Desain dan Implementasi On-Board Computer/ On-Board Data Handling (OBDH) pada UGM-SAT

https://doi.org/10.22146/ijeis.7155

Bakhtiar Alldino Ardi Sumbodo(1*), Agfianto Eko Putra(2)

(1) Jurusan Ilmu Komputer dan Elektronika, FMIPA UGM, Yogyakarta
(2) Jurusan Ilmu Komputer dan Elektronika, FMIPA UGM, Yogyakarta
(*) Corresponding Author

Abstract


 The engineering model of OBDH for UGM-SAT was designed to control data handling program and tointerface the satellite subsystems to OBDH. The OBDHs based on the Microchip microcontroller PIC16F877A with 20 Mhz clock speed. The systems equipped with four external 24LC512 EEPROM’s with a storage capacity of 256 kB. The external memoriesre used to store housekeeping information. The systems equipped with a ACS712ELCTR-05B-T current sensor, voltage sensor and LM335Z temperature sensor. The accuracy of the measurements’re more than 99%. The systems also equipped with IC Real Time Clock (RTC) DS3232M with an internal clock of 32.768 Hz, whichs used to synchronize the time between OBDH with other subsystems.

The components of OBDH was chosen with industrial standards, small packages and low power. OBDHs designed to operate in environments with extreme temperature conditions. The communication with other subsystems was designed to use I2C-bus. Protocol data for communication between the satellite subsystems have been designed. A HammingCode(8,4) algorithm has been implemented to protect housekeeping information from being corrupted due to radiation. Error detection and correction speed is 1.800 byte/s. The engineering model of OBDH for UGM-SAT have met the standard specifications, and ready for further testing hardware and software.


Keywords


OBC/OBDH, Hamming Code(8,4) algorithm, error detection and correction, I2C

Full Text:

PDF


References

[1] Priyambodo, T. K., Putra, A. E., Asvial, M., Poetro, R.E., Hendrantoro, G., Pitowarno, E., Kuswadi, S., and Prabowo, G.S., 2012, Laporan Pelaksanaan Indonesian Inter University Satellite-1 (Iinusat-1), Yogyakarta : Koordinator Kegiatan Iinusat-1 Universitas Gadjah Mada.
[2] Philips Semiconductors, 2000, The I2C-Bus Specification Version 2.1, Eindhoven, The Netherlands : NXP Semiconductors Inc.
[3] Tjandra, Charles, 2011, Penuntun Layanan Pembuatan PCB, tanggal pembaharuan 11 Februari 2011, Bandung : Sumber Elektronik (SELC PCB).

[4] Haryono, 2009, On Board Data Handling (OBDH) for Small Satellite: Design and Implementation, Visakhapatnam, India : Andhra University.
[5] Moon, Todd K, 2005, Error Correction Coding, New Jersey: John Wiley & Sons, ISBN 978-0-471-64800-0.



DOI: https://doi.org/10.22146/ijeis.7155

Article Metrics

Abstract views : 2434 | views : 2360

Refbacks

  • There are currently no refbacks.




Copyright (c) 2015 IJEIS - Indonesian Journal of Electronics and Instrumentation Systems

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.



Copyright of :
IJEIS (Indonesian Journal of Electronics and Instrumentations Systems)
ISSN 2088-3714 (print); ISSN 2460-7681 (online)
is a scientific journal the results of Electronics
and Instrumentations Systems
A publication of IndoCEISS.
Gedung S1 Ruang 416 FMIPA UGM, Sekip Utara, Yogyakarta 55281
Fax: +62274 555133
email:ijeis.mipa@ugm.ac.id | http://jurnal.ugm.ac.id/ijeis



View My Stats1
View My Stats2