Rancang Bangun Sistem Pengukuran Medan Magnet Menggunakan LabVIEW, CONTROLLER NI cRIO-9022, dan DTM-151 Digital Teslameter

https://doi.org/10.22146/ijeis.7637

Musaffiriyan Rasyid Ghoni(1*), Andi Dharmawan(2), Slamet Santosa(3)

(1) 
(2) Department of Computer Science and Electronics, Universitas Gadjah Mada
(3) Pusat Teknologi Akselerator dan Proses Bahan (PTAPB) BATAN, Yogyakarta
(*) Corresponding Author

Abstract


            Pusat Teknologi Akselerator dan Proses Bahan (PTAPB) BATAN Yogyakarta currently developing a magnetic field measurement system for cyclotron machine. Magnetic field measurement on cyclotron is required to determine the magnitude and direction of the magnetic field.

            The system used LabVIEW to create an interface application (HMI) and system programming. The control function implemented by using controller NI cRIO-9022 combined with NI 9512 module, which would controlling the motion component, that isthe  stepper motor. The acquisition data function implemented by using DTM-151 Digital Teslameter to measure the magnetic field. The measurement works within the cartesian coordinate plane (x,y).

            A permanent magnet was used as the measurement trial object. The size of the magnet was smaller than measurement dimension of the system therefore the  measurement dimension of the magnetic plane was made with the size of (100 x 100) mm. The initial position coordinate of the teslameter 1 and teslameter 2, respectively, set at (430,720) and (430,240). The trial was excuted 2 times (2 different magnet position). Each trial consist of 3 times measurement, so there’s 6 data file obtained. On those data file, there’s an average of 1.117 data on each file. The motor speed was set on 25 mm/s. The data reading speed was set on 10 data/s, which would caused a 2,5 mm interval on one single data.


Keywords


magnetic field measurement system, LabVIEW, controller, teslameter, stepper motor, on-off control methode, serial communication

Full Text:

PDF


References

[1] Prior, C.R., 2004, The Physics of Accelerators”, Rutherford Appleton Laboratory and Trinity College, Oxford.

[2] Bryant, P.J., 2008, “History And Applications Of Accelerators”, CAS Frascati.

[3] Aditya, A., 2011. “Simulasi Sistem Akuisisi dan Kendali Pengukuran Medan Magnet Menggunakan PLC T100MD1616+”, Skripsi, Jurusan Ilmu Komputer dan Elektronika FMIPA UGM, Yogyakarta.

[4] Yang, J., Liu, K., Qin, B., Li, D., Hu, T., Cao, L., Xiong, J., Xiong, Y., Yu, T., 2009, ”Magnetic Field Measurement System for Cychu-10”, Huangzhou University of Science and Technology, China.

[5] Park, K.H., Jung, Y.G., Kim, D.E., Kang, B.K., Yoon, M., Chai, J.S., Kim, Y.S., 2005, “Field mapping system for cyclotron magnet”, Pohang University of Science and Technology, Pohang.



DOI: https://doi.org/10.22146/ijeis.7637

Article Metrics

Abstract views : 2260 | views : 2064

Refbacks

  • There are currently no refbacks.




Copyright (c) 2015 IJEIS - Indonesian Journal of Electronics and Instrumentation Systems

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.



Copyright of :
IJEIS (Indonesian Journal of Electronics and Instrumentations Systems)
ISSN 2088-3714 (print); ISSN 2460-7681 (online)
is a scientific journal the results of Electronics
and Instrumentations Systems
A publication of IndoCEISS.
Gedung S1 Ruang 416 FMIPA UGM, Sekip Utara, Yogyakarta 55281
Fax: +62274 555133
email:ijeis.mipa@ugm.ac.id | http://jurnal.ugm.ac.id/ijeis



View My Stats1
View My Stats2