THE EFFECT OF ACETIC ACID ON PROPERTIES OF COCONUT SHELL FILLED LOW DENSITY POLYETHYLENE COMPOSITES

https://doi.org/10.22146/ijc.21439

Z.H. Tengku Faisal(1*), Faisal Amri(2), H. Salmah(3), Iqmal Tahir(4)

(1) Faculty of Engineering, Medan Area University, Medan 20233
(2) School of Materials Engineering, Division of Polymer Engineering, Universiti Malaysia Perlis, 02600 Jejawi Perlis
(3) School of Materials Engineering, Division of Polymer Engineering, Universiti Malaysia Perlis, 02600 Jejawi Perlis
(4) Department of Chemistry, Faculty of Mathematics and Natural Sciences,Universitas Gadjah Mada, Jl. Sekip Utara, Pos Box: BLS 21, Yogyakarta 55281
(*) Corresponding Author

Abstract


Natural lignocellulosics have an outstanding potential as reinforcement in thermoplastics. Coconut shell is one of natural lignocellulosic material. In this study, coconut shell (CS) was use as filler in low density polyethylene (LDPE) composites. The effect of surface treatment of coconut shell (CS) with acetic acid (acetylation) on mechanical properties, thermal properties and morphology were studied. The acetylation treatment has improved the tensile strength, elongation at break and Young's modulus of LDPE/CS composites. Thermogravimetric analysis (TGA) results show that the acetylated composites has better thermal stability compared to untreated composites at 600 °C. Differential scanning calorimetry (DSC) analysis showed that the esterification treatment increases the crystallinity of LDPE/CS composites. It was found that coconut shell acts as a nucleation agent in the presence of acrylic acid. The scanning electron microscopy (SEM) study of the tensile fracture surface of acetylated composites indicates that the presence of acetic acid increased the interfacial interaction.

Keywords


low density polyethylene; coconut shell; acetic acid; composites

Full Text:

Full Text PDF


References

[1] Bolton, J., 1995, Outlook Agric., 24, 85–89.

[2] Gassan, J., and Cutowski, V.S., 2000, Compos. Sci. Technol., 60, 28, 57–63.

[3] Rowell, R.M., 1993, In Cellulosic: Pulp, Fiber and Environment Aspect, Kennedy, J.F., Philips, G.O., and William, P.A., Ed., Ellis Horwood, London.

[4] Salmah, Ismail, H., and Bakar, A.A., 2005, J. Reinf. Plast. Compos., 25, 43–58.

[5] Mwaikambo, L.Y., and Ansell, M.P., 2002, J. Appl. Polym. Sci., 84, 2222–2234.

[6] Marcovich, N.E., Aranguren, M.I., and Reboredo, M.M., 2001, Polymer, 42, 815–825.

[7] Cantiro, G., Arbelaiz, A., Mugika, F., Valea, A., and Mondragon, I., 2003, J. Reinf. Plast. Compos., 22, 1, 37–50.

[8] Rowell, R.M., Young, R.A., and Rowell, J.K., 1997, Paper and Composites from Agrobased Resources. CRC Press: Florida,

[9] Khalil, K.A., Ismail, H., Ahmad, M.N., Arrifin, A., and Hassan, K., 2001, Polym. Int., 50, 4, 395–402.

[10] Sreekala, M.S., Kumaran, M.G., and Thomas, S., 1997, J. Appl. Polym. Sci., 66, 5, 821–835.

[11] Rana, A.K., Basak, R.K., Mitra, B.C., Lawther, M., and Banerjee, A.N., 1997, J. Appl. Polym. Sci., 64, 8, 1517–1523.

[12] Nabi-Saheb, D., and Jog, J.P., 1999, Adv. Polym. Tech., 18, 4, 351–363.

[13] Khalil, H.P.S.A., Ismail, H., Rozman, H.D., and Ahmad, M.N., 2001, Eur. Polym. J., 37, 5, 1037–1045.

[14] Felix, J.M., and Gatenholm, P., 1991, J. Appl. Polym. Sci., 42, 3, 609–620.

[15] Baiardo, M., Zini, E., and Scandola, M., 2004, Composites Part A, 35, 703–710.

[16] Zafeiropoulos, N.E., Baillie, C.A., and Hodgkinson, J.M., 2002, Composites Part A, 33, 1185–1190.

[17] Sapuan, S.M., Harimi, M., and Maleque, M.A., 2003, Arabian J. Sci. Eng., 28, 2B, 173–181.

[18] Joseph, P.V., Joseph, K., Thomas, S., Pillai, C.K.S., Prasad, V.S., Greoninckx, G., and Sarkisova, M., 2003, Composite Part A, 34, 253–266.

[19] Oksman, K., and Clemons, C., 1998, J. Appl. Polym. Sci., 67, 1503–1513.

[20] Marti-Ferrer, F., Vilaplana, F., Ribes-Greus, A., Benedito-Borras, A., and Sanz-Box, C., 2005, J. Appl. Polym. Sci., 99, 1823–1831.

[21] Kim, H.S., Lee, B.H., Choi, S.W., Kim, S., and Kim, H.J., 2007, Composites, 38, 6, 1473–1482.

[22] Kazayawoko, M., Balatinecz, J.J., Woodhams, R.T., and Law, S. 1997, J. Reinf. Plast. Compos., 16, 15, 1383–1406.

[23] Ichazo, M.N., Albano, C., Gonzales, J., Perera, R., and Candal, M.V. 2001, Compos. Struct., 54, 2-3, 207–214.

[24] Pasquini, D., Teixeira, E.M., Curvelo, A.A.S.C., Belgacem, M.N., and Dufresne, A., 2007, Compos. Sci. Technol., 68, 1, 193–201.

[25] Habibi, Y., El-Zawawy, W.K., Ibrahim, M.M., and Dufresne, A., 2008, Compos. Sci. Technol., 68, 7-8, 1877–1885.

[26] Kim, H.S., Yang, H.S., Kim, H.J., and Park, H.J., 2004, J. Therm. Anal. Calorim., 76, 2, 395–404.



DOI: https://doi.org/10.22146/ijc.21439

Article Metrics

Abstract views : 2424 | views : 3065


Copyright (c) 2010 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.