Pemodelan Fuzzy Logic Control untuk Pengendali PWM pada Buck Converter

  • Helmy Mukti Himawan Universitas Brawijaya
  • Onny Setyawati Universitas Brawijaya
  • Hadi Suyono Universitas Brawijaya
Keywords: Buck Converter, Fuzzy Logic Control, PWM, Arus, tegangan

Abstract

Recently the switching mode used in a buck converter is controlled by pulse width modulation (PWM) which has relatively higher efficiency compared to a linear power supply system. In general, there are two problems that often occur in the buck converter, First, the difficulties in controlling inductor current which has considerably large ripple, and second, a transient output voltage that appears at the start-up. By using fuzzy logic control in PWM switching mode, the inductor current and output voltage of the buck converter can be controlled. Using Mamdani method fuzzy logic with 2 inputs, i.e. Error and Change of Error, the system produces 1 output, which is duty ratio. The results showed that the fuzzy logic control decreased the error of the output voltage of buck converter by 3%, and decreased the ripple in the inductor current by 1.5% up to 3%.

References

Jha, A. K., Fernandes, B.G., Kishore, A., “A Single Phase Single Stage AC / DC Converter with High Input Power Factor and Tight Output Voltage Regulation, ”Progress in Electromagnetics Research Symposium Cambridge –USA,2006.

Ejury, J., “Buck Converter Design”, Infineon Technologies North America,2013.

Marcelo, D. P. Nascimento, C. B. Angelo, M. T. Mauricio, S., “Performance comparison between nonlinear and linear controllers with weighted adaptive kontrol applied to a Buck converter using poles placement design. Industrial Electronics (ISIE),”IEEE International Symposium. Pages: 1 -6, DOI: 10.1109/ISIE,2013.

Guo, L. Hung, J. Y. and Nelms, R. M., “Evaluation of DSP-based PID and Based fuzzy controllers for DC-DC converters,” IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 22370–2248,2009.

El Beid, S. Doubabi, S., “DSP-Based Implementation Of Fuzzy Output Tracking Kontrol For A Boost Converter,” IEEE Transactions On Industrial Electronics, VOL. 61, NO. 1,2014.

Kusumadewi, S. Purnomo, H.,“Aplikasi Logika Fuzzy untuk pendukung keputusan,” Jakarta: Graha Ilmu,2004.

Klir, G. J. dan Folger T. A., “Fuzzy Sets: Uncertainty and Information,”Prentice Hall International Inc, 2000.

Rasyid, M.,“Power Electronic 3rd edition,”Oxford: Elsevier Inc,2011.

Gowda, M., “Modelling of Buck DC-DC Converter Using Simulink,” International Journal of Innovative Research in Science, Mandya, Karnataka, India,2014.

Product family data sheet Cree® XLamp® XM-L LEDs, Cree. Inc,2015.

Ding, B., Luo, X., Wei, S.,“A survey on stability research of discrete-time Takagi-Sugeno fuzzy kontrol systems,”8th IEEE International Conference on Kontrol and Automation, 2010.

Gunterus, F., “Pengenalan Metode Ziegler-Nichols pada Perancangan Controller pada PID,” Jakarta : PT. Elex Media Komputindo,1994.

El Beid,S. Doubabi, S., “Self-scheduled fuzzy kontrol of PWM DC-DC converters,”in Proc. IEEE 18th Mediterranean Conf Control Autom,2010.

How to Cite
Helmy Mukti Himawan, Onny Setyawati, & Hadi Suyono. (1). Pemodelan Fuzzy Logic Control untuk Pengendali PWM pada Buck Converter. Jurnal Nasional Teknik Elektro Dan Teknologi Informasi, 5(1), 27-34. Retrieved from https://dev.journal.ugm.ac.id/v3/JNTETI/article/view/2967
Section
Articles