Ink-jet printing for Plasma-treated Cotton Fabric with Biomaterial

  • C.W. Kan Institute of Textiles and Clothing, the Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
  • C.W.M. yuen Institute of Textiles and Clothing, the Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
  • W.Y. Tsoi Institute of Textiles and Clothing, the Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
  • C.K. Chan Institute of Textiles and Clothing, the Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China
Keywords: low temperature plasma, cotton, surface, chitosan

Abstract

Currently, sodium alginate is commonly used for preparing the printing medium for digital ink-jet printing due to its ready solubility and excellent stability even at high-temperature fixation treatments. Similar to sodium alginate, chitosan is also widely used as novel biomaterial. As a natural polymer, sodium alginate and chitosan are biocompatible, biodegradable and non-toxic. Therefore, chitosan may be used as a chemical for preparing printing medium for digital ink-jet printing for cotton fabric. Recently, low temperature plasma (LTP) treatment has proved to be an effective pretreatment method for the improving coating process by altering the surface properties of the material without much changing of the bulk properties. Thus, the aim of this study was to investigate the possibility of applying LTP treatment as pretreatment process to enhance the coating of printing medium, i.e. sodium alginate and sodium alginate/chitosan mixture, so as to improve the final properties of the digital ink-jet printed cotton fabric.

References

1. S. Gupta, Indian Journal of Fibre and Textile Research, 26(1-2) (2001) 156.
2. M. van Parys, Melliand Texilberichte / International Textile Reports (English Edition) 83(6) (2002) E96.
3. P.S.R. Choi, C.W.M. Yuen, S.K.A. Ku and C.W. Kan, Textile Asia, 35(2) (2005) 50.
4. S.O. Aston, J.R. Provost and H. Masselink, Journal of Society of Dyers and Colourists, 109(4) (1993) 147.
5. P.S.R. Choi, C.W.M. Yuen, S.K.A. Ku and C.W. Kan, Fibers and Polymers, 6(3) (2005) 229.
6. R. Shishoo, Journal of Coated Fabrics 26(2) (1996) 87.
7. S. Luo and W. van Ooij, Journal of Adhesion Science and Technology, 16(13) (2002) 1715.
8. C.W.M. Yuen, S.K.A. Ku, P.S. Choi and C.W. Kan, Fibers and Polymers, 5(2) (2002) 117.
9. C.W.M. Yuen, S.K.A. Ku, P.S. Choi and C.W. Kan, Textile Research Journal, 75 (2005) 319.
Published
2011-12-31
How to Cite
Kan, C., yuen, C., Tsoi, W., & Chan, C. (2011). Ink-jet printing for Plasma-treated Cotton Fabric with Biomaterial. ASEAN Journal of Chemical Engineering, 11(1), 1-7. Retrieved from https://dev.journal.ugm.ac.id/v3/AJChE/article/view/8074
Section
Articles