Karakteristik Aliran Turbin Hidrokinetik Savonius Susunan Inward dan Outward Overlap dengan Dua Semicircular Blade-Flat Leading Edge

https://doi.org/10.22146/jmdt.74371

Khoiri Rozi(1*), Berkah Fajar Tamtomo Kiono(2), Ismoyo Haryanto(3), Adam Rahmansyah(4)

(1) Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
(2) Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
(3) Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
(4) Departemen Teknik Mesin, Fakultas Teknik, Universitas Diponegoro
(*) Corresponding Author

Abstract


Penelitian ini dibuat untuk mempelajari medan aliran melalui turbin hidrokinetik Savonius dengan flat-leading edge. Pengaruh ketebalan blade, overlap, dan kecepatan freestream disimulasikan menggunakan ANSYS FLUENT dengan model k-w SST. Hasil penelitian menunjukkan bahwa struktur aliran berubah seiring dengan meningkatnya putaran turbin dengan kompleksitas aliran terbentuk pada sudut putar yang lebih besar. Posisi inward dan outward overlap menciptakan pola aliran lebih kompleks. Koefisien torsi dan daya untuk blade tipis lebih tinggi daripada blade yang lebih tebal dan nilainya meningkat dengan peningkatan kecepatan aliran bebas.


Keywords


overlap, power coefficient, torque coefficient, Savonius hydrokinetic turbine.

Full Text:

PDF


References

Akwa, J. V., Alves, G., and Petry, A. P., “Discussion on the verification of the overlap ratio influence on performance coefficients of a Savonius wind rotor using computational fluid dynamics”, Renewable Energy, 38(1) 141–149, 2012.

Alom, N., and Saha, U. K., “Influence of blade profiles on Savonius rotor performance: Numerical simulation and experimental validation”, 186, 267–277, 2019.

Ashwindaran, S. N., Azizuddin, A. A., Oumer, A. N., “Study of √2 conjecture in the construction of drag induced wind turbine blade morphology”, Evergreen, 8(3), 574–585, 2021.

Eshagh, M., Fatahian, H., and Fatahian, E., “Performance improvement of a Savonius vertical axis wind turbine using a porous deflector”, Energy Conversion and Management, 220, 2020.

Frikha, S., Driss, Z., Ayadi, E., Masmoudi, Z., and Abid, M. S., “Numerical and experimental characterization of multi-stage Savonius rotors”, Energy, 114, 382–404, 2016.

Guo, F., Song, B., Mao, Z., Tian, W., “Experimental and numerical validation of the influence on Savonius turbine caused by rear deflector”, Energy, 196, 2020.

Hassan, H. A., Nagib E, A. M., and Kassab, S. Z., “Numerical study of improving Savonius turbine power coefficient by various blade shapes”, Alexandria Engineering Journal, 58(2), 429–441, 2019.

Kerikous, E., and Thevenin, D., “Optimal shape of thick blades for a hydraulic Savonius turbine”, Renewable Energy, 134, 629–638. 2019.

Kumar, A., Saini, R. P., Saini, G., and Dwivedi, G., “Effect of number of stages on the performance characteristics of modified Savonius hydrokinetic turbine”, Ocean Engineering, 217, 2020.

Layeghmand, K., Ghiasi Tabari, N., and Zarkesh, M., “Improving efficiency of Savonius wind turbine by means of an airfoil-shaped deflector”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 1–12. 2020.

Mahmoud, N. H., El-Haroun, A. A., Wahba, E., Nasef, M. H., “An experimental study on improvement of Savonius rotor performance”, Alexandria Engineering Journal, 51(1), 19–25. 2012.

Mahrous, A. F., “Computational fluid dynamics study of a modified Savonius rotor blade by universal consideration of blade shape factor concept”, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85(1), 22–39. 2021.

Menter, F. R., “Two-equation eddy-viscosity turbulence models for engineering applications”, AIAA Journal, Vol. 32, No. 8, pp. 1598–1605, 1994.

Meri, S., Absi, A., Hasan, A., Oudah, S., Al-Rawi, B. A., Thajeel, S., Attabi, A.,”An experimental test of the performance enhancement of a Savonius turbine by modifying the inner surface of a blade”, Materials Today: Proceedings, 42, 2233–2240. 2021.

Nasef, M. H., El-Askary, W. A., Abdel-Hamid, A. A., Gad, H. E., “Evaluation of Savonius rotor performance: Static and dynamic studies”, Journal of Wind Engineering and Industrial Aerodynamics, 123, 1–11. 2013.

Saad, A. S., Elwardany, A., El-Sharkawy, I. I., Ookawara, S., and Ahmed, M., “Performance evaluation of a novel vertical axis wind turbine using twisted blades in multi-stage Savonius rotors”, Energy Conversion and Management, 235, 2021.

Saha, U. K., Thotla, S., and Maity, D., “Optimum design configuration of Savonius rotor through wind tunnel experiments’, Journal of Wind Engineering 96, 1359–1375. 2008.

Sampath, S. S., Shetty, S., and Chithirai Pon Selvan, M., “Estimation of power in low velocity vertical axis wind turbine. Frontiers of Mechanical Engineering”, 10(2), 211–218. 2015.

Shaheen, M., El-Sayed, M., and Abdallah, S., “Numerical study of two-bucket Savonius wind turbine cluster”, Journal of Wind Engineering and Industrial Aerodynamics, 137, 78–89. 2015.

Sharma, K. K., Gupta, R., and Biswas, A., “Performance measurement of a two-stage two-bladed savonius rotor”, International Journal of Renewable Energy Research, 4(1), 115–121. 2014.

Shashikumar, C. M., Vijaykumar, H., Vasudeva, M., “Numerical investigation of conventional and tapered Savonius hydrokinetic turbines for low-velocity hydropower application in an irrigation channel”, Sustainable Energy Technologies and Assessments, 43, 2021.

Talukdar, P. K., Sardar, A., Kulkarni, V., Saha, U. K., “Parametric analysis of model Savonius hydrokinetic turbines through experimental and computational investigations”, Energy Convers Manag.158, 36–49, 2018.

Tian, W., Song, B., Vanzwieten, J. H., and Pyakurel, P., “Computational fluid dynamics prediction of a modified Savonius wind turbine with novel blade shapes”, Energies.8(8),7915–29, 2015.



DOI: https://doi.org/10.22146/jmdt.74371

Article Metrics

Abstract views : 779 | views : 388

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.