Artikel penelitian
Vol 18 No 1 (2024): Volume 18, Number 1, 2024
Auditing approach at the finish mill to reduce energy consumption in cement production in indonesia
Teknik Kimia Universitas Jayabaya
P.T Indocement Tunggal Prakasa tbk., Jalan Mayor Oking Jayaatmaja, Citeureup Jawa Barat, Indonesia
Abstrak
Cement plants are substantial consumers of both thermal and electrical energy, with these energy expenditures accounting for over 40% of the overall production cost. A pivotal factor in this energy-intensive process is the clinker finish mill, a cornerstone of the cement industry. This study, therefore, centered its focus on a detailed examination of the performance of a tube-type finish mill equipped with two chambers and steel balls as the grinding medium. The methodology employed in this investigation included a comprehensive longitudinal test involving a series of meticulous steps to gauge and optimize the mill's performance. These steps encompassed steel ball sampling, the measurement of material levels within the mill, filling degree assessment, and sampling at one-meter intervals along the mill, with each sample weighing approximately 1 to 2 kilograms. This meticulous approach involved sampling during a period when the mill was operating steadily for at least 8 hours before a controlled shutdown, known as a "crash stop." The subsequent evaluation of the tube mill's performance extended to both its operation during the steady run and the crash stop. The findings stemming from this thorough audit are nothing short of remarkable. It is clear that the systematic evaluation conducted in this study led to a substantial enhancement in the production capacity of the finish mill, boasting an impressive 13.24% increase. Furthermore, the study also recorded a significant reduction in specific power consumption, effectively decreasing it by 3%. These outcomes not only underscore the vital importance of regular audits in cement grinding operations but also demonstrate the tangible benefits in terms of both increased production capacity and improved energy efficiency. Such improvements are not only pivotal for cost reduction but also contribute to the sustainability and competitiveness of cement production in an increasingly energy-conscious and cost-competitive industrial landscape
Referensi
Alsop PA. 2007. Cement plant operations handbook: For dry process plants. International Cement Review. Tradeship Publications. https://www.cementassociation.ir.
Atmaca A. 2023. Detailed assessment of specific exergetic costing, energy consumption, and environmental impacts of a rotary kiln in cement industry. Environmental Science and Pollution Research. 30(14):40260–40282. doi:10.1007/s11356-022-24882-w.
Bartholomew KM, Mcivor RE, Arafat O. 2018. A guide to maximising ball mill circuit classification system efficiency (CSE), for operators and equipment designers. 14th AusIMM Mill Operators’ Conference 2018. https://www. metcomtech.com/Articles/MetcomCSEPaper-MillOps 2018.pdf.
Cantini A, Leoni L, De Carlo F, Salvio M, Martini C, Martini F. 2021. Technological energy efficiency improvements in cement industries. Sustainability. 13(7):3810. doi:10.339 0/su13073810.
Chimwani N, Mulenga FK, Hildebrandt D. 2015. Ball size distribution for the maximum production of a narrowly-sized mill product. Powder Technology. 284:12–18. doi:10.1016/ j.powtec.2015.06.037.
Duda WH. 1985. Cement-data-book: International process engineering in the cement industry. Cement-data-book. Bauverlag. https://www.abebooks.com/9780828802048/Cement-Data-Book-Volume-International-0828802 041/plp.
Geng F, Gang L, Wang Y, Li Y, Yuan Z. 2016. Numerical investigation on particle mixing in a ball mill. Powder Technology. 292:64–73. doi:10.1016/j.powtec.2015.11.038.
Ghalandari V, Iranmanesh A. 2020. Energy and exergy analyses for a cement ball mill of a new generation cement plant and optimizing grinding process: A case study. Ad Huang YH, Chang YL, Fleiter T. 2016. A critical analysis of energy efficiency improvement potentials in Taiwan’s cement industry. Energy Policy. 96:14–26. doi:10.1016/j.en pol.2016.05.025.
K Sharma DM, Khurana A. 2020. The Changing Structure of the Cement Industry of India. American International Journal of Contemporary Research. 10(1). doi:10.30845/aijcr.v10n1p9.
Kim J, Shin S. 2023. Quantitative Verification of Concrete Formwork-Striking-Time Reduction by High Blaine Ordinary Portland Cement. Materials (Basel, Switzerland). 16(3):1077. doi:10.3390/ma16031077.
Leś KM, Opaliński I. 2023. Practical guidelines for predicting the proper conditions of high-energy mixing in a planetary ball mill towards powder flow improvement. Chemical and Process Engineering. doi:10.24425/cpe.2022.14 2283.
Li S, Niu L, Yue Q, Zhang T. 2022. Trajectory, driving forces, and mitigation potential of energy-related greenhouse gas (GHG) emissions in China’s primary aluminum industry. Energy. 239:122114. doi:10.1016/j.energy.2021. 122114.
Madlool NA, Saidur R, Hossain MS, Rahim NA. 2011. A critical review on energy use and savings in the cement industries. Renewable and Sustainable Energy Reviews. 15(4):2042–2060. doi:10.1016/j.rser.2011.01.005.
Nasim N, Nasim M. 2023. Greenhouse gas (GHG) emissions in Australian states and territories: Determinants and policy implications. PLOS Climate. 2(2):e0000091. doi: 10.1371/journal.pclm.0000091.
Nomura S. 2020. A scale-up and design basis of continuous tube mills in cement industries. Powder Technology. 363:717–734. doi:10.1016/j.powtec.2019.12.052.
Nomura S. 2022. Analysis of the ball mill grindability to improve the simplified grinding model. Powder Technology. 405:117551. doi:10.1016/j.powtec.2022.117551.
Pareek P, Sankhla VS. 2021. Review on vertical roller mill in cement industry & its performance parameters. Materials Today: Proceedings. 44:4621–4627. doi:10.1016/j.matp r.2020.10.916.
Paul MK. 2019. Conducting Internal Audit: Cement Industry. Research Bulletin. 44(4):12. doi:10.33516/rb.v44i4.12-74p. Rahman H, Maulana A. 2023. Toward green concrete: Replacing clinker with trass materials to produce portland pozzolan cement. Indian Journal of Environmental Protection. 43(5):452–458. https://www.e-ijep.co.in/43-5-452-458/.
Rahman H, Mulyani M. 2023. Improve the compressive strength using a strength improver agent (sia) in the cement industry in Indonesia. Jurnal Teknologi. 85(5):163–169. doi:10.11113/jurnalteknologi.v85.19629.
Rahman H, Rahayu PD. 2021. Characteristics of self compacting concrete (SCC) by the silica fume as portland cement substitute. Al-Kimia. 9(2). doi:10.24252/al-kimia.v9i2.21 064.
Rodriguez C, Tobon JI. 2020. Influence of calcined clay/limestone, sulfate and clinker proportions on cement performance. Construction and Building Materials. 251:119050. doi:10.1016/j.conbuildmat.2020.119050.
Santos AAdL, Machado ACG, Nascimento SM. 2022. Experimental study of clinker grinding in a ball mill and the behavior of the grinding media inside the equipment using DEM. Brazilian Journal of Chemical Engineering. 40(2):469–479. doi:10.1007/s43153-022-00261-3.
Sengul S, Koprucu Y, Yildiz H. 2023. A stochastic frontier analysis of cost of efficiency in Turkish cement industry. Pressacademia. doi:10.17261/pressacademia.2023.1738.
Tian L. 2023. The potential of green development and PM2.5 emission reduction for China’s cement industry. Atmosphere. 14(3):482. doi:10.3390/atmos14030482.
Virendra R, Kumar BSP, Babu JS, Kant DR. 2015. Detailed energy audit and conservation in a cement plant. International Research Journal of Engineering and Technology (IRJET). 2(1):248–256. www.irjet.net.
Yin Z, Peng Y, Zhu Z, Ma C, Yu Z, Wu G. 2019. Effect of mill speed and slurry filling on the charge dynamics by an instrumented ball. Advanced Powder Technology. 30(8):1611–1616. doi:10.1016/j.apt.2019.05.009.
