Monitoring Kontrol Greenhouse untuk Budidaya Tanaman Bunga Krisan dengan LabView

  • Sukandar Sawidin Politeknik Negeri Manado
  • Olga Engelin Melo Politeknik Negeri Manado
  • Tracy Marsela Politeknik Negeri Manado
Keywords: Mikrokontroler Arduino, LabView, TCP/IP dan RTC

Abstract

One of the plants that is cultivated in Tomohon City is Chrysanthemum. Nowadays, the cultivation of chrysanthemum in a greenhouse is still using the conventional method where farmers are difficult to manage the process of watering and light, therefore, the efflorescence of chrysanthemum plants is disturbed. Based on that case, a control system is created using a microcontroller Arduino to adjust the temperature, humidity, light, and watering of plants in the greenhouse, and to monitor the system in a PC using Labview and TCP/IP. The results show that the system has been running according to the plan. Based on the temperature control set point, the valve will be "on" to distribute water and reducing temperature until valve will be “off” when the temperature set point is reached. Moisture control is tested when the heater is “on” and distributes steam in the greenhouse. If humidity is detected lower than the set point value, the heater will be “off”. Light control testing begins since the seed is planted up to 10 weeks by controlling the lights at the night and setting the RTC (Real time clock) for 4 hours (09.00 pm to 01:00 am).

References

Badan Litbang Pertanian, Balai Penelitian Agroklimat dan Hidrologi, “Identifikasi dan Evaluasi Potensi Lahan Untuk Mendukung Prima Tani di Desa Kakaskasen Dua-Kec. Tomohon Utara, Kota Tomohon”,Dinas Pertanian Tanaman Pangan, Perkebunan, Peternakan dan Perikanan Kota Tomohon, Laporan Tahunan, 2007.

Dian A., “Interaksi Arduino dan LabVIEW”,Penerbit PT.Elex Media Komputindo, Jakarta, 2012.

Manish M., Gaurav T., Deepa C. and Atul A., Greenhouse Monitor and Control Using Wireless System Network,VSRD-IJEECE, Vol. 2 (6), pp. 337-345, 2012.

NI-Tutorial 8534, “Advantages of Using LabVIEW in Academic Research”, 2012.

NI-Tutorial 12879, “Top 5 Reasons LabVIEW Makes You More Productive When Using Arduino”,2011.

Tribowo I., “Perancangan dan Automatisasi Irigasi System Tetes Lahan”,2011.

How to Cite
Sukandar Sawidin, Olga Engelin Melo, & Tracy Marsela. (1). Monitoring Kontrol Greenhouse untuk Budidaya Tanaman Bunga Krisan dengan LabView. Jurnal Nasional Teknik Elektro Dan Teknologi Informasi, 4(4), 236-242. Retrieved from https://dev.journal.ugm.ac.id/v3/JNTETI/article/view/2981
Section
Articles