Analisis Efektivitas Mesin pada Divisi Pengalengan Jamur Di PT XYZ Menggunakan Metode Overall Equipment Effectiveness

https://doi.org/10.22146/jntt.56619

Aditya Haradito(1*), Iman Sabarisman(2), Satria Bhirawa Anoraga(3)

(1) Sekolah Vokasi, Universitas Gadjah Mada
(2) Sekolah Vokasi, Universitas Gadjah Mada
(3) Sekolah Vokasi, Universitas Gadjah Mada
(*) Corresponding Author

Abstract


PT XYZ is one of the food canning companies in Indonesia. Nowadays, many companies are looking up for the alternatives to increase the company revenue by making a continous improvement in every process. This study has three aims to be achieved. First, knowing the value of availability rate, performance rate, and quality rate. Second, to determine the major cause which affecting the effectiveness value of the production machine. Third, to obtain the alternatives improvement to increase the machine effectivity. Overall Equipment Effectiveness (OEE) is a method to determine the effectiveness level of equipment utilization. The OEE method is known as one of the program applications of Total Productive Maintenance (TPM). This study measures the value of OEE in the production line of mushroom canning within two months. The values of this study are, availability rate is 89.99%, performance rate is 65.13%, and quality rate is 99.76%. From those data, the obtained calculation value of OEE is 58.71%, it shows that it has not reach yet the best practice (85%) and need an improvement. The Losses in PT XYZ are breakdown losses, setup and adjustment losses, idle and minor stoppage losses, and defect losses. The alternatives improvement are tightening the maintenance schedule, as well as inspection before and after use on the machine. This maintenance is supported by a focus on the TPM pillar of self-improvement, which changes the workers’ mindset, to change the mindset of the workers there should be an education and training to improve the ability of workers.

Keywords


Overall Equipment Effectiveness (OEE)

Full Text:

PDF


References

Astuti, Rahmaniyah Dwi dan Irwan Iftadi. (2016). Analisis Dan Perancangan Sistem Kerja. Yogyakarta: Deepublish.

Bakhtiar, S, Suharto Tahir dan Ria Asysyfa Hasni. (2013). Analisa Pengendalian Kualitas Dengan Menggunakan Metode Statistical Quality Control (SQC) (Studi kasus: pada UD. Mestika Tapaktuan). Malikussaleh Industrial Engineering Journal 2 (1).

Perdana, Yulian Galih. (2017). Analisis Peningkatan Efektivitas Mesin Pengolahan Teh Terhadap Manajemen Perawatan Dengan Metode Total Productive Maintenance (TPM) Pada PT Pagilaran. Jurusan Diploma III Agroindustri, Univeritas Gadjah Mada.

Rahmadhani, Delia Fitri., Harsono Taroepratjeka dan Lisye Fitria. (2014). Usulan Peningkatan Efektivitas Mesin Cetak Manual Menggunakan Metode Overall Equipment Effectiveness (OEE) (Studi Kasus Di Perusahaan Kerupuk TTN). Jurnal Online Institut Teknologi Nasional 2 (4).

Roberts, Lon. (2005). SPC for Right-BrainThinkers. USA: Quality Press.

Triwardani, Dinda Hesti, Arif Rahman, Ceria Farela Mada Tantrika. (2013). Analisis Overall Equipment Effectiveness (OEE) Dalam Meminimalisi Six Big Losses Pada Mesin Produksi Dual Filters Dd07 (Studi Kasus : Pt. Filtrona Indonesia, Surabaya, Jawa Timur). Jurusan Teknik Industri, Universitas Brawijaya.

Wahyuni, Mawaddatul Fitri. (2015). Analisis Nilai Overall Equipment Effectiveness (OEE) Sebagai Dasar Untuk Perbaikan Efektivitas Kerja Mesin Cut Off Di Plant X PT ABC. Jurnal Ilmiah Universitas Bakrie 3 (2).



DOI: https://doi.org/10.22146/jntt.56619

Article Metrics

Abstract views : 5773 | views : 3807

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Jurnal Nasional Teknologi Terapan (JNTT)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Nasional Teknologi Terapan Indexed by:


  

Web
AnalyticsView My Stats