Determination of Chlorpromazine Using Molecular Imprinting Polymers in Different Sample Matrices

Eman Wajeh Ammen; Yehya Kamal Al-Bayati

doi:10.22146/ijc.94705

Determination of Chlorpromazine Using Molecular Imprinting Polymers in Different Sample Matrices

https://doi.org/10.22146/ijc.94705

Eman Wajeh Ammen⁽¹⁾, Yehya Kamal Al-Bayati^(2*)

(1) Department of Chemistry, College of Science, University of Baghdad, Baghdad 10071, Iraq; Scientific Research Commission, Ministry of Higher Education & Scientific Research,Baghdad 10070, Iraq
(2) Department of Chemistry, College of Science, University of Baghdad, Baghdad 10071, Iraq
(*) Corresponding Author

Abstract

Antipsychotic drugs, including chlorpromazine, are frequently used to treat mental illnesses. However, prolonged exposure to even small amounts of the substance can accumulate and cause a potential human health risk. Thus, the selective and sensitive detection of these drugs is crucial. Molecularly imprinted polymers (MIPs) are receptors that are designed to have a highly specific molecular recognition ability, which is the primary and crucial function of receptors. The synthesis of chlorpromazine-imprinted polymers involves the polymerization of functional monomers and cross-linkers in the presence of chlorpromazine as a template, followed by the removal of the template to create cavities with complementary binding sites. Various strategies, including bulk polymerization, free radical polymerization surface imprinting, and nanoimprinting, have been employed to fabricate chlorpromazine-molecular imprinted polymers with high affinity and selectivity. Characterization techniques such as UV-vis spectroscopy, Fourier-transform infrared spectroscopy, and scanning electron microscopy are commonly employed to confirm the successful imprinting of chlorpromazine. The high selectivity of MIP toward templates enables them to be used in various applications like solid-phase extraction and chemical sensors, among others. The aim of this review is to present and highlight the various methods used to determine chlorpromazine based on molecular imprinting polymers in different samples.

Keywords

chlorpromazine; molecular imprinting polymers; applications

Full Text:

Full Text PDF

References

[1] Purushothama, H.T., Arthoba Nayaka, Y., Manjunatha, P., Yathisha, R.O., Vinay, M.M., and Basavarajappa, K.V., 2019, Electrochemical determination of Chlorpromazine using l-Cysteine modified carbon paste electrode, Chem. Data Collect., 23, 100268.

[2] Kesavan, G., Gopi, P.K., Chen, S.M., and Vinothkumar, V., 2021, Iron vanadate nanoparticles supported on boron nitride nanocomposite: Electrochemical detection of antipsychotic drug chlorpromazine, J. Electroanal. Chem., 882, 114982.

[3] Lu, Z., Li, Y., Liu, T., Wang, G., Sun, M., Jiang, Y., He, H., Wang, Y., Zou, P., Wang, X., Zhao, Q., and Rao, H., 2020, A dual-template imprinted polymer electrochemical sensor based on AuNPs and nitrogen-doped graphene oxide quantum dots coated on NiS₂/biomass carbon for simultaneous determination of dopamine and chlorpromazine, Chem. Eng. J., 389, 124417.

[4] Hassouna, M.E.M., Adawi, A.M., and Ali, E.A., 2012, Extractive spectrophotometric determination of chlorpromazine and trifluoperazine hydrochloride in pharmaceutical preparations, Egypt. J. Forensic Sci., 2 (2), 62–68.

[5] Yamini, Y., and Faraji, M., 2014, Extraction and determination of trace amounts of chlorpromazine in biological fluids using magnetic solid phase extraction followed by HPLC, J. Pharm. Anal., 4 (4), 279–285.

[6] Dai, J., Lin, H., Pan, Y., Sun, Y., Wang, Y., Qiao, J., Lian, H., and Xu, C., 2023, Determination of chlorpromazine and its metabolites in animal-derived foods using QuEChERS-based extraction, EMR-Lipid cleanup, and UHPLC-Q-Orbitrap MS analysis, Food Chem., 403, 134298.

[7] Jaberi, S.Y.S., Ghaffarinejad, A., Kamalifar, M., and Heidari, M., 2020, Determination of chlorpromazine hydrochloride with a layered double hydroxide modified glassy carbon electrode as a nanocatalyst, Electroanalysis, 32 (9), 2065–2071.

[8] Kubendhiran, S., Sakthivel, R., Chen, S.M., Anbazhagan, R., and Tsai, H.C., 2019, A novel design and synthesis of ruthenium sulfide decorated activated graphite nanocomposite for the electrochemical determination of antipsychotic drug chlorpromazine, Composites, Part B, 168, 282–290.

[9] Palakollu, V.N., Karpoormath, R., Wang, L., Tang, J.N., and Liu, C., 2020, A versatile and ultrasensitive electrochemical sensing platform for detection of chlorpromazine based on nitrogen-doped carbon dots/cuprous oxide composite, Nanomaterials, 10 (8), 1513.

[10] Koventhan, C., Pandiyan, R., Chen, S.M., and Lo, A.Y., 2023, Nickel molybdate/cobalt molybdate nanoflakes by one-pot synthesis approach for electrochemical detection of antipsychotic drug chlorpromazine in biological and environmental samples, J. Environ. Chem. Eng., 11 (3), 110121.

[11] Zhou, Z., Gong, Y., Zhang, C., and Niu, W., 2021, A chemiluminescence sensor array for discrimination of seven toxicants, Luminescence, 36 (8), 1997–2003.

[12] Kul, A., and Sagirli, O., 2023, A new method for the therapeutic drug monitoring of chlorpromazine in plasma by gas chromatography–mass spectrometry using dispersive liquid–liquid microextraction, Bioanalysis, 15 (22), 1343–1354.

[13] Li, J., An, J., and Jiang, Y., 2020, Development of a method of hollow fiber-based solid-phase microextraction followed by ultra performance liquid chromatography-tandem mass spectrometry for determination of five antipsychotics in human whole blood and urine, J. Chromatogr. A, 1620, 461000.

[14] Li, C., Cheng, Y., and Zhou, K., 2021, Optimization of capillary electrophoresis separation conditions of chlorpromazine, promethazine and their main metabolites by RSM, Int. J. Electrochem. Sci., 16, 211140.

[15] Blazheyevskiy, M.Y., 2019, Spectrophotometric and spectrofluorimetric determination of the 2-and 10-disubstituted phenothiazines using peroxy acid oxidation, Curr. Top. Anal. Chem., 11, 67–80.

[16] Xiao, D., Jiang, Y., and Bi, Y., 2018, Molecularly imprinted polymers for the detection of illegal drugs and additives: A review, Microchim. Acta, 185 (4), 247.

[17] Al-Bayati, Y.K., and Al-Safi, A.J., 2018, Synthesis and characterization of a molecularly imprinted polymer for diclofenac sodium using (2-vinylpyridine and 2-hydroxyethyl metha acrylate) as the complexing monomer, Baghdad Sci. J., 15 (1), 0063.

[18] Al-Bayati, Y.K., and Al Khafaji, I.H., 2016, Potentiometric determination of mebeverine hydrochloride using imprinted molecular polymer in PVC matrix membrane, Iraqi J. Sci., 57 (4C), 2790–2799.

[19] Al-Bayati, Y.K., and Abd, M.F., 2017, Determination of methamphetamine drug by GC-MS based on molecularly imprinted solid-phase used meth acrylic acid and acryl amide as functional monomers, Iraqi J. Sci., 58 (4B), 2022–2034.

[20] Attaran, A.M., Mohammadi, N., Javanbakht, M., and Akbari-Adergani, B., 2014, Molecularly imprinted solid-phase extraction for selective trace analysis of trifluoperazine, J. Chromatogr. Sci., 52 (7), 730–738.

[21] Vodova, M., Nejdl, L., Pavelicova, K., Zemankova, K., Rrypar, T., Skopalova Sterbova, D., Bezdekova, J., Nuchtavorn, N., Macka, M., Adam, V., and Vaculovicova, M., 2022, Detection of pesticides in food products using paper-based devices by UV-induced fluorescence spectroscopy combined with molecularly imprinted polymers, Food Chem., 380, 132141.

[22] Farooq, S., Wu, H., Nie, J., Ahmad, S., Muhammad, I., Zeeshan, M., Khan, R., and Asim, M., 2022, Application, advancement and green aspects of magnetic molecularly imprinted polymers in pesticide residue detection, Sci. Total Environ., 804, 150293.

[23] Aldeen, R.A.K., and Al-Bayati, Y.K., 2023, Selective extraction of metformin in pharmaceutical preparation via synthesized MIP-SPE techniqu, Iraqi J. Sci., 64 (8), 3763–3778.

[24] Alizadeh, T., Ganjali, M.R., and Akhoundian, M., 2012, Synthesis and application of different nano-sized imprinted polymers for the preparation of promethazine membrane electrodes and comparison of their efficiencies, Int. J. Electrochem. Sci., 7 (8), 7655–7674.

[25] Mostafiz, B., Bigdeli, S.A., Banan, K., Afsharara, H., Hatamabadi, D., Mousavi, P., Hussain, C.M., Keçili, R., and Ghorbani-Bidkorbeh, F., 2021, Molecularly imprinted polymer-carbon paste electrode (MIP-CPE)-based sensors for the sensitive detection of organic and inorganic environmental pollutants: A review, Trends Environ. Anal. Chem., 32, e00144.

[26] Feroz, M., and Vadgama, P., 2020, Molecular imprinted polymer modified electrochemical sensors for small drug analysis: Progress to practical application, Electroanalysis, 32 (11), 2361–2386.

[27] Al-Bayati, Y.K., and Aljabari, F.I., 2016, Mefenamic acid selective membranes sensor and its application to pharmaceutical analysis, Baghdad Sci. J., 13 (4), 0829.

[28] Motaharian, A., Naseri, K., Mehrpour, O., and Shoeibi, S., 2020, Electrochemical determination of atypical antipsychotic drug quetiapine using nano-molecularly imprinted polymer modified carbon paste electrode, Anal. Chim. Acta, 1097, 214–221.

[29] Alizadeh, T., Ganjali, M.R., and Akhoundian, M., 2012, Fabrication of an extra sensitive voltammetric sensor using nanoparticles of molecularly imprinted polymer for determination of ultra-trace promethazine in plasma sample, Int. J. Electrochem. Sci., 7 (11), 10427–10441.

[30] Mahdi, A.R., Al-Bayati, Y.K., and Ameen, S.T., 2019, Preparation of a new molecularly imprinted polymers and its use in the selective extraction for determination bromhexine hydrochloride at pharmaceuticals, Iraqi J. Agric. Sci., 50 (3), 886–900.

[31] Al-Abbasi, M.A.S., Al-Bayati, Y.K., and Al-Samarrai, K.F., 2020, Synthesis of molecularly imprinted polymers (MIPS) used for estimation of betamethasone disodium phosphate (BMSP) using different functional monomers, Iraqi J. Agric. Sci., 51 (1), 483–492.

[32] Al-Bayati, Y.K., and Aljabari, F.I., 2016, Synthesis of ibuprofen-molecularly imprinted polymers used as sensors to determine drug in pharmaceutical preparations, Asian J. Chem., 28 (6), 1376–1380.

[33] Hussein, H.J., and Al-Bayati, Y.K., 2021, Determination of amoxicillin in pharmaceutical preparations by molecularly imprinted polymer in polyvinyl chloride matrix membrane, Int. J. Drug Delivery Technol., 11 (1), 232–237.

[34] Hassoon, G.S., and Al-Bayati, Y.K., 2023, Synthesis, characterization and application of calcium ion-imprinted polymeric solid-phase extraction and pre-concentration in aqueous solutions by packed-bed columns, Iraqi J. Sci., 64 (11), 5462–5475.

[35] Al-Bayati, Y.K., 2018, Estimation of some organophosphorus pesticides using carbon paste electrode coupled with molecularly imprinted polymers, Baghdad Sci. J., 15 (3), 0328.

[36] Kaya, S.I., Cetinkaya, A., and Ozkan, S.A., 2023, Molecularly imprinted polymers as highly selective sorbents in sample preparation techniques and their applications in environmental water analysis, Trends Environ. Anal. Chem., 37, e00193.

[37] Vasapollo, G., Sole, R.D., Mergola, L., Lazzoi, M.R., Scardino, A., Scorrano, S., and Mele, G., 2011, Molecularly imprinted polymers: Present and future prospective, Int. J. Mol. Sci., 12 (9), 5908–5945.

[38] Chen, J., Liu, H., Wang, C., Fan, K., Li, L., Zhang, Y., Fang, L., Yin, Z.Z., and Lü, Z., 2023, An electrochemical chlorpromazine sensor based on a gold–copper bimetallic synergetic molecularly imprinted interface on an acupuncture needle electrode, Analyst, 148 (10), 2214–2224.

[39] Bichan, M.J., Al-Abady, F.M., Al-Bayati, Y.K., and Awwadi, F.F., 2023, Preparation and computational investigation of molecular imprinted polymers for clidinium bromide, J. Indian Chem. Soc., 100 (1), 100850.

[40] Wackerlig, J., and Schirhagl, R., 2016, Applications of molecularly imprinted polymer nanoparticles and their advances toward industrial use: A review, Anal. Chem., 88 (1), 250–261.

[41] Ferreira, J.B., de Jesus Macrino, C., Dinali, L.A.F., Filho, J.F.A., Silva, C.F., Borges, K.B., and Romão, W., 2021, Molecularly imprinted polymers as a selective sorbent for forensic applications in biological samples—A review, Anal. Bioanal. Chem., 413 (24), 6013–6036.

[42] Wang, J., Liang, R., and Qin, W., 2020, Molecularly imprinted polymer-based potentiometric sensors, TrAC, Trends Anal. Chem., 130, 115980.

[43] Herrera-Chacón, A., Cetó, X., and del Valle, M., 2021, Molecularly imprinted polymers - towards electrochemical sensors and electronic tongues, Anal. Bioanal. Chem., 413 (24), 6117–6140.

[44] Ali, G.K., and Omer, K.M., 2022, Molecular imprinted polymer combined with aptamer (MIP-aptamer) as a hybrid dual recognition element for bio(chemical) sensing applications. Review, Talanta, 236, 122878.

[45] Singh, M., Singh, S., Singh, S.P., and Patel, S.S., 2020, Recent advancement of carbon nanomaterials engrained molecular imprinted polymer for environmental matrix, Trends Environ. Anal. Chem., 27, e00092.

[46] Yang, J., Feng, W., Liang, K., Chen, C., and Cai, C., 2020, A novel fluorescence molecularly imprinted sensor for Japanese encephalitis virus detection based on metal organic frameworks and passivation-enhanced selectivity, Talanta, 212, 120744.

[47] Saad, E.M., El Gohary, N.A., Abdel-Halim, M., Handoussa, H., Mohamed El Nashar, R., and Mizaikoff, B., 2021, Molecularly imprinted polymers for selective extraction of rosmarinic acid from Rosmarinus officinalis L., Food Chem., 335, 127644.

[48] Liu, X., Wu, F., Au, C., Tao, Q., Pi, M., and Zhang, W., 2019, Synthesis of molecularly imprinted polymer by suspension polymerization for selective extraction of p-hydroxybenzoic acid from water, J. Appl. Polym. Sci., 136 (3), 46984.

[49] Yang, X., Gao, Y., Ji, Z., Zhu, L.B., Yang, C., Zhao, Y., Shu, Y., Jin, D., Xu, Q., and Zhao, W.W., 2019, Dual functional molecular imprinted polymer-modified organometal lead halide perovskite: Synthesis and application for photoelectrochemical sensing of salicylic acid, Anal. Chem., 91 (15), 9356–9360.

[50] Jamieson, O., Soares, T.C.C., de Faria, B.A., Hudson, A., Mecozzi, F., Rowley-Neale, S.J., Banks, C.E., Gruber, J., Novakovic, K., Peeters, M., and Crapnell, R.D., 2020, Screen printed electrode based detection systems for the antibiotic amoxicillin in aqueous samples utilising molecularly imprinted polymers as synthetic receptors, Chemosensors, 8 (1), 5.

[51] Crapnell, R.D., Dempsey-Hibbert, N.C., Peeters, M., Tridente, A., and Banks, C.E., 2020, Molecularly imprinted polymer based electrochemical biosensors: Overcoming the challenges of detecting vital biomarkers and speeding up diagnosis, Talanta Open, 2, 100018.

[52] Zeng, H., Yu, X., Wan, J., and Cao, X., 2020, Rational design and synthesis of molecularly imprinted polymers (MIP) for purifying tylosin by seeded precipitation polymerization, Process Biochem., 94, 329–339.

[53] Zhao, G., Liu, J., Liu, M., Han, X., Peng, Y., Tian, X., Liu, J., and Zhang, S., 2020, Synthesis of molecularly imprinted polymer via emulsion polymerization for application in solanesol separation, Appl. Sci., 10 (8), 2868.

[54] Włoch, M., and Datta, J., 2019, Synthesis and polymerisation techniques of molecularly imprinted polymers, Compr. Anal. Chem., 86, 17–40.

[55] Pu, J., Wang, H., Huang, C., Bo, C., Gong, B., and Ou, J., 2022, Progress of molecular imprinting technique for enantioseparation of chiral drugs in recent ten years, J. Chromatogr. A, 1668, 462914.

[56] Al-Bayati, Y.K., and Hadi, E.A., 2022, Synthesis of new molecularly imprinted solid-phase uesd styrene and allyl chloride base functional monomer for determination of cocaine by GC-MASS and its clinical applications, Iraqi J. Agric. Sci., 53 (4), 760–766.

[57] Al-Bayati, Y.K., 2023, Synthesis, characterization and application of meethamphetamine – imprinted polymeric solid-phase, Iraqi J. Agric. Sci., 54 (4), 1173–1182.

[58] Gu, Z., Dong, Y., Xu, S., Wang, L., and Liu, Z., 2021, Molecularly imprinted polymer‐based smart prodrug delivery system for specific targeting, prolonged retention, and tumor microenvironment‐triggered release, Angew. Chem., Int. Ed., 60 (5), 2663–2667.

[59] Han, S., Su, L., Zhai, M., Ma, L., Liu, S., and Teng, Y., 2019, A molecularly imprinted composite based on graphene oxide for targeted drug delivery to tumor cells, J. Mater. Sci., 54 (4), 3331–3341.

[60] Abbas, S.M., Abood, M.E., and Hassan, R.O., 2023, Synthesis, characterization, and application of external gelation of sodium alginate nanoparticles in molecular imprinting for separation and drug delivery of tenoxicam, Chem. Pap., 77 (5), 2483–2494.

[61] Arabi, M., and Chen, L., 2022, Technical challenges of molecular-imprinting-based optical sensors for environmental pollutants, Langmuir, 38 (19), 5963–5967.

[62] Kanokpaka, P., Chang, L.Y., Wang, B.C., Huang, T.H., Shih, M.J., Hung, W.S., Lai, J.Y., Ho, K.C., and Yeh, M.H., 2022, Self-powered molecular imprinted polymers-based triboelectric sensor for noninvasive monitoring lactate levels in human sweat, Nano Energy, 100, 107464.

[63] Li, X., Yang, B., Xiao, K., Duan, H., Wan, J., and Zhao, H., 2021, Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts, Water Res., 203, 117541.

[64] Li, X., Wan, J., Wang, Y., Ding, S., and Sun, J., 2021, Improvement of selective catalytic oxidation capacity of phthalates from surface molecular-imprinted catalysis materials: Design, mechanism, and application, Chem. Eng. J., 413, 127406.

[65] Mohamed, S., Balieu, S., Petit, E., Galas, L., Schapman, D., Hardouin, J., Baati, R., and Estour, F., 2019, A versatile and recyclable molecularly imprinted polymer as an oxidative catalyst of sulfur derivatives: A new possible method for mustard gas and V nerve agent decontamination, Chem. Commun., 55 (88), 13243–13246.

[66] Ganjali, M.R., Alizade, T., Larijani, B., Faridbod, F., and Norouzi, P., 2012, Nano-composite clozapine potentiometric carbon paste sensor based on biomimetic molecular imprinted polymer, Int. J. Electrochem. Sci., 7 (5), 4756–4765.

[67] Moreira, F.T.C., and Sales, M.G.F., 2011, Biomimetic sensors of molecularly-imprinted polymers for chlorpromazine determination, Mater. Sci. Eng., C, 31 (5), 1121–1128.

[68] Motaharian, A., Hosseini, M.R.M., and Naseri, K., 2019, Determination of psychotropic drug chlorpromazine using screen printed carbon electrodes modified with novel MIP-MWCNTs nano-composite prepared by suspension polymerization method, Sens. Actuators, B, 288, 356–362.

[69] Lu, Z., Wei, K., Ma, H., Xiong, Q., Li, Y., Sun, M., Wang, X., Wang, Y., Wu, C., Su, G., Bai, Y., Deng, R., Ye, J., Zhou, C., and Rao, H., 2023, Nanoarchitectonics of on–off ratiometric signal amplified electrochemical sensor for chlorpromazine with molecularly imprinted polymer based on Ni-MOF/Fe-MOF-5 hybrid Au nanoparticles, Sep. Purif. Technol., 327, 124858.

[70] Niu, W., Feng, N., Nie, F., and Lu, J., 2006, Investigating the post-chemiluminescence behavior of phenothiazine medications in the luminol–potassium ferricyanide system: Molecular imprinting–post-chemiluminescence method for the determination of chlorpromazine hydrochloride, Anal. Bioanal. Chem., 385 (1), 153–160.

[71] Xia, W.Q., Huang, J., Wang, G.N., Liu, J., and Wang, J.P., 2018, Molecularly imprinted polymer based microtiter chemiluminescence array for determination of phenothiazines and benzodiazepines in pork, Anal. Biochem., 554, 9–15.

[72] Nishimura, K., and Haginaka, J., 2019, Preparation and evaluation of molecularly imprinted polymers for promazine and chlorpromazine by multi-step swelling and polymerization: The application for the determination of promazine in rat serum by column-switching LC, Anal. Sci., 35 (6), 659–664.

[73] Nishimura, K., Okamura, N., Kimachi, T., and Haginaka, J., 2019, Evaluation of molecularly imprinted polymers for chlorpromazine and bromopromazine prepared by multi-step swelling and polymerization method—The application for the determination of chlorpromazine and its metabolites in rat plasma by column-switching LC, J. Pharm. Biomed. Anal., 174, 248–255.

[74] Song, S., Shi, X., Li, R., Lin, Z., Wu, A., and Zhang, D., 2008, Extraction of chlorpromazine with a new molecularly imprinted polymer from pig urine, Process Biochem., 43 (11), 1209–1214.

[75] Figueiredo, E.C., Sanvido, G.B., Zezzi Arruda, M.A., and Eberlin, M.N., 2010, Molecularly imprinted polymers as analyte sequesters and selective surfaces for easy ambient sonic-spray ionization, Analyst, 135 (4), 726–730.

[76] de Oliveira Isac Moraes, G., da Silva, L.M.R., dos Santos-Neto, Á.J., Florenzano, F.H., and Figueiredo, E.C., 2013, A new restricted access molecularly imprinted polymer capped with albumin for direct extraction of drugs from biological matrices: The case of chlorpromazine in human plasma, Anal. Bioanal. Chem., 405 (24), 7687–7696.

[77] Haginaka, J., Nishimura, K., Kimachi, T., Inamoto, K., Takemoto, Y., and Kobayashi, Y., 2019, Retention and molecular-recognition mechanisms of molecularly imprinted polymers for promazine derivatives, Talanta, 205, 120149.

[78] Rouhani, M., and Soleymanpour, A., 2020, Molecularly imprinted sol-gel electrochemical sensor for sildenafil based on a pencil graphite electrode modified by Preyssler heteropolyacid/gold nanoparticles/MWCNT nanocomposite, Microchim. Acta, 187 (9), 512.

DOI: https://doi.org/10.22146/ijc.94705