The Effects of Water to Solid Ratio, Activator to Binder Ratio, and Lime Proportion on the Compressive Strength of Ambient-Cured Geopolymer Concrete
Andi Arham Adam(1*)
(1) Universitas Tadulako
(*) Corresponding Author
Abstract
Keywords
Full Text:
PDFReferences
Adam, A. A. et al. (2016) ‘The Effect of Lime Addition on the Setting Time and Strength of Ambient Cured Fly Ash Based Geopolymer Binder’, in MATEC Web of Conferences. EDP Sciences, p. 1015.
Adam, A. A. and Horianto (2014) ‘The effect of temperature and duration of curing on the strength of fly ash based geopolymer mortar’, in Procedia Engineering. doi: 10.1016/j.proeng.2014.12.199.
Arioz, E., Arioz, O. and Kockar, O. M. (2012) ‘An Experimental Study on the Mechanical and Microstructural Properties of Geopolymers’, Procedia Engineering. Elsevier, 42(0), pp. 100–105. doi: 10.1016/J.PROENG.2012.07.399.
Al Bakri Abdullah, M. M. et al. (2012) ‘Correlation between Na2SiO3/NaOH ratio and fly ash/alkaline activator ratio to the strength of geopolymer’, in Advanced Materials Research. Trans Tech Publ, pp. 189–193.
Davidovits, J. (1976) ‘Solid-Phase Synthesis of a Mineral Blockpolymer by Low Temperature Polycondensation of Alumino-Silicate Polymers: Na-poly(sialate) or Na-PS and Characteristics’, in IUPAC Symposium on Long-Term Properties of Polymers and Polymeric Materials, Stockholm 1976, Topic III. Stockholm.
Davidovits, J. (1994) ‘Properties of geopolymer cements’, in First international conference on alkaline cements and concretes. Scientific Research Institute on Binders and Materials Kiev, Ukraine, pp. 131–149.
Dombrowski, K., Buchwald, A. and Weil, M. (2007) ‘The influence of calcium content on the structure and thermal performance of fly ash based geopolymers’, Journal of Materials Science. Springer, 42(9), pp. 3033–3043.
Guo, X., Shi, H. and Dick, W. A. (2010) ‘Compressive strength and microstructural characteristics of class C fly ash geopolymer’, Cement and Concrete Composites. Elsevier, 32(2), pp. 142–147.
Hardjito, D. et al. (2004) ‘On the development of fly ash-based geopolymer concrete’, Materials Journal, 101(6), pp. 467–472.
Jaya, N. A. et al. (2018) ‘Effect of Sodium Hydroxide Molarity on Physical, Mechanical and Thermal Conductivity of Metakaolin Geopolymers’, in IOP Conference Series: Materials Science and Engineering. IOP Publishing, p. 12015.
Khale, D. and Chaudhary, R. (2007) ‘Mechanism of geopolymerization and factors influencing its development: a review’, Journal of materials science. Springer, 42(3), pp. 729–746.
Khan, M. Z. N., Hao, Y. and Hao, H. (2016) ‘Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash’, Construction and Building Materials. Elsevier, 125, pp. 809–820.
Khater, H. M. (2011) ‘Effect of calcium on geopolymerization of aluminosilicate wastes’, Journal of Materials in Civil Engineering. American Society of Civil Engineers, 24(1), pp. 92–101.
Law, D. W. et al. (2012) ‘Durability assessment of alkali activated slag (AAS) concrete’, Materials and Structures. Springer, 45(9), pp. 1425–1437.
Law, D. W. et al. (2015) ‘Long term durability properties of class F fly ash geopolymer concrete’, Materials and Structures. Springer, 48(3), pp. 721–731.
Lee, W. K. W. and Van Deventer, J. S. J. (2002) ‘The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements’, Cement and Concrete Research. Elsevier, 32(4), pp. 577–584.
Liyana, J. et al. (2014) ‘Effect of fly ash/alkaline activator ratio and sodium silicate/NaOH ratio on fly ash geopolymer coating strength’, in Key Engineering Materials. Trans Tech Publ, pp. 146–150.
Neville, A. M. (2011) Properties of Concrete, Journal of General Microbiology. doi: 10.4135/9781412975704.n88.
Siyal, A. A. et al. (2016) ‘Effects of parameters on the setting time of fly ash based geopolymers using Taguchi method’, Procedia engineering. Elsevier, 148, pp. 302–307.
Temuujin, J., van Riessen, A. and Williams, R. (2009) ‘Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes’, Journal of Hazardous Materials, 167(1–3), pp. 82–88. doi: http://dx.doi.org/10.1016/j.jhazmat.2008.12.121.
Temuujin, J. v, Van Riessen, A. and Williams, R. (2009) ‘Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes’, Journal of hazardous materials. Elsevier, 167(1–3), pp. 82–88.
Wardhono, A., Law, D. W. and Strano, A. (2015) ‘The strength of alkali-activated slag/fly ash mortar blends at ambient temperature’, Procedia Engineering. Elsevier, 125, pp. 650–656.
Yip, C. K. et al. (2008) ‘Effect of calcium silicate sources on geopolymerisation’, Cement and Concrete Research. Elsevier, 38(4), pp. 554–564.
DOI: https://doi.org/10.22146/jcef.43878
Article Metrics
Abstract views : 4136 | views : 3741Refbacks
- There are currently no refbacks.
Copyright (c) 2022 The Author(s)
The content of this website is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
ISSN 5249-5925 (online) | ISSN 2581-1037 (print)
Jl. Grafika No.2 Kampus UGM, Yogyakarta 55281
Email : jcef.ft@ugm.ac.id
JCEF Stats