Skip to main navigation menu Skip to main content Skip to site footer
Page Header Logo

Research article

Vol 12 No 1 (2018): Volume 12, Number 1, 2018

Nilai parameter kadar pencemar sebagai penentu tingkat efektivitas tahapan pengolahan limbah cair industri batik lilin

DOI
https://doi.org/10.22146/jrekpros.35754
Submitted
November 16, 2023
Published
June 30, 2018

Abstract

Batik industry sector has a strategic role in development, especially to increase the level of employment and its contribution in encouraging the growth of creative economy. Along with the development of batik industry that has been known globally, batik industry produces a negative impact of liquid waste in a large amount which will potentially pollute the environment. This paper described the characteristics of batik industrial wastewater and its treatment stages both in physics, chemistry and biology. The treated wastewater is analyzed and adjusted to the required wastewater quality standard parameters. The wastewater treatment plant in Balai Besar Kerajinan dan Batik (BBKB) consist of physical process i.e. sedimentation, biological process i.e. anaerobic treatment and chemical process i.e. coagulation. The efficiency of the process is determined by the value of test results at each stage of wastewater treatment. The efficiency of physical, biological and chemical process in this plant were 71.69%; 55,31%; 40.75%, respectively. According to the results, the treated wastewater could be discharged safely to the environment.

References

  1. Boyd CE, 1990, Water quality in ponds for aquaculture, Auburn (AL): Alabama Agricultural Experiment Station, Auburn University.
  2. De Santo R.S., 1978, Concepts of applied ecology, Springer-Verlag, Heidelberg Science Library.
  3. Eskani I.N., Ivone De Carlo, Suleman, 2005, Efektifitas pengolahan air limbah dengan cara kimia dan biologi, Jurnal Dinamika Kerajinan dan Batik, 22, 16-27
  4. Haryadi S., 2004, BOD dan COD sebagai Parameter Pencemaran Air Dan Baku Mutu Air Limbah, Institut Pertanian Bogor (IPB), Bogor.
  5. Kurniawan M.W., Purwanto P., Sudarso S., 2013, Stratergi pengelolaan air limbah sentra UMKM batik yang berkelanjutan di kabupaten Sukoharjo, Jurnal Ilmu Lingkungan, 11(2),62-72.
  6. Manurung R., Hasibuan R., Irvan, 2004, Perombakan Zat Warna Azo secara Anaerob-aerob. Universitas Sumatera Utara, Medan.
  7. Muljadi, Muniarti T., 2013, Pengolahan limbah batik cetak dengan menggunakan metode filtrasi-elektrolisis untuk menentukan efisiensi penurunan parameter COD, BOD, dan logam berat (Cr) setelah perlakuan fisika-kimia, Ekuilibrium, 12 (1),27-36.
  8. Purwaningsih I., 2008, Pengolahan limbah cair industri batik CV. Batik Indah Raradjonggrang Yogyakarta dengan metode elektrokoagulasi ditinjau dari parameter Chemical Oxygen Demand (COD) dan Warna. Skripsi, Universitas Islam Indonesia, Yogyakarta.
  9. Rohasliney H., Subki N.S., 2011, A Preliminary Study on Batik Effluent in Kelantan State: A Water Quality Perspectiv. International Conference on Chemical, Biological, and Environment Science 2011, Bangkok, Thailand.
  10. Satrawijaya A. T., 2009, Pencemaran Lingkungan. Rineka Cipta, Jakarta
  11. Tjokrokusumo, 1998, Pengantar Teknik Lingkungan, Sekolah Tinggi Teknik Lingkungan, Yogyakarta.
  12. Umaly R.C., Cuvin M.L.A. 1988, Limnology: Laboratory and Field Guide, Physicochemical Factors, Biological Factors, Metro Manila, Manila.
  13. Wardhana W.A., 2004, Dampak Pencemaran Lingkungan, Andi Yogyakarta, Yogyakarta