Cobalt Doping on Zirconium Titanate as a Potential Photocatalyst with Visible-Light-Response

https://doi.org/10.22146/ijc.49459

Emilya Faridatul Sulaikhah(1), Rian Kurniawan(2), Mokhammad Fajar Pradipta(3), Wega Trisunaryanti(4), Akhmad Syoufian(5*)

(1) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(3) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(4) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(5) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(*) Corresponding Author

Abstract


Synthesis of cobalt-doped zirconium titanate (Co-doped ZrTiO4) as a potential photocatalyst with visible-light-response had been conducted. Materials used in this research were titanium tetraisopropoxide (TTIP) as a precursor of TiO2, ZrO2 as another semiconductor for coupling, and CoSO4·7H2O as the source of cobalt dopant. The composite was prepared by the sol-gel method with various cobalt contents and calcination temperatures. Composites with various Co dopant contents (0, 1, 3, 5, 7, and 9% (Co wt./Ti wt.)) were calcined at 500 °C for 4 h. In addition, the composite with 5% of dopant content was calcined at 700 and 900 °C to observe the influence of calcination temperature. All samples were characterized by using X-ray powder diffraction method (XRD), Fourier-transform infrared spectroscopy (FTIR), specular reflectance UV-Vis spectroscopy (SRUV), and scanning electron microscopy equipped with X-ray energy dispersive spectroscopy (SEM-EDS). Co-doped ZrTiO4 with the lowest bandgap (2.94 eV) was achieved in a sample containing 3% of cobalt content calcined at 500 °C.

Keywords


cobalt; dopant; Co-doped ZrTiO4; photocatalyst; sol-gel

Full Text:

Full Text PDF


References

[1] dos Santos, A.B., Cervantes, F.J., and van Lier, J.B., 2007, Review paper on current technologies for decolourisation of textile wastewaters: Perspectives for anaerobic biotechnology, Bioresour. Technol., 98 (12), 2369–2385.

[2] Mirjalili, M., Nazarpoor, K., and Karimi, L., 2011, Eco-friendly dyeing of wool using natural dye from weld as co-partner with synthetic dye, J. Cleaner Prod., 19 (9-10), 1045–1051.

[3] Utubira, Y., Wijaya, K., Triyono, T., and Sugiharto, E., 2006, Preparation and characterization of TiO2-zeolite and its application to degrade textille wastewater by photocatalytic method, Indones. J. Chem., 6 (3), 231–237.

[4] Alinsafi, A., Evenou, F., Abdulkarim, E.M., Pons, M.N., Zahraa, O., Benhammou, A., Yaacoubi, A., and Nejmeddine, A., 2007, Treatment of textile industry wastewater by supported photocatalysis, Dyes Pigm., 74 (2), 439–445.

[5] Qamar, M., Saquib, M., and Muneer, M., 2005, Photocatalytic degradation of two selected dye derivatives, chromotrope 2B and amido black 10B, in aqueous suspensions of titanium dioxide, Dyes Pigm., 65 (1), 1–9.

[6] Wunderlich, W., Oekermann, T., Miao, L., Hue, N.T., Tanemura, S., and Tanemura, M., 2004, Electronic properties of nano-porous TiO2- and ZnO-thin films-comparison of simulations and experiments, J. Ceram. Process. Res., 5 (4), 343–354.

[7] Di Paola, A., Bellardita, M., and Palmisano, L., 2013, Brookite, the least known TiO2 photocatalyst, Catalysts, 3 (1), 36–73.

[8] Li, G., Chen, L., Graham, M.E., and Gray, K.A., 2007, A comparison of mixed phase titania photocatalysts prepared by physical and chemical methods: The importance of the solid-solid interface, J. Mol. Catal. A: Chem., 275 (1-2), 30–35.

[9] Rehman, S., Ullah, R., Butt, A.M., and Gohar, N.D., 2009, Strategies of making TiO2 and ZnO visible light active, J. Hazard. Mater., 170 (2-3), 560–569.

[10] Huo, J., Hu, Y., Jiang, H., Hou, X., and Li, C., 2014, Continuous flame synthesis of near surface nitrogen doped TiO2 for dye-sensitized solar cells, Chem. Eng. J., 258, 163–170.

[11] Li, Z., Wnetrzak, R., Kwapinski, W., and Leahy, J.J., 2012, Synthesis and characterization of sulfated TiO2 nanorods and ZrO2/TiO2 nanocomposites for the esterification of biobased organic acid, ACS Appl. Mater. Interfaces, 4 (9), 4499–4505.

[12] Siddhapara, K.S., and Shah, D.V., 2014, Study of photocatalytic activity and properties of transition metal ions doped nanocrystalline TiO2 prepared by sol-gel method, Adv. Mater. Sci. Eng., 2014, 462198.

[13] Choi, J., Park, H., and Hoffmann, M.R., 2010, Effects of single metal-ion doping on the visible-light photoreactivity of TiO2, J. Phys. Chem. C, 114 (2), 783–792.

[14] Siddhapara, K., and Shah, D., 2012, Characterization of nanocrystalline cobalt doped TiO2 sol-gel material, J. Cryst. Growth, 352 (1), 224–228.

[15] Zhang, X., and Liu, Q., 2008, Visible-light-induced degradation of formaldehyde over titania photocatalyst co-doped with nitrogen and nickel, Appl. Surf. Sci., 254 (15), 4780–4785.

[16] Kim, J.Y., Kim, C.S., Chang, H.K., and Kim, T.O., 2011, Synthesis and characterization of N-doped TiO2/ZrO2 visible light photocatalysts, Adv. Powder Technol., 22 (3), 443–448.

[17] Syoufian, A., Manako, Y., and Nakashima, K., 2015, Sol-gel preparation of photoactive srilankite-type zirconium titanate hollow spheres by templating sulfonated polystyrene latex particles, Powder Technol., 280, 207–210.

[18] Andita, K.R., Kurniawan, R., and Syoufian, A., 2019, Synthesis and characterization of Cu-doped zirconium titanate as a potential visible-light responsive photocatalyst, Indones. J. Chem., 19 (3), 761–766.

[19] Kurniawan, R., Sudiono, S., Trisunaryanti, W., and Syoufian, A., 2019, Synthesis of iron-doped zirconium titanate as a potential visible-light responsive photocatalyst, Indones. J. Chem., 19 (2), 454–460.

[20] Wellia, D.V., Xu, Q.C., Sk, M.A., Lim, K.H., Lim, T.M., and Tan, T.T.Y., 2011, Experimental and theoretical studies of Fe-doped TiO2 films prepared by peroxo sol-gel method, Appl. Catal., A, 401, 98–105.

[21] Tomar, L.J., Bhatt, P.J., Desai, R.K., and Chakrabarty, B.S., 2014, Effect of preparation method on optical and structural properties of TiO2/ZrO2 nanocomposite, J. Nanotechnol. Adv. Mater., 2 (1), 27–33.

[22] Samet, L., Nasseur, J.B., Chtourou, R., March, K., and Stephan, O., 2013, Heat treatment effect on the physical properties of cobalt doped TiO2 sol-gel materials, Mater. Charact., 85, 1–12.

[23] Nankya, R., and Kim, K.N., 2016, Sol–gel synthesis and characterization of Cu–TiO2 nanoparticles with enhanced optical and photocatalytic properties, J. Nanosci. Nanotechnol., 16 (11), 11631–11634.

[24] Choudhury, B., Choudhury, A., Maidul Islam, A.K.M., Alagarsamy, P., and Mukherjee, M., 2011, Effect of oxygen vacancy and dopant concentration on the magnetic properties of high spin Co2+ doped TiO2 nanoparticles, J. Magn. Magn. Mater., 323 (5), 440–446.

[25] Deng, Q.R., Xia, X.H., Guo, M.L., Gao, Y., and Shao, G., 2011, Mn-doped TiO2 nanopowders with remarkable visible light photocatalytic activity, Mater. Lett., 65 (13), 2051–2054.



DOI: https://doi.org/10.22146/ijc.49459

Article Metrics

Abstract views : 3202 | views : 2827


Copyright (c) 2020 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.