Optimasi Lebar Celah Udara Generator Axial Magnet Permanen Putaran Rendah 1 Fase

  • Hari Prasetijo Universitas Jenderal Soedirman
  • Sugeng Waluyo Universitas Jenderal Soedirman
Keywords: Generator magnet permanen, FEMM 4.2, rapat fluks, tegangan, daya

Abstract

This study designs a 1-phase permanent magnet generator with double-sided axial coreless 10 stator poles to get optimum output voltage and power. Permanent magnet generator is chosen because it does not require a DC excitation current and the maintenance is relatively easy, so it has potential to be applied on a low head pico hydro power plant. The design uses NdFeb (Neodymium-Iron-Boron) type permanent magnet. The study was conducted by simulation to get the flux density in the stator coil using FEMM 4.2 applications. Simulation is done with the air gap width varies from 2 mm, 3 mm, 4 mm, and 5 mm. The depth of the magnet in the yoke varies from 0%, 5%, 10%, and 50% of the magnet thickness. Then, the flux density is used to estimate the output voltage and power of the generator. The results show that minimum output of 52.85 V and 195,56 VA is obtained at air gap distance of 5 mm and the depth of the magnet in yoke is 50%. Maximum output of 87,25 V and 322.84 VA is obtained at air gap distance of 2 mm and the depth of the magnet in yoke is 0% of the magnet thickness.

References

Gieras, Jacek F., Rong Jie-Wang, Maarten J Kamper.. Axial Flux Permanent Magnet Brushless Machine. Second edition. Springer.New York, 2008.

Irasari,P.,dkk, “Aplikasi Magnet Permanen Ba12Fe19O dan NdFeB Padaa Generator Magnet Permanen Putaran Rendah”. Jurnal Sains Material Indonesia,Vol 11 No 1 hal: 38-41.LIPI, 2007.

Arnold,D.P.,et al, “Design optimization of an 8W, microscale axial-flux, permanent-magnet generator”. Journal of Micromechanics and Microengineering S290–S296. 2006.

Nurtjahjomulyo,A.. “Rancang Bangun Generator Turbin Angin Tipe Aksial Kapasitas 200 W”. Jurnal Teknologi Dirgantara. 2010.

Bahtiar,G., Simulasi Optimasi Ketebalan Magnet Pada Rotor Magnet Permanen Fluks Radial. UI.Jakarta, 2012.

Ahmed,D., Ahmad, A., “An optimal design of coreless direct-drive axial flux permanent magnet generator for wind turbine”, 6th Vacuum and Surface Sciences Conference of Asia and Australia (VASSCAA-6), 2013.

Prasetijo, H., Prototipe Generator Magnet Permanen Axial AC 3 Fasa Sebagai Komponen Pembangkit Listrik Pico Hidro, Unsoed, Purwokerto, 2013.

How to Cite
Hari Prasetijo, & Sugeng Waluyo. (1). Optimasi Lebar Celah Udara Generator Axial Magnet Permanen Putaran Rendah 1 Fase. Jurnal Nasional Teknik Elektro Dan Teknologi Informasi, 4(4), 258-262. Retrieved from https://dev.journal.ugm.ac.id/v3/JNTETI/article/view/2984
Section
Articles