* Corresponding Author
Hide
Show all
Analisis Hubungan Kecepatan Gelombang Dengan Kuat Tekan Beton Menggunakan Metode UPV
https://doi.org/10.22146/ijeis.33414 Anggia Eta Rizkiasari(1), Abdul Rouf(2*)
(1) Program Studi Elektronika dan Instrumentasi, FMIPA UGM, Yogyakarta
(2) Departemen Ilmu Komputer dan Elektronika, FMIPA UGM, Yogyakarta
(*) Corresponding Author
Abstract
Until now the use of concrete as a building material is still widely used for building structures. It is important to do concrete compressive strength testing as one of the factors to know the quality of a concrete. NDT (Non-Destructive Testing) is a method of solid quality testing without damaging the object. Testing with the NDT method is considered more efficient than the destructive test method. One method for performing NDT testing is by utilizing UPV (Ultrasonic Pulse Velocity).
UPV is a method for estimating concrete compressive strength based on the ultrasonic pulse velocity relationship through concrete with the concrete compressive strength itself. UPV testing works by emitting ultrasonic pulses of 40 kHz through concrete to obtain the travel time of the pulse. Then the resulting time will be calculated the value of its speed and then will be converted into concrete compressive strength.
Concrete compressive strength measurement system for high-quality concrete using UPV method can be designed by utilizing relation between ultrasonic pulse velocity with concrete compressive strength. Based on the test results, the average error value of concrete compressive strength testing is 3.04% with a maximum error of 6.63%.
Keywords
Full Text:
PDFReferences
[1] T. N. S. Sidiq, A. Rouf, and T. W. Supardi, “Sistem Deteksi Bentuk Kecacatan Benda Padat Menggunakan Teknik Variasi Sudut Ultrasonik,” IJEIS (Indonesian Journal of Electronics and Instrumentations Systems, vol. 6, no. 1, pp. 69–80, Apr. 2016 [Online]. Available: https://jurnal.ugm.ac.id/ijeis/article/view/10773. [Accessed: 17-Feb-2018]
[2] H. S. Anggraeni, E. E. Susilo, and S. Wedhanto, “Perbandingan Kekuatan Beton Berdasarkan Hasil Ultrasonik Tes UPV,” Konferensi Nasional Teknik Sipil 7 (KoNTekS 7), Oct. 2013 [Online]. Available: http://sipil.ft.uns.ac.id/konteks7/prosiding/020M.pdf. [Accessed: 12-Nov-2016]
[3] M. Hamidian, A. Shariati, M. M. A. Khanouki, H. Sinaei, A. Toghroli, and K. Nouri, “Application of Schmidt Rebound Hammer and Ultrasonic Pulse Velocity Techniques for Structural Health Monitoring,” SRE (Scientific Research and Essays), vol. 7(21), pp 1997–2001, Jun. 2012 [Online]. Available: http://www.academicjournals.org/SRE. [Accessed: 17-Nov-2016]
[4] I. D. Pratomo, A. Rouf, and T. W. Supardi, “Pengukur Jarak Lubang Pada Benda Padat Menggunakan Sensor Ultrasonik,” IJEIS (Indonesian Journal of Electronics and Instrumentations Systems, vol. 6, no. 1, pp. 81–92, Apr. 2016 [Online]. Available: https://jurnal.ugm.ac.id/ijeis/article/view/10774. [Accessed: 17-Feb-2018]
[5] S. H. Kee and J. Zhu, “Using Piezoelectric Sensors for Ultrasonic Pulse Velocity Measurements in Concrete,” Smart Materials and Structures, vol. 22, no. 11, pp. 11, Oct. 2013 [Online]. Available: http://iopscience.iop.org/article/10.1088/0964-1726/22/11/
115016/meta. [Accessed: 17-Oct-2017]
[6] P. Acevedo, M. Vazquez, J. Duran, and R. Petrearce, “A Pulse Generator based on an Arduino Platform for Ultrasonic Applications,” 2015 Internastional Congress on Ultrasonic, vol. 70, pp. 1096 – 1099, Dec. 2015 [Online]. Available: https://www.sciencedirect.com/science/article/pii/S187538921500975X. [Accessed: 19-Feb-2018]
[7] S. Swasoko and A. Rouf, “Rancangan Bangun Pembangkit Pulsa Tiga Sensor Ultrasonik untuk Pendeteksi Kecacatan Beton Berbasis Mikrokontroler,” IJEIS (Indonesian Journal of Electronics and Instrumentations Systems, vol. 7, no. 2, pp. 197–208, Oct. 2017 [Online]. Available: https://jurnal.ugm.ac.id/ijeis/article/view/24276/17908. [Accessed: 16-Feb-2018]
[8] B. S. Al-Nu’man, B. R. Aziz, S. A. Abdulla, and S. E. Khaleel, “Compressive Strength Formula for Concrete Using Ultrasonic Pulse Velocity,” IJETT (International Journal of Engineering Trends and Technology), vol. 26, no. 1, pp. 9–13, Aug. 2015 [Online]. Available: http://ijettjournal.org/2015/volume-26/number-1/IJETT-V26P203.pdf. [Accessed: 17-Oct-2017]
[9] B. S. Al-Nu’man, B. R. Aziz, S. A. Abdulla, and S. E. Khaleel, “Effect of Aggregate Content on the Concrete Compressive Strength – Ultrasonic Pulse Velocity Relationship,” American Journal of Civil Engineering and Architecture, vol. 4, no. 1, pp. 1–5, 2016 [Online]. Available: http://pubs.sciepub.com/ajcea/4/1/1. [Accessed: 12-Nov-2016]
[10] V. Meacci, S. Ricci, A. Bruehwiler, and D. Lootens, “Compact Ultrasound Board for Measurement of Concrete Compressive Strength,” 2016 IEEE International Ultrasonics Symposium (IUS), Nov. 2016 [Online]. Available: http://ieeexplore.ieee.org/document/
7728586/. [Accessed: 12-Nov DOI: https://doi.org/10.22146/ijeis.33414
Article Metrics
Abstract views : 2349
| 
views : 5322
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 IJEIS (Indonesian Journal of Electronics and Instrumentation Systems)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
View My Stats1