Digitalization of Human Head Anthropometry Measurement Using Pixels Measurement Method

https://doi.org/10.22146/ijitee.43698

Fandy Surya Pratama(1*), Istianah Muslim(2), Muhammad Ihsan Zul(3)

(1) Caltex Riau Polytechnic
(2) Caltex Riau Polytechnic
(3) Caltex Riau Polytechnic
(*) Corresponding Author

Abstract


Head Anthropometry is a part of anthropometry that needed to be measured carefully. It is because human head becomes an important part that necessary to be protected. The protection aims to look after the safety of the human head. Safety factors can be achieved by designing head products. Therefore, head anthropometry data is required to make a product design Currently, data retrieval of head anthropometry is still using several measuring devices such as anthropometers, sliding callipers, spreading callipers, and tape gauges. This measurement method makes the standard deviation become higher and also take a lot of time to capture huge amounts of anthropometry data. However, the problem has been resolved by other study research with building a head dimension measurement system using digital camera. But the system still need the integration with digital camera. This study uses the IP Camera that has been integrated with the system to capture human head from the front and side. The captured image is segmented into several areas based on head dimension. Then, the image is processed using pixel measurement method by performing feature extraction on each head dimension to get the result of head dimension measurement. The result shows that calliper measurement and system measurement against ten of fourteen human head anthropometry dimensions is identical with the best distance between IP Camera and the head as far as 200 cm. This head anthropometry data is expected to make a contribution to Indonesian Ergonomics Society.

Keywords


Head Anthropometry Dimension; IP Camera; Image Segmentation; Head Feature Extraction

Full Text:

PDF


References

I. Santoso, Interaksi Manusia dan Komputer, 2nd ed. Yogyakarta, Indonesia: ANDI, 2011.

S. Wignjosoebroto, "Evaluasi Ergonomis dalam Proses Perancangan Produk," presented as Keynote Speech at Seminar Nasional Ergonomi, Surabaya, 2000, pp. 1-7.

C.N. Rosyidi, N Riyanti, and I. Iftadi, "Head and Facial Anthropometry for Determining the Critical Glasses Frame Dimensions," Journal of Engineering Science and Technology, Vol. 11, No. 11, pp. 1620-1628, 2016.

Z. Zhuang and B. Bradtmiller, "Head-and-Face Anthropometric Survey of U.S. Respirator Users," Journal of Occupational and Enviromental Hygiene, Vol. 2, pp. 567-576, 2005.

B. Brennan, S. Wignjosoebroto, and A. Sudiarno, "Perancangan Sistem Pengukuran Antropometri Kepala Menggunakan Teknologi Image Processing dengan Metode Ekstraksi Fitur Wajah," Thesis, Institut Teknologi Sepuluh Nopember, Surabaya, Indonesia, 2009.

(2013) Pentingnya Antropometri, [Online], http://antropometriindonesia.org/index.php/detail/sub/2/7/4/pentingnya_antropometri, accessed: 14 May 2017.

R. Wiryadinata, U. Istiyah, R. Fahrizal, Priswanto, and S. Wardoyo, “Sistem Presensi Menggunakan Algoritme Eigenface dengan Deteksi Aksesoris dan Ekspresi Wajah,” Jurnal Nasional Teknik Elektro dan Teknologi Informasi (JNTETI), Vol. 6, No. 2, pp. 222-229, 2017.

S. Putra, I. Muslim, and M.I. Zul, "Identifikasi Aktifitas Manusia di dalam Ruangan Menggunakan IP Camera dengan Metode Template Matching dan Algoritma Klasifikasi," 4th Applied Business and Engineering Conference, 2016, pp. 1-5.

M.I. Zul, “Feature Extraction for Hand Shape Recognition by Using IP Camera,” Proc. of Regional Conference on Computer and Information Engineering, 2014, pp. 112-115.

N. Hayatin, “Pengelompokan Usia Berdasarkan Citra Wajah Menggunakan Algoritma Neural Network dengan Fitur Face Anthropometry dan dalam Kerutan,” Teknologi, Vol. 6, pp. 178-184, 2016.

A. Kadir and A. Susanto, Teori dan Aplikasi Pengolahan Citra, Yogyakarta, Indonesia: ANDI, 2013.

R. Munir, Pengolahan Citra Digital dengan Pendekatan Algoritmik, Bandung, Indonesia: Informatika, 2004.

S. Santoso, Buku Latihan SPSS Statistik Parametrik, Jakarta, Indonesia: PT Elex Media Komputindo, 2000.



DOI: https://doi.org/10.22146/ijitee.43698

Article Metrics

Abstract views : 3146 | views : 2097

Refbacks

  • There are currently no refbacks.




Copyright (c) 2019 IJITEE (International Journal of Information Technology and Electrical Engineering)

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

ISSN  : 2550-0554 (online)

Contact :

Department of Electrical engineering and Information Technology, Faculty of Engineering
Universitas Gadjah Mada

Jl. Grafika No 2 Kampus UGM Yogyakarta

+62 (274) 552305

Email : ijitee.ft@ugm.ac.id

----------------------------------------------------------------------------