Components Design of Cube Cutter for Fruit and Meat: Strength Analyses Under Static and Fatigue Conditions

https://doi.org/10.22146/jmdt.74251

Ryan Antonio(1), Dwiartha Pambudi Alif Sutrisno(2), Farid Triawan(3*)

(1) Department of Mechanical Engineering, Faculty of Engineering and Technology, Sampoerna University, Indonesia
(2) Department of Aerospace and Mechanical Engineering, The University of Arizona, Tucson, AZ, 85721, USA
(3) Department of Mechanical Engineering, Faculty of Engineering and Technology, Sampoerna University, Indonesia
(*) Corresponding Author

Abstract


Food preparation is one of the longest and the most time consuming part in cooking a food. In the preparation phase, the food ingredients are often needed to be cut into cube shape or stick shape. Besides that, most of the small food industry needs to serve a lot of customers while having limited number of workers, causing the workers to be tired even before the cooking process begin. For this reason, this paper proposes a design idea of a cutting tool that can cut food ingredients into cube and stick shape. This design is also completed with the strength analysis to evaluate the components’ safety for applied force of 50 N. Furthermore, the strength analysis was done by a theoretical approach of static and fatigue loading. According to the analysis, the cutting tool has a safety of more than 3.7 for static loading and 2.14 for fatigue loading. This paper is expected to be used as a reference to create a cutting tool that can help workers in Indonesia.


Keywords


Cutting tool; cube cutter; structural design; strength analysis; static and fatigue load

Full Text:

PDF


References

Alam, M. K., Mehdi, M., Urbanic, R. J., & Edrisy, A. (2020). Mechanical Behavior of Additive Manufactured AISI 420 Martensitic Stainless Steel. Materials Science and Engineering: A, 773, 138815. https://doi.org/10.1016/J.MSEA.2019.138815

American Welding Society Education. (2021). Ductile-to-Brittle Transition Temperature (DBTT). American Welding Society Education. https://awo.aws.org/glossary/ductile-to-brittle-transition-temperature-dbtt/

AZO Materials. (2001). Properties: Stainless Steel - Grade 304. AZO Materials. https://www.azom.com/properties.aspx?ArticleID=965

Banuta, M., & Tarquini, I. (2010). Premature Corrosion of Steak Knives Due to Extensive Precipitation of Chromium Carbides. Journal of Failure Analysis and Prevention 2010 10:6, 10(6), 458–462. https://doi.org/10.1007/S11668-010-9388-X

BOSCH. (2014). BOSCH MUZ5CC2 Cube cutter. BOSCH. https://www.bosch-home.com/ne/product-list/kitchen-machines/accessories-for-kitchen-machines/accessories-for-mum-5/MUZ5CC2#/Tabs=section-technicalspecs/Togglebox=manuals/

Brown, T., James, S. J., & Purnell, G. L. (2005). Cutting Forces in Foods: Experimental Measurements. Journal of Food Engineering, 70(2), 165–170. https://doi.org/10.1016/J.JFOODENG.2004.09.022

Budiman, B. A., Sambegoro, P. L., Rahardian, S., Ilhamsyah, R., Firmansyah, R., Juangsa, F. B., & Aziz, M. (2020). Prediction of The Remaining Service Lifetime of Inflatable rubber Dam With Deep Hole Damage. Indonesian Journal of Science and Technology, 5(3), 366–381. https://doi.org/10.17509/IJOST.V5I3.24936

Carlsson-Kanyama, A., & Faist, M. (2000). Energy Use in the Food Sector: A Data Survey. Department of Civil and Environmental Engineering Swiss Federal Institute of Technology.

GEFU. (2019). Cube and Stick Cutter TREPPO. GEFU. https://www.gefu.com/en/product-world/chopping/2033/cube-and-stick-cutter-treppo

Hardiyasanti, D. C., Widianingrum, S., Bestiara, F., Syaroh, M., & Triawan, F. (2021). A Structural Design of COVID-19 Patient Lifting Device Using Crane and Hydraulic Mechanism. Journal of Mechanical Design and Testing, 3(2), 133–147.

Huang, W., Zhang, Y., Dai, W., & Long, R. (2019). Mechanical Properties of 304 Austenite Stainless Steel Manufactured by Laser Metal Deposition. Materials Science and Engineering: A, 758, 60–70. https://doi.org/10.1016/J.MSEA.2019.04.108

Kementerian Koperasi dan UKM Republik Indonesia. (2019). Perkembangan Data Usaha Mikro, Kecil, Menengah (UMKM) dan Usaha Besar (UB) Tahun 2018 - 1019. Kementerian Koperasi Dan UKM Republik Indonesia. https://kemenkopukm.go.id/data-umkm

Ko, W. H., & Lu, M. Y. (2021). Developing A Professional Competence Scale for Kitchen Staff: Food Value and Availability for Surplus Food. International Journal of Hospitality Management, 95, 102926. https://doi.org/10.1016/J.IJHM.2021.102926

Liu, H., & Hu, Y. (2022). Welding. Encyclopedia of Materials: Metals and Alloys, 39–65. https://doi.org/10.1016/B978-0-12-819726-4.00143-5

Maharani, H., & Jaeni, J. (2021). Determinan Kebijakan Pemerintah Sebuah Solusi Keberlangsungan Usaha UMKM di Tengah Pandemi Covid-19. AKSES: Jurnal Ekonomi Dan Bisnis, 16(1). https://doi.org/10.31942/AKSES.V16I1.4469

Metals4U. (2019). 304 Stainless Steel Properties. Metals4U. https://www.metals4u.co.uk/blog/304-stainless-steel

Murray-Gibbons, R., & Gibbons, C. (2007). Occupational Stress In The Chef Profession. International Journal of Contemporary Hospitality Management, 19(1), 32–42. https://doi.org/10.1108/09596110710724143/FULL/XML

N’Diaye, A., Hariri, S., Pluvinage, G., & Azari, Z. (2009). Stress Concentration Factor Analysis for Welded, Notched Tubular T-Joints Under Combined Axial, Bending and Dynamic Loading. International Journal of Fatigue, 31(2), 367–374. https://doi.org/10.1016/J.IJFATIGUE.2008.07.014

Oktaviandri, M., & Kian, N. (n.d.). View of Design and Fabrication of Meat Shredder Machine Using VDI2221 Approach. Retrieved April 18, 2022, from https://ojs.sampoernauniversity.ac.id/index.php/IJOCED/article/view/150/122

Putra, W. D., & Iswanto, P. T. (2020). Analisis Kegagalan Poros Shipping Pump Pada Anjungan Produksi Minyak dan Gas Bumi Lepas Pantai. Journal of Mechanical Design and Testing, 2(2), 137–146. https://doi.org/10.22146/JMDT.56798

Shubhra, Q. T. H., Alam, A. K. M. M., & Quaiyyum, M. A. (2011). Mechanical Properties of Polypropylene Composites: A Review. Http://Dx.Doi.Org/10.1177/0892705711428659, 26(3), 362–391. https://doi.org/10.1177/0892705711428659

Starfrit. (2019). PRO Fry Cutter & Cuber. Starfrit. https://www.starfrit.com/us/pro-fry-cutter-cuber

Zulaikah, S., Rahmanda, W. H., & Triawan, F. (2020). Foldable Front Child-Seat Design for Scooter Motorcycle: Strength Analysis Under Static and Dynamic Loading. International Journal of Sustainable Transportation Technology, 3(2), 37–44. https://doi.org/10.31427/IJSTT.2020.3.2.1



DOI: https://doi.org/10.22146/jmdt.74251

Article Metrics

Abstract views : 414 | views : 184

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.