Sistem Kendali PID pada Modus Transisi Terbang Tiltrotor
Syafrizal Akhzan(1*), Andi Dharmawan(2)
(1) 
(2) Department of Computer Science and Electronics, Universitas Gadjah Mada
(*) Corresponding Author
Abstract
PID controller uses negative feedback which is obtained from accelerometer, gyroscope, and magnetometer by using DMP method and Madgwick quaternion to produce the pulse to control the velocity of brushless motor and angle position of servo motor. The result of PID controller is also compared to P controller and PI controller.
According to the test, control system in transition mode for roll angle with setpoint 0o is capable to maintain roll angle at average angle 0.48o with standard deviation 1.75o, for pitch angle with setpoint 25o is capable to maintain pitch angle at average angle 25.26o with standard deviation 2.87o, for yaw angle is capable to maintain yaw angle at range 10o to 0o with average angle 3.78o and standard deviation 1.83o.
Keywords
Full Text:
PDFReferences
[1] Ogata, K., 2010, Modern Conrol Engineering Fifth Edition, Prentice Hall, New Jersey.
[2] Copeland, B.R., 2008, The Design of PID Controllers Using Ziegler Nichols Tuning. New York.
[3] Gress, G.R., 2007, Lift fans as Gyroscopes for Controlling Compact VTOL Air Vehicles: Overview and Development Status of Oblique Active Tilting. Gress Aerospace, Toronto, Canada.
[4] Kardono, Effendi, R.A.K., Fatoni, A., 2012, Perancangan dan Implementasi Sistem Pengaturan Optimal LQR untuk Menjaga Kestabilan Hover pada Quadcopte, Jurnal Teknik ITS Vol.1.
DOI: https://doi.org/10.22146/ijeis.7643
Article Metrics
Abstract views : 2093 | views : 2044Refbacks
- There are currently no refbacks.
Copyright (c) 2015 IJEIS - Indonesian Journal of Electronics and Instrumentation Systems
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
View My Stats1