* Corresponding Author
Retrofitting on Flexural Strength of RC Columns Using Polyester Resin Concrete
https://doi.org/10.22146/jcef.24305 Dahlia Patah(1*), Ashar Saputra(2), Andreas Triwiyono(3)
(1) West Sulawesi University
(2) Department of Civil and Environmental Engineering, Universitas Gadjah Mada
(3) Department of Civil and Environmental Engineering, Universitas Gadjah Mada
(*) Corresponding Author
Abstract
Concrete column structures damages due to flexural moment need to be repaired and strengthened to avoid of sudden failure by applying appropriate methods. The method applied in this study was retrofitting by applying polyester resin concrete. In order to know the effect of polyester resin concrete against axial load capacity, stiffness, ductility and the damage pattern of columns by eccentrically loaded, an experimental laboratory was carried out. In this study, three column specimens are tested. The dimension of the specimen is 150 mm x 150 mm and the high of the column are 1200 mm with the effective high is 600 mm and 600 mm for corbel. The column specimens have a fixed eccentricity of 50 mm. First, initial column tested before yield point of reinforcing bar reached and concrete crack limited to 0,4mm. Further, retrofitting applied to each initial column specimen using normal concrete and polyester resin concrete with the level of resin 15% and 20%, respectively. Retrofitting column tested again with the same loading of initial column until it reaches the collapse load. The result of experiment compares to analysis method by Nawy and Whitney which represent the analysis of normal concrete column capacity. The result showed that levels of resin to be used is 20% because of better workability compared to 15% resin. Further, compressive test on resin concrete cylinder showed that the resin level at 15% and 20% are 82.82 MPa and 76.65 MPa, respectively. The strength of KR-ii decreased about 33.523%. The strength of KR-15ii and KR-20ii increased 5.08% and 24.827% respectively compared to initial column. Specimen column stiffness KR-ii. KR-15ii and KR-20ii decreased about 76.22%, 24.50% and 37.65%, respectively from the initial column. Furthermore, ductility of KR-ii, KR-15ii and KR-20ii decreased about 1.512, 1.250 and 2.50, respectively. The changes of the ultimate capacity load of KR-ii, KR-15ii and KR-20ii by Nawy Method respectively -26.54%, 12.66%, and 13.83%, whereas the method of Whitney respectively -17.68%, 26.25%, and 27.56%. The use of polyester resin concrete can change the pattern of collapse from brittle to ductile columns.
Keywords: retrofit, ductility, stiffness, flexural column, eccentricity
Keywords
Full Text:
PDFReferences
Adityo, R. S. (2008). Pengaruh Penggunaan Wiremesh dalam Perbaikan Kolom Pendek Penampang Persegi Akibat Beban Eksentris 0,75h [Effect of Wiremesh Application on the Repairment of Short Rectangular Column due to Eccentric Load 0.75 h]. Thesis, Universitas Gadjah Mada, Yogyakarta.
Bărbuţă, M., & Harja, M. (2008). Experimental Study on The Characteristics of Polymer Concrete with Epoxy Resin. Buletinul Institutului Politehnic Din IASI.
Gere, & Timoshenko. (1984). Theory of Elastic Stability (International Student Edition ed.). Tokyo, Japan: McGreaw-Hill Kogahusa.
Jamshidi, M., & Pourkhorshidi, A. R. (2011). Modified Polyester Resins as an Effective Binder for Polymer Concretes. Journal of Materials and Structures(45), 521-527.
Kaminski, M., & Trapko, T. (2005). Experimental Behaviour of Reinforced Concrete Column Models Strengthened by CFRP Materials. Journal of Civil Engineering and Management, XII(2), 109-115.
Lee, E. H. (2007). Application of Polymer in Concrete Construction. Universiti Teknologi Malaysia, Malaysia.
Nawy, E. G. (2010). Beton Bertulang Suatu Pendekatan [An Approach of Reinforced Concrete]. Institut Teknologi Sepuluh Nopember. Bandung: Rifka Aditama.
Nugroho. (2002). Kuat Batas Lentur Kolom Beton Bertulang Segi Empat dengan Perkuatan CPRF Wrap [Ultimate Bending Strength of Rectangular Column with Reinforcement of CPRF Wrap]. Thesis, Universitas Gadjah Mada, Yogyakarta.
Park, P., & Pauly, T. (1974). Reinforced Concrete Structure. New York, London, Sidney, Toronto: A Wiley-Interscience Publication.
Patah, D. (2013). Perbaikan Dan Perkuatan Lentur Kolom Dengan Beton Resin Poliester (polyester Resin Concrete) [Repairment and Bending Reinforcement of Column with Polyester Resin Concrete]. Yogyakarta: Universitas Gadjah Mada.
Prakoso, G. (2010). Perkuatan dan Daktalitas Kolom Praktis Diperkuat dengan Profil Siku Berlubang pada Beban Eksentris [Reinforcement and Ductility of Practical Column Reinforced by L Hollow Profile on Eccentric Load]. Thesis, Universitas Gadjah Mada, Yogyakarta.
Putra, K. A. (2013). Sifat Fisik dan Mekanik Beton Polimer dengan Variasi Resin 5%, 10%, 15%, 20% dan 25% [Physical and Mechanical Characteristics of Polymer Concrete with 5%, 10%, 15%, 20% and 25% Resin]. Universitas Gadjah Mada, Yogyakarta.
Sadeghian, P., Rahai, A. R., & Ehsani, M. R. (2010). Experimental Study of Rectangular RC Columns Strengthened with CFRP Composites Under Eccentric Loading. Journal of Composites for Construction, XIV(4), 443-450.
Syukroni, A. (2013). Sifat Fisik dan Mekanik Mortar Polimer dengan Variasi Resin 5%, 10%, 15%, 20%, dan 25% [Physical and Mechanical Characteristics of Polymer Mortar with 5%, 10%, 15%, 20% and 25% Resin]. Universitas Gadjah Mada, Yogyakarta.
DOI: https://doi.org/10.22146/jcef.24305
Article Metrics
Abstract views : 1682
| 
views : 1813
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 The Author(s)
The content of this website is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
ISSN 5249-5925 (online) | ISSN 2581-1037 (print)
Jl. Grafika No.2 Kampus UGM, Yogyakarta 55281
Email : jcef.ft@ugm.ac.id JCEF Stats