Modeling of the Drying Kinetics of Slurry Droplet in Spray Drying
Abstract
The detail analysis of the heat and mass transfer between the droplet containing suspended solids and the drying gas was carried out numerically. The temperature and moisture distributions within the slurry droplet were calculated during the first and second drying phases. The parametric study revealed that the droplet drying time decreases with increasing the drying gas temperature and decreasing the droplet diameter.
References
2. Crank, J. (1984). "Free and moving boundary problems," Oxford.
3. Elek, N., Hoffman, R., Raviv, U., Resh, R., Ishaaya, I., Magdassi, S. (2010). "Novaluron nanoparticles: Formation and potential use in controlling agricultural insect pests," Colloids Surf. A, 372, 66-72.
4. Dalmaz, N., Dzbelge H.O., Erasalan A.N., Uludag Y. (2007). “Heat and Mass Transfer mechanisms in drying of a suspension droplet : a new computational model,” Drying Technology, 25, 391 – 400.
5. Farid, M. (2003). "A new approach to modelling of single droplet drying," Chem. Eng. Sci., 58, 2985-2993.
6. Gharsallaoui, A., Roudauta, G., Chambina, O., Voilleya, A., Saurela, R. (2007). "Applications of spray-drying in microencapsulation of food ingredients: An overview," Food Research International, 40, 1107-1121.
7. Grigoriev, V.A., Zorin, V.M. (1988). "Thermal engineering handbook," Energoatomizdat, Moscow.
8. Kirillin, V.A., Sheindlin, A.E. (1956). "Thermodynamics of solutions," Energy, Moscow.
9. Masters, K. (1985). "Spray Drying Handbook," Longman Scientific and Technical.
10. Mezhericher, M., Levy, A., Borde, I. (2010). "Theoretical models of single droplet drying kinetics: a review," Drying Technology, 28, 278-293.
11. Nesic, S., Vodnik, J. (1991). "Kinetics of droplet evaporation," Chem. Eng. Sci., 46, 527-537.
12. Ochoa-Tapia, J.A., Stroeve, P., Whitaker, S. (1994). "Diffusive transport in two-phase media: spatially periodic models and Maxwell's theory for isotropic and anisotropic systems," Chem. Eng. Sci., 49, 709-726.
13. Okuyama, K., Abdullah, M., Lenggor, I.W., Iskandar, F. (2006). "Preparation of functional nanostructured particles by spray drying," Advanced Powder Technology, 17, 587-611.
14. Ranz, W.E., Marshall, W.R. (1952). "Evaporation from drops," Chem. Eng. Prog., 48, 141-146, 173-180.
15. Soottitantawat, A., Bigeard, F., Yoshii, H., Furuta, T., Ohgawara, M., Linko, P. (2005). "Influence of emulsion and powder size on the stability of encapsulated D-limonene by spray drying," Innovative Food Science and Emerging Technologies, 6, 107-114.
Copyright holder for articles is ASEAN Journal of Chemical Engineering. Articles published in ASEAN J. Chem. Eng. are distributed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) license.
Authors agree to transfer all copyright rights in and to the above work to the ASEAN Journal of Chemical Engineering Editorial Board so that the Editorial Board shall have the right to publish the work for non-profit use in any media or form. In return, authors retain: (1) all proprietary rights other than copyright; (2) re-use of all or part of the above paper in their other work; (3) right to reproduce or authorize others to reproduce the above paper for authors’ personal use or for company use if the source and the journal copyright notice is indicated, and if the reproduction is not made for the purpose of sale.