Graphical Separation Performance-Exergy Analysis for Revamping of Distillation Column

https://doi.org/10.22146/ajche.50118

Arief Budiman(1*)

(1) Chemical Engineering Department, Gadjah Mada University, Yogyakarta, Indonesia
(*) Corresponding Author

Abstract


We have invented graphical representation of separation performance and the exergy loss of all subprocesses in a distillation column on material-utilization diagram (MUD). The diagram display flowrate of liquid and gas as abscissa and ln x and ln y as ordinate. This diagram is useful for qualifying and quantifying the exergy loss in a distillation column, since exergy gain and exergy loss in the liquid and gas phases as well as in the phase change, can be displayed in a single figure. This paper is proposed to apply this MUD for revamping of distillation column.

Keywords


Distillation column , exergy analysis, MUD, revamping

Full Text:

PDF


References

  1. Barletta, A.F. (1998). “Revamping Crude Unit”, Hydrocarbon Processing, 51-57, February 1998 issue.
  2. Budiman, A. and Ishida, M. (1996). “Three- dimensional Graphical Exergy Analysis of a Distillation Column”, J. Chem. Eng. Japan, 29, 4, 662-668.
  3. Budiman, A. and Ishida M. (1998). ”Optimal Side Heating and Cooling in a Distillation Column”, Energy-the International Journal, 23, 5, 365-372.
  4. Budiman, A. and Ishida, M. (2004). “A New Method for Disclosing Internal Phenomena in a Distillation Column by use of Material Utilization Diagram,” Energy-the International Journal, 29, 2213- 2223.
  5. Budiman, A. Joko, S. Rimbo, B. and Sutijan. (2004). “Verification of Non-Equilibrium Model in Distillation Column for Binary Mixture”, Indonesian Chemical Engineering Journal, vol 3, 1, August 2004.
  6. Budiman, A. Sutijan, Erilia, Y. and Rimbo, B. (2005). “Verification of Mass Transfer Model of Non Ideal Liquid in Distillation Column”, Seminar Nasional Teknologi Proses Kimia VI, UI-Jakarta, March 2005.
  7. Budiman, A. Sutijan, Rimbo, B. and Doddy, P.W. (2006). “Non-equilibrium model in a Distillation Column: Simulation and Validation”, Seminar Nasional Teknik Kimia Indonesia 2006, UNSRI-Palembang.
  8. Budiman, A. and Sutijan. (2007). “Multi- component Distillation Column on Material Utilization Diagram”, Regional Symposium on Chemical Engineering, RSCE, Yogyakarta, December 2007.
  9. Ishida, M. and Nakagawa, N. (1985). “Exergy Analysis of Perforation System and Its Combination with a Distillation Column Based on an Energy Utilization Diagram”, J. Membrane Sci., 24: 271-283.
  10. Kaiser, V. and Gourlia, J.P. (1985).”The Ideal- Column Concept: Applying Exergy to Distillation”, Chem.Eng., 19, 45, 45-53.
  11. King, C.J., (1971), Separation Processes, 2nd. ed., McGraw-Hill, New York.
  12. Linhoff, B., (1984). ”Pinch Technology Has Come Age”, Chem.Eng.Prog., 80, 7, 33-40.
  13. Mix, T.S., Dweeck, J.S. and Weinberg, M., (1978). “Energy Conservation in Distillation”, Chem.Eng.Prog., 49-55, April 1978.
  14. Ognisty, T.P. (1995). “Analyze Distillation Column Thermodynamics”, Chem. Eng. Prog., 91, 2, 40-46.
  15. Taprap, R. and Ishida, M (1996). “Graphic Exergy Analysis of Processes in Distillation Column by Energy-Utilization Diagrams”, AIChE J., 42, 6, 1633-1641.



DOI: https://doi.org/10.22146/ajche.50118

Article Metrics

Abstract views : 1210 | views : 899

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.