X, Tan Y, Fan H, Zhang X. The material and biological characteristics of osteoinductive calcium phosphate ceramics. Regen Biomater. 2018; 5(1): 43–59.
doi: 10.1093/rb/rbx024

4. Kim J, Lee J, Kim JC, Lee J, Yeo IL. Biological responses to the transitional area of dental
implants: material- and structure-dependent responses of peri-implant tissue to abutments.
Materials (Basel). 2019; 13(1): 72.

5. Yamaguchi Y, Shiota M, Fujii M, Shimogishi M, Munakata M. Effects of implant thread design
on primary stability — a comparison between single- and double-threaded implants in an
artificial bone model. Int J Implant Dent. 2020; 6(1): 42.

6. Reinaldo E, Bonifacius S, Adenan A. Influence of short implant thread pitch and depth to
primary stability on D4 bone density : a laboratory study. J Int Oral Health. 2021; 13(5):
456–461. doi: 10.4103/JIOH.JIOH_82_21

7. Orsini E, Giavaresi G, Trirè A, Ottani V, Salgarello S. Osseointegration process : an in
vivo comparison study. Int J Oral Maxillofac Implant. 2012; 27(2): 383–392.

8. Ishak MI, Shafi AA, Khor CY, Faizal WMW. The effect of different dental implant thread
profiles on bone stress distribution. AIP Conf Proc. 2018; 2030(1): 020057.

9. Ryu H, Namgung C, Lee J, Lim Y. The influence of thread geometry on implant osseointegration under immediate loading : a literature review. J Adv Prosthodont. 2014;
6(6): 547–554. doi: 10.4047/jap.2014.6.6.547

10. Hussein FA, Salloomi KN, Abdulrahman BY, Zahawi AR Al, Sabri LA. Effect of thread depth
and implant shape on stress distribution in anterior and posterior regions of mandible
bone : A finite element analysis. Dent Res J (Isfahan). 2019; 16(3): 200–207.

11. Doe Y, Ida H, Seiryu M, Deguchi T, Takeshita N, Sasaki S, et al. Titanium surface treatment
by calcium modification with acid-etching promotes osteogenic activity and stability of
dental implants. Materialia. 2020; 12: 100801. doi: 10.1016/j.mtla.2020.100801

12. Teo AJT, Mishra A, Park I, Kim Y, Park W, Yoon Y. Polymeric Biomaterials for Medical
Implants and Devices. ACS Biomater Sci Eng. 2016; 2(4): 454–472.
doi: 10.1021/acsbiomaterials.5b00429

13. Eddy. Kalsium Sulfat sebagai Bone Graft. J Kedokt Gigi Terpadu. 2021; 3(2): 4–5.
14. Barba A, Diez-Escudero A, Maazouz Y, Rappe K, Espanol M, Montufar EB, et al.
Osteoinduction by foamed and 3D-Printed calcium phosphate scaffolds: effect of
nanostructure and pore architecture. ACS Appl Mater Interfaces. 2017; 9(48): 41722–
41736.

15. Chauhan P, Koul V, Bhatnagar N. Effect of acid etching temperature on surface physiochemical properties and cytocompatibility of Ti6Al4V ELI alloy. Mater Res Express. 2019; 6(10): 105412. doi: 10.1088/2053-1591/ab3ac5

16. Zhao Y, Li Z, Jiang Y, Liu H, Feng Y, Wang Z, et al. Bioinspired mineral hydrogels as
nanocomposite scaffolds for the promotion of osteogenic marker expression and the
induction of bone regeneration in osteoporosis. Acta Biomater. 2020; 113: 614–626.
doi: 10.1016/j.actbio.2020.06.024



DOI: https://doi.org/10.22146/majkedgiind.93519

Article Metrics

Abstract views : 788 | views : 363

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2024 Majalah Kedokteran Gigi Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

 View My Stats


real time web analytics