Yield Study of Tea Tree Essential Oil Using Microwave-Assisted Process

https://doi.org/10.22146/ajche.50150

Amer Ali Saoud(1*), Rosli Mohd Yunus(2), Ramlan Abd. Aziz(3)

(1) Curtin University of 7echnology, School of Engineering and Science CDT 250, 98009 Miri, Sarawak, MALAYSIA
(2) Facultyof Chemical andNatural Resources Engineering Universiti 7eknologi Malaysia, 81310 Skudai, Johor, MlLAYSIA
(3) Facultyof Chemical andNatural Resources Engineering Universiti 7eknologi Malaysia, 81310 Skudai, Johor, MlLAYSIA
(*) Corresponding Author

Abstract


There have been developments on the use of microwave to accelerate the digestion of solid materials, the heating of materials, and, more recently, the extraction of solute from solids via solvent as extracting medium. Microwave-assisted process (MAP) was used to accelerate the extraction of target compounds. It can be used for the extraction of compounds from various plant and animal tissues or of undesirable components from raw materials. Tea tree leaves were used in this study to investigate the applicability of microwave irradiation for essential oil extraction. The microwave parameters studied were tea tree leaves/ethanol ratio as well as required dose of microwave and time of irradiation. Different ratios of tea tree leaves/ethanol had been examined in order to obtain the optimal feed/solvent ratio that would give the highest yield of extracted essential oil. The required number of microwave doses that provided an accomplished extraction process had been ascertained. The optimal time of microwave exposure was found to be at 3 min. The measurements of extracted tea tree essential oil constituents (Le., cineole, a-pinene, and y-terpinene) that represent the major constituents were performed using gas chromatography (GC) analysis to estimate the yield of extracted tea tree essential oil.

Keywords


Essential oil, ethanol, extraction, microwave-assisted process (MAP), and tea tree leaves.

Full Text:

PDF


References

  1. Chen, S., and Spiro, M. (1994). "Study of microwave extraction of essential oil constituents from plant materials," J Microwave Power Electromagnetic Energy, 29, 231-241.
  2. Craveiro,A. A., Matos, F.J. A., and Alencar,J. W. (1989). "Microwaveextractionofan essential oil,"J. Ravor and Fragrance,4,43-44.
  3. Ganzler, K., Salgo, A., and Volko, K. (1986). "Determination of lead content on particulate matter filters by microwave extraction and analysis by atomic absorption spectrometry," J. Chromatography, 371, 299-306.
  4. Jessie, L., Hays, M., and Wise, S. (1994). "Efficiency of microwave energy in extraction process," Paper 1146, Pittsburgh Conference and Exposition, Chicago, IL.
  5. Jin-yu Hao, WeiHan, Shun-de Huang, Bo-yong Xue, and XiuDeng. (2002). "Microwave- assisted extraction of artemisinin from Artemisiaasnnua L.," J Separationand PurificationTechnology,28, 191-196.
  6. Lawless,J. (1997). The complete illustrated guide to aromatherapy Element Books Limited.18-25.
  7. Marie,E.L., Farid,C., and Jacqueline, S (2004) "Solvent-free microwave extraction S. (2004). of essential oil from aromatic herbs: Comparison with conventional hydro- distillation,"J.Chromatogr. 1043,323- 327.
  8. Pare, J. R. J. (1995). "Microwave-assisted extraction from materials containing organic matter," US patent, 5,458,897.
  9. Weseler,A.,Geiss, H. K.,Saller,R., and Reichling, J. (2002). "Anti fungal effect of Australian tea tree oil on Malasseziapachydermatis isolated from canines suffering from cutaneous skin disease," J Schweizer Archiv Fur Tierheilkunde,144,215-221.
  10. Whish,P.M., William,J. , and Richard,R. (1996). "Effectsof post harvest drying on the yield of tea tree oil (Melaleuca altemifolia)," J. Essent OilRes., 8, 47-51.



DOI: https://doi.org/10.22146/ajche.50150

Article Metrics

Abstract views : 1727 | views : 1437

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.