3 Dimensional Printing in Cardiology: Innovation for Modern Education and Clinical Implementation

https://doi.org/10.22146/aci.40855

Putrika Prastuti Ratna Gharini(1*), Herianto Herianto(2), Nur Arfian(3), Ferdinandus Bayu Satria(4), Nur Amin(5)

(1) Department of Cardiology and Vascular Medicine, Faculty of Medicine, Public Health and Nursing, Universitas Gadjah Mada-Dr.Sardjito General Hospital, Universitas Gadjah Mada Academic Hospital, Yogyakarta.
(2) Department of Electrical and Information Technology Engineering, Faculty of Engineering, Universitas Gadjah Mada, Yogyakarta.
(3) Department of Anatomy and Embryology, Faculty of Medicine, Public Health and Nursing, Universitas Gadjah Mada, Yogyakarta.
(4) Research Assistance, Universitas Gadjah Mada Academic Hospital, Yogyakarta
(5) Technician, Centra Teknologi Indonesia, PT
(*) Corresponding Author

Abstract


Medical uses of three-dimension (3D) printing have advantages for many importances, such as tissue and organ fabrication, creation of prosthetics, and model structural anatomy. Visualization of 3-dimensional structure of heart for the importance of examination, management or education is not fully comprehensive describe toward the complexity of anatomical structure and also toward the illustration of medical procedure. The aim of this study was to identify the potential application of heart’s 3D printing for the enhancement of case understanding for doctor, medical students or residents and also for patient and its family. A normal model of heart is used in this research to stimulate next 3D object in cardiology area.We retrieved data from patients’ CT scan performed in Gadjah Mada University Hospital, Yogyakarta from December 2017 to March 2018. Our focus is on normal heart anatomy. Data from CT scan results are exported into Digital Imaging and Communications format (DICOM), then dimension measurement and threshold segmentation are performed using Mimics Medical 20.0 (Materialise) application. Finally the file must be exported into STL format due to final process to cut the desirable parts using Mesh editing application. After the final model has been done, then it will be printed by fuse deposition method to make a 3D object.The making and implementing 3D printingof heart model has many advantages for medical education especially for the doctor, medical students or residents and also for the patient and its family to be more aware on the condition of the heart. This study may stimulate another trial of using this technique into several heart abnormalities


Keywords


heart anatomy; 3D printing; medical education

Full Text:

PDF


References

Rose A.S., Webster C.E., Harrysson O.L., Formeister E.J., Rawal R.B., Iseli C.E.2015. Pre-operative simulation of pediatric mastoid surgery with 3D printed temporal bone models. Int J Pediatr, Otorhinolaryngol, 79:740– 744.

Ventola C.L. 2014. Medical Applications for 3D printing: Current and Projected Uses. P&T a pee rreviewed. J Formul Manag, 39:704– 711.

Vukicevic M., Mosadegh B., Min J.K., Little S.H. 2017. Cardiac 3D printing and its future directions. JACC Cardiovasc Imaging, 10:171–184.

Garcia J., Yang Z., Mongrain R., Leask R.L., Lachapelle K. 2018. 3D printing materials and their use in medical education: a review of current technology and trends for the future. BMJ Simul Technol Enhanc Learn, 4:27-40.

Salentijn G.I.J., Oomen P.E., Grajewski M., Verpoorte E. 2017. Fused deposition modeling 3D printing for (bio)analytical device fabrication: procedures, materials, and applications. Anal Chem, 89:7053–7061.

Iliescu M., Tabeshfar K., Ighigeanu A., Dobrescu G. 2009. Importance of rapid prototyping to product design. UPB Sci Bull Ser D Mech Eng, 71:117–124.

Sun Z., Squelch, A. 2015. 3D printed models of complex anatomy in cardiovascular disease. Hear Res, 2:103–108.

Yoo S.J., Thabit O., Kim E.K., Ide H., Yim D., Dragulescu A. et al.2015. 3D printing in medicine of congenital heart diseases. 3D Print Med, 2:3.

Luo H., Meyer-Szary J., Wang Z., Sabiniewicz R., Liu Y. 2017. Three dimensional printing in cardiology: Current applications and future challenges. Cardiol J, 24:436–444.

Mitsouras D., Liacouras P., Imanzadeh A., Giannopoulos A.A., Cai T., Kumamaru K.K. et al.2015. Medical 3D printing for the radiologist. Radiographics, 35:1965–1988.

Costello J.P., Olivieri L.J., Su L., Krieger A., Alfares F., Thabit O. et al. 2015. Incorporating three dimensional printing into a simulation based congenital heart disease and critical care training curriculum for resident physicians. Congenit Heart Dis, 10:185190.

Greil G.F., Wolf I., Kuettner A., Fenchel M., Miller S., Martirosian P. et al.2007. Stereolithographic reproduction of complex cardiac morphology based on high spatial resolution imaging. Clin Res Cardiol, 96:176–185.

Chaowu Y., Hua L., Xin S. 2016. Images in cardiovascular medicine three-dimensional printing as an aid in transcatheter closure of secundum atrial septal defect. Circulation, 133:608–611.

Little S.H., Vukicevic M., Avenatti E., Ramchandani M., Barker C.M. 2016.3D printed modeling for patient specific mitral valve intervention repair with a clip and a plug. JACC Cardiovasc Interv, 9:973–975.

Jacobs S., Grunert R., Mohr F.W., Falk V. 2008. 3D-Imaging of cardiac structures using 3D heart models for planning in heart surgery: a preliminary study. Interact Cardiovasc Thorac Surg,7:6–9.

DengD., Jiao P., Ye X., Xia L. 2012. An image-based model of the whole human heart with detailed anatomical structure and fiber orientation. Comput Math Methods Med,2012:891070.

Nicholls M. 2017. Three-dimensional imaging and printing in Cardiology: Mark Nicholls reports on how threedimensional (3D) imaging and printing is helping to offer cardiologists a better understanding of arrhythmias. Eur. Heart J, 38:230–231.



DOI: https://doi.org/10.22146/aci.40855

Article Metrics

Abstract views : 4468 | views : 2214

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Putrika Prastuti Ratna Gharini, Herianto Herianto, Nur Arfian, Ferdinandus Bayu Satria, Nur Amin

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.



ACI (Acta Cardiologia Indonesiana) is indexed by: 

   

  

ACI (Acta Cardiologia Indonesiana) is published by:

Department of Cardiology and Vascular Medicine, Faculty of Medicine, Public Health and Nursing, Universitas Gadjah Mada, Yogyakarta, Indonesia

Address: Radiopoetro Building 2nd Floor, West Wing, Farmako Street, Sekip, Yogyakarta, Indonesia 55281

ACI (Acta Cardiologia Indonesiana) is endorsed by: