Ink-jet printing for Plasma-treated Cotton Fabric with Biomaterial

https://doi.org/10.22146/ajche.50037

C.W. Kan(1*), C.W.M. Yuen(2), W.Y. Tsoi(3), C.K. Chan(4)

(1) Institute of Textiles and Clothing, the Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
(2) Institute of Textiles and Clothing, the Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
(3) Institute of Textiles and Clothing, the Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
(4) Institute of Textiles and Clothing, the Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
(*) Corresponding Author

Abstract


Currently, sodium alginate is commonly used for preparing the printing medium for digital ink-jet printing due to its ready solubility and excellent stability even at high-temperature fixation treatments. Similar to sodium alginate, chitosan is also widely used as novel biomaterial. As a natural polymer, sodium alginate and chitosan are biocompatible, biodegradable and non-toxic. Therefore, chitosan may be used as a chemical for preparing printing medium for digital ink-jet printing for cotton fabric. Recently, low temperature plasma (LTP) treatment has proved to be an effective pretreatment method for the improving coating process by altering the surface properties of the material without much changing of the bulk properties. Thus, the aim of this study was to investigate the possibility of applying LTP treatment as pretreatment process to enhance the coating of printing medium, i.e. sodium alginate and sodium alginate/chitosan mixture, so as to improve the final properties of the digital ink-jet printed cotton fabric.

Keywords


low temperature plasma, cotton, surface, chitosan

Full Text:

PDF


References

  1. S. Gupta, Indian Journal of Fibre and Textile Research, 26(1-2) (2001) 156.
  2. M. van Parys, Melliand Texilberichte / International Textile Reports (English Edition) 83(6) (2002) E96.
  3. P.S.R. Choi, C.W.M. Yuen, S.K.A. Ku and C.W. Kan, Textile Asia, 35(2) (2005) 50.
  4. S.O. Aston, J.R. Provost and H. Masselink, Journal of Society of Dyers and Colourists, 109(4) (1993) 147.
  5. P.S.R. Choi, C.W.M. Yuen, S.K.A. Ku and C.W. Kan, Fibers and Polymers, 6(3) (2005) 229.
  6. R. Shishoo, Journal of Coated Fabrics 26(2) (1996) 87.
  7. S. Luo and W. van Ooij, Journal of Adhesion Science and Technology, 16(13) (2002) 1715.
  8. C.W.M. Yuen, S.K.A. Ku, P.S. Choi and C.W. Kan, Fibers and Polymers, 5(2) (2002) 117.
  9. C.W.M. Yuen, S.K.A. Ku, P.S. Choi and C.W. Kan, Textile Research Journal, 75 (2005) 319.



DOI: https://doi.org/10.22146/ajche.50037

Article Metrics

Abstract views : 1858 | views : 1380

Refbacks

  • There are currently no refbacks.


ASEAN Journal of Chemical Engineering  (print ISSN 1655-4418; online ISSN 2655-5409) is published by Chemical Engineering Department, Faculty of Engineering, Universitas Gadjah Mada.