Pengaruh volumetrik e-glass fiber terhadap kekuatan transversal reparasi plat gigi tiruan resin akrilik

https://doi.org/10.22146/majkedgiind.10734

Pramudya Aditama(1*), Erwan Sugiatno(2), Muhamad Rifqi Tri Nuryanto(3)

(1) Departemen Prostodonsia, Fakultas Kedokteran Gigi, Universitas Gadjah Mada, Daerah Istimewa Yogyakarta, Indonesia
(2) Departemen Prostodonsia, Fakultas Kedokteran Gigi, Universitas Gadjah Mada, Daerah Istimewa Yogyakarta, Indonesia
(3) Program Profesi Dokter Gigi, Fakultas Kedokteran Gigi, Universitas Gadjah Mada, Yogyakarta, Indonesia
(*) Corresponding Author

Abstract


The effect of e-glass fiber volumetric on transverse strength of an acrylic resin denture plate repair. Acrylic resin is the most commonly material for the denture base. A disadvantage of acrylic resin is that it is easily to be cracked. One of the ways to resolve this problem is by adding the E-glass fibers. The purpose of this research was to find out the effect of volumetric E-glass fiber on transverse strength of an acrylic resin denture plate repair. The experiment involved thirty plates of heat cured acrylic with the dimensions of 65 × 10 × 2.5 mm. The specimens were prepared to create a 3-mm gap and 45° bevel. Subjects were divided in to 3 groups, each of which contained 10. Group I (control) was with no fiber reinforcement, group II was reinforced with 3.7vol % E-glass fiber, and group III was reinforced with 7.4 volume % E-glass fiber. All plates were soaked in distillation water for one day at 37 °C. Plates were tested for transverse strength with Universal Testing Machine and all data obtained was analyzed with one way anova at 95% confidence level (α= 0.05). The significant difference was found between the transversal force of acrylic resin plat enforced with fiber and other group without being reinforced with fibers (p<0.05). Group reinforced with 7.4 vol % E-glass fibers showed a significant difference (higher) than the group reinforced with 3.7 volume % fibers. The addition of E-glass fibers in an acrylic resin plate repair material increased the transverse strength. The increase in volumetric fibers might improve the transverse strength of an acrylic resin plate repair material.


ABSTRAK

Resin akrilik merupakan bahan yang sering digunakan dalam pembuatan basis gigi tiruan. Kekurangan dari bahan resin akrilik adalah mudah patah. Salah satu cara yang dapat digunakan untuk mengatasi masalah tersebut adalah dengan menambahkan E-glass fiber. Tujuan untuk mengetahui pengaruh volumetrik E-glass fiber terhadap kekuatan transversal reparasi plat gigi tiruan resin akrilik. Penelitian ini menggunakan tiga puluh plat resin akrilik kuring panas dengan ukuran 65 × 10 × 2,5 mm. Spesimen dipreparasi untuk membentuk jarak 3 mm dan sudut bevel 45°. Subjek kemudian dibagi menjadi 3 kelompok, setiap kelompok terdiri dari 10 plat. Kelompok I (kontrol) tanpa diberikan penguat fiber, kelompok II diperkuat dengan 3,7 vol % E-glass  ber, dan kelompok III diperkuat dengan 7,4 vol % E-glass fiber. Seluruh plat kemudian direndam dalam air destilasi selama satu hari pada suhu 37 °C. Plat resin akrilik kemudian diuji menggunakan Universal Testing Machine untuk mengetahui kekuatan transversal dan data yang didapatkan dianalisis menggunakan Anova satu jalur dengan tingkat kepercayaan 95% (α=0,05). Hasil menunjukkan terdapat perbedaan signifikan antara kekuatan transversal plat resin akrilik yang diperkuat dengan fiber dengan kelompok tanpa diperkuat fiber (p < 0,05). Kelompok yang diperkuat dengan 7,4 vol % E-glass fiber menunjukkan perbedaan signi kan (lebih tinggi) dibandingkan kelompok yang diperkuat dengan 3,7 vol % fiber. Kesimpulan bahwa peningkatan volume dari E-glass fiber dapat meningkatkan kekuatan transversal reparasi plat gigi tiruan resin akrilik.



Keywords


e-glass fiber; transverse strength; acrylic denture repair; volumetric fiber

Full Text:

PDF


References

Combe EC. Sari dental material (terj.). Jakarta: Balai Pustaka; 1992. 27 – 32. 2. Gunadi HA, Margo A, Burhan LK, Suryatenggara F, Setiabudi L. Buku ajar ilmu geligi tiruan sebagian lepasan. Jilid 1 Cetakan II. Jakarta: Penerbit Hipokrates; 1995. 197 – 202. 3. Freilich MA, Meiers JC, Duncan, Goldberg AJ. Fiber reinforced composite in clinical dentistry. Chicago: Quintessence Publishing; 2007. 9 – 14, 98 – 99. 4. Uzun G, Keyf F. The effect of woven, chopped and longitudinal glass fibers reinforced on the transverse strength of a repair resin. J Of Biomat App. 2001; 15: 351 – 257. 5. Colvenkar SS, Aras MA. In vitro evaluation of transverse strength of repair heat cured denture base resins with and without surface chemical treatment. J Indian Prosthet Dent. 2008; 8(2): 87 – 93. 6. Jubhari EH. Penggunaan jaring penguat sambungan untuk memperbaiki kekuatan hasil reparasi lempeng akrilik. 2003. Diakses dari http://www.pdgi-online.com. Diunduh 14 September 2013. 7. Freilich MA, Meiers JC, Duncan, Goldberg AJ.Fiber reinforced composite in clinical dentistry. Illionis: Quintessence Publishing Co; 2000. 10, 73 – 76. 8. Le Bell-Rönnlöf, Anna-Maria. Fiber reinforced composites as root canal posts. Turku Finland: 2007. 95 – 101. 9. Ballo AM. Fiber reinforced composite as oral implant material. Turku Finland: Painosalama Oy; 2008. 27. 10. Febriani M. Pengaruh penambahan serat pada basis gigi tiruan resin akrilik. Jurnal Ilmiah dan Teknologi Kedokteran Gigi. FKG UPDM (B). 2003; 129 – 132. 11. Narva KK, Lassila LVJ, Vallittu PK. The static strength and modulus of fiber reinforced denture base polymer. J Dent Mat. 2005; 21: 421 – 428. 12. Lindawati MS, Rahardjo WT, Himawan SL, Soelistijani P. Pengaruh pemakaian desinfektan terhadap transverse strength resin akrilik yang pengerasannya dengan pemanasan. Jurnal Kedokteran Gigi Indonesia. 1997; (4): 169 – 174. 13. Unalan I, Dikbas, O Gurbuz. Transverse strength of poly-methylmethacrylate reinforced with different forms and concentrations of e-glass fibres. OHDMBSC. 2010; 9(3): 144 – 147. 14. Anusavice KJ. Buku ajar ilmu bahan kedokteran gigi (terj.). 10th ed. Jakarta: EGC; 2004. 98 – 99. 15. American Dental Association. Dentist’s desk reference: materials, instruments and equipment. 2nd ed. Chicago; 1983. 125. 16. Power JM, Sakaguchi RL. Craig’s restorative dental materials. 12th ed. St. Louis: Elsevier; 2006. 524. 17. Vojvodic D, Komar D, Schauperl Z, Celebic A, Mehulic K, Zabarovic D. Influence of different glass fiber reinforcements on denture base polymer strength (fiber reinforcements of dental polymer). Med Glas. 2009; 6(2): 227 – 234. 18. Yusof A. 2001. Mekanika bahan dan struktur. Johor: Universitas Teknologi Malaysia; 2001. 31. 19. Ellakawa AE, Shortall AC, Marquis PM. Influence of different techniques of laboratory construction on the fracture resistance of fiber reinforced composite bridges. J Contemp Dent Prac. 2004; (5)4: 1 – 13. 20. Alander P, Lassila LV, Vallittu PK. The span length and cross-sectional design affect values of strength. Dent Mater. 2005; 21: 347 – 353. 21. Yu SH, Yon L, Seunghan OH, Hye WCHO, Yutaka ODA, Ji MBAE. Reinforcing effects of different fibers on denture base resin based on the fiber type, concentration, and combination. Dental Materials Journal. 2012; 31(6): 1039 – 1046. 22. Houston TE. Bite Force and Bite Pressure: Comparasion of Human and Dogs. 2003. Diakses dari http://www.glapbta.com/BFBP.pdf. Diunduh 1 November 2014



DOI: https://doi.org/10.22146/majkedgiind.10734

Article Metrics

Abstract views : 4378 | views : 6207

Refbacks

  • There are currently no refbacks.




Copyright (c) 2017 Majalah Kedokteran Gigi Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.


 

 View My Stats


real
time web analytics