Photocatalytic Activity of Cellulose Nanocrystals/Zinc Oxide Nanocomposite Against Thiazine Dye under UV and Visible Light Irradiation

https://doi.org/10.22146/ajche.72331

Rey Marc T. Cumba(1), Clark B. Ligalig(2), Jhea Mae D. Tingson(3), Meralin P. Molina(4), Arnold C. Alguno(5), Custer C. Deocaris(6), Felmer Latayada(7), Indah Primadona(8), Rey Yonson Capangpangan(9*)

(1) Material Science and Polymer Chemistry Laboratory, Caraga State University, Philippines, 8600
(2) Material Science and Polymer Chemistry Laboratory, Caraga State University, Philippines, 8600
(3) Material Science and Polymer Chemistry Laboratory, Caraga State University, Philippines, 8600
(4) Material Science and Polymer Chemistry Laboratory, Caraga State University, Philippines, 8600
(5) Department of Physics, MSU-Iligan Institute of Technology, Philippines, 9200
(6) Philippine Nuclear Research Institute, Department of Science and Technology, Philippines, 1101
(7) Chemistry Department, Caraga State University, Philippines, 8600
(8) Research Unit for Clean Tech., Indonesian Institute of Sciences, Bandung, Indonesia, 40135
(9) Department of Physical Sciences and Mathematics, College of Science and Environment, Mindanao State University (MSU) at Naawan, Naawan, Philippines, 9023
(*) Corresponding Author

Abstract


Organic dyes used in the food and textile industries are the primary sources of environmental contamination due to their high toxicity and nonbiodegradability. This paper describes the synthesis of cellulose nanocrystals/zinc oxide (CNC/ZnO) nanocomposite via the sol-gel method. Various characterization techniques such as FTIR spectroscopy, UV-Vis spectroscopy, and FESEM-EDX analysis were done. FTIR and UV-Vis analyses initially confirmed the formation of CNC/ZnO nanocomposites. FESEM-EDX showed a fiber-like structure with agglomerated particles on the CNC-ZnO image, suggesting the functionalization of ZnO nanoparticles onto the CNC. The photocatalytic potential of the CNC/ZnO nanocomposite was then evaluated by degrading 10 ppm thiazine dye (methylene blue) solution. The solution was irradiated with UV and visible light at an ambient temperature. The degradation was monitored at different time intervals using a UV spectrophotometer to measure the absorbance value intermittently. Results on the photocatalytic activity indicated that the synthesized CNC/ZnO nanocomposite showed faster degradation under UV light irradiation than the visible light, with an efficiency of 96.11% and 85.60%, respectively, after 180 mins of light irradiation. Further, the results suggest that the synthesized CNC/ZnO nanocomposite showed great promise as a sustainable material for the degradation of organic contaminants in an aqueous solution.


Keywords


Nanocomposite, Photodegradation, Cellulose Nanocrystals, Methylene Blue, Photocatalyst

Full Text:

PDF


References

Azizi, S., Ahmad, M., Mahdavi, M., Abdolmohammadi, S. (2013). “Preparation, characterization, and antimicrobial activities of ZnO nanoparticles/cellulose nanocrystal nanocomposites,” Bioresources, 8(2), 1841-1851.

An, V.N., Van, T.T.T., Nhan, H.T.C., Hieu, L.V. (2020). “Investigating Methylene Blue adsorption and photocatalytic activity of ZnO/CNC nanohybrids,” J. Nanomater., 2020, 6185976.

Boujemaoui, A., Mongkhontreerat, S., Malmström, E., and Carlmark, A. (2015). “Preparation and characterization of functionalized cellulose nanocrystals,” Carbohyd. Polym., 115, 457.

Cai, J., Kimura, S., Wada, M., Kuga, S. (2009). “Nanoporous cellulose as metal nanoparticles support,” Biomolecules, 10, 87-94.

Guan, Y., Yu, H., Abdalkarim, S.Y.H., Wang, C., Tang, F., Marek, J., Chen, W., Militky, J., and Yao, J. (2019). “Green one-step synthesis of ZnO/cellulose nanocrystal hybrids with modulated morphologies and superfast absorption of cationic dyes,” Int. J. Biol. Macromol., 132, 51–62.

Hong, R., Pan, T., Qian, J., Li, H. (2006). “Synthesis and surface modification of ZnO nanoparticles,” Chem. Eng. J., 119, 71–81.

Hood, M., Mari, M., and Muñoz-Espí, R. (2014). “Synthetic strategies in the preparation of polymer/inorganic hybrid nanoparticles,” Materials, 7, 4057–4087.

Hospodarova, V., Singovszka, E., Stevulova, N. (2018). “Characterization of cellulosic fbers by FTIR spectroscopy for their further implementation to building materials,” Am. .J Anal. Chem., 9(6), 303–310.

Islam, C.M.S., Sisler, L. Chen, J, and Tam, K.C. (2018). “Cellulose nanocrystal (CNC)–inorganic hybrid systems: synthesis, properties and applications,” J. Mater. Chem. B, 6, 864–883

Kaloo, M.A., Bhat, B.A., Sheergojri, G.A., She, T.I. (2018). “Elimination of dyes from waste water via adsorption materials,” Mat. Sci. Res. India, 15, 141-144.

Kaushik, M. and Moores, A. (2016). “Review: nanocelluloses as versatile supports for metal nanoparticles and their applications in catalysis,” Green Chem., 18, 622–37.

Lani, N.S., Ngadi, N., Johari, A., Jusoh, M. (2014). “Isolation, characterization, and application of nanocellulose from oil palm empty fruit bunch fiber as nanocomposites,” J. Nanomatter, 1–9.

Li, J.H., Hong, R.Y., Li, M.Y., Li, H.Z., Zheng, Y., Ding, J. (2009). “Effects of ZnO nanoparticles on the mechanical and antibacterial properties of polyurethane coatings,” Prog. Org. Coat., 64, 504-509.

Li, W.C., Guo, R., Lan, Y., Zhang, Y., Xue, W. and Zhang, Y. (2014). “Preparation and properties of cellulose nanocrystals reinforced collagen composite films,” J. Biomed. Mater. Res., A102, 1131–9.

Licayan, K.D., Manigo, J.P., Oracion, J.P., De La Rosa, L., Alguno, A., Deocaris, C., Capangpangan, R. (2021). “Synthesis and characterization of Fe3O4/BiOCl/Cu2O composite as photocatalyst for the degradation of organic dyes,” Mater. Today: Proceedings, 46(4), 1663-1667.

Lin, N. and Dufresne, A. (2014). “Nanocellulose in biomedicine: current status and future prospect,” Eur. Polym. J., 59, 302–325.

Miao C. W. and Hamad W. Y. (2013). “Cellulose reinforced polymer composites and nanocomposites: a critical review,” Cellulose, 20, 2221–62.

Pooyan, P., Tannenbaum, R. and Garmestani, H. (2012). “Mechanical behavior of a cellulose-reinforced scaffold in vascular tissue engineering,” J. Mech. Behav. Biomed. Mater., 7, 50–9.

Pudukudy, M. and Yaakob, Z. (2014). “Facile Synthesis of quasi spherical ZnO nanoparticles with excellent photocatalytic activity,” J. Clust. Sci., 26, 1187–1201.

Pullawan, T., Wilkinson, A.N. and Eichhorn, S.J. (2012). “Influence of magnetic field alignment of cellulose whiskers on the mechanics of all cellulose nanocomposites,” Biomacromolecules, 13, 2528–36.

Pung, S.Y., Lee, W.P., Aziz, A. (2012). “Kinetic study of organic dye degradation using ZnO particles with different morphologies as a photocatalyst,” Int. J. Inorg. Chem., 83.

Saeed, K., Khan, I., Shah, T., Park, S.Y. (2015). “Synthesis, characterization and photocatalytic activity of silver nanoparticles/amidoxime modified polyacrylonitrile nanofibers,” Fibers Polym., 16, 1870–187.

Venkateshaiah, A., Cheong, J.Y., Shin, S.H., Akshaykumar, K.P., Yun, T.G., Bae, J., Wacławek, S., Cerník, M., Agarwal, S., Greiner, A., et al. (2020). “Recycling Non-Food-Grade Tree Gum Wastes into Nanoporous Carbon for Sustainable Energy Harvesting,” Green Chem., 22, 1198–1208.

Wang, K., Yu, L., Yin, S., Li, H. (2009). “Photocatalytic degradation of methylene blue on magnetically separable FePc/Fe3O4 nanocomposite under visible irradiation,” Pure Appl. Chem., 81, 2327–2335.

Wei, H., Rodriguez, K., Renneckar, S., and Vikesland, P.J. (2014). “Environmental science and engineering applications of nanocellulose-based nanocomposites,” Environ. Sci.: Nano, 1, 302–316.

Winiarski, J., Tylus, W., Winiarska, K., Szczygieł, I., Szczygieł, B. (2018). “XPS and FTIR Characterization of selected synthetic corrosion products of zinc expected in neutral environment containing chloride ions,” J. Spectrosc., 2018, 1.



DOI: https://doi.org/10.22146/ajche.72331

Article Metrics

Abstract views : 4873 | views : 1922

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.