Performance Analysis of Per Connection Classifier and Failover on Multiple Gateway Internet Networks
Abstract
A good design for the internet network is needed to create a good internet network. The problem that often occurs is the availability of the internet network. A solution that can be applied to this problem is to implement Load Balancing and Failover. The network concept used was Load Balancing with the Per Connection Classifier method and Failover. Load Balancing is a technique used to optimally distribute traffic loads on a network with two or more connections. The method used was the Per Connection Classifier which could group connections. The Failover technique was also applied to the redundancy function. The test scenario would test the distribution of traffic loads, Failover testing, and comparative analysis of QoS with parameters jitter, packet loss, throughput, and delay on the performance of the system with Per Connection Classifier method based on Classifier Both Addresses, Both Ports, and Both Addresses and Ports. The results of the test show that the system is able to distribute the traffic, the system can create redundancy, while for overall QoS testing, Both Addresses gets better performance than other classifiers.
References
A.W. Irawan, A. Yusufianto, D. Agustina, dan R. Dean, “Laporan Survei Internet APJII 2018-2019,” Asosiasi Penyelenggara Jasa Internet Indonesia, Jakarta, Indonesia, Laporan Survei, 2019.
R. Dean, D. Agustina, dan A. Yusufianto, “Laporan Survei Internet APJII 2017-2018,” Asosiasi Penyelenggara Jasa Internet Indonesia, Jakarta, Indonesia, Laporan Survei, 2018.
A. Mustofa dan D. Ramayanti, “Implementasi Load Balancing dan Fail Over to Device Mikrotik Router Menggunakan Metode NTH,” J. Teknol. Inf. dan Ilmu Komput. (JTIIK), Vol. 7, No. 1, hal. 139-144, Feb. 2020.
I.P.Y. Paramarta, G.M. Sasmita, dan S.K. Wibawa, “Analisis dan Optimalisasi Jaringan Menggunakan Metode Per Connection Classifier,” J. Ilmiah Teknol. dan Komput., Vol. 1, No. 1, hal. 1-12, Agu. 2020.
W. Adhiwibowo dan A.R. Irawan, “Implementasi Redundant Link untuk Mengatasi Downtime dengan Metode Failover,” J. Pengemb. Rekayasa dan Teknol., Vol. 15, No. 1, hal. 48-53, Jun. 2019.
A. Budiman, M.F. Duskarnaen, dan H. Ajie, “Analisis Quality of Service (Qos) pada Jaringan Internet SMK 7 Jakarta,” J. Pend. Teknik Inf. dan Komput. (PINTER), Vol. 4, No. 2, hal. 1-5, Des. 2020.
G.T.P. Aji, C. Iswahjudi, dan J. Triyono, “Implementasi Teknik Load Balancing Metode Per Connection Classifier (PCC) dengan Fungsi QUEUE untuk Manajemen Bandwith,” J. Jarkom, Vol. 5, No. 2, hal. 1-10, Jun. 2018.
M. Badrul dan Akmaludin, “Implementasi Automatic Failover Menggunakan Router Mikrotik untuk Optimalisasi Jaringan,” J. Pengemb. Riset dan Observ. Sist. Komput., Vol. 6, No. 2, hal. 82-87, Sep. 2019.
D. Novianto dan E. Helmud, “Implementasi Failover dengan Metode Recursive Gateway Berbasis Router Mikrotik pada STMIK Atma Luhur Pangkalpinang,” J. Ilmiah Inf. Global, Vol. 10, No. 1, hal. 26-31, Jul. 2019.
P.R. Utami, “Analisis Perbandingan Quality of Service Jaringan Internet Berbasis Wirelles pada Layanan Internet Service Provider (ISP) Indihome dan First Media,” J. Ilmiah Teknol. dan Rekayasa, Vol. 25, No. 2, hal. 125-137, Agu. 2020.
A.C. Nurcahyo, E. Utami, dan S. Raharjo, “Analisis Perbandingan Simulasi Load Balance Menggunakan Metode ECMP dan PCC pada Penerapan Kongesti Manajemen Bandwith HTB,” J. Info.Interaktif, Vol. 4, No. 2, hal. 84-93, Mei 2019.
Dartono, Usanto, dan D. Irawan, “Penerapan Metode Per Connection Classifier (PCC) pada Perancangan Load Balancing dengan Router Mikrotik,” J. Elektro dan Inf. Swadharma (JEIS), Vol. 1, No. 1, hal. 14-20, Jan. 2021.
© Jurnal Nasional Teknik Elektro dan Teknologi Informasi, under the terms of the Creative Commons Attribution-ShareAlike 4.0 International License.
1.png)
