Purwarupa Mekanisme Akuisisi Data Rotary Vane Positive Displacement Flowmeter dengan Kompensasi Suhu

https://doi.org/10.22146/ijeis.4226

Ahmad Fajrul Falah(1*), Triyogatama Wahyu Widodo(2)

(1) 
(2) Jurusan Ilmu Komputer dan Elektronika, FMIPA UGM, Yogyakarta
(*) Corresponding Author

Abstract


Rotary vane positive displacement (PD) flowmeter termasuk dalam kategori flowmeter yang bekerja menggunakan prinsip operasi volumetric flow. Perubahan suhu pada fluida akan mengakibatkan perubahan pada volume fluida baik berupa penyusutan maupun pemuaian. Penelitian ini bertujuan untuk merancang dan mengimplementasikan purwarupa mekanisme akuisisi data rotary vane PD flowmeter dengan turut menyertakan suhu sebagai variabel kompensasi pengukuran.

Aliran fluida disimulasikan menggunakan motor DC yang memutar model chamber, sedangkan perubahan suhu lingkungan disimulasikan menggunakan elemen pemanas. Nilai suhu standar yang digunakan sebagai acuan adalah 15°C. Pengujian dilakukan dengan memberikan variasi nilai pengaturan koefisien muai 0,0007/°C dan 0,001/°C, kecepatan aliran 335 L/min, 506 L/min, dan 556 L/min, serta nilai pengaturan suhu 30°C, 35°C, 40°C, 45°C, dan 50°C.

Hasil percobaan didapatkan nilai kompensasi volume tertinggi adalah 65,854 liter sedangkan yang terendah adalah 10,530 liter. Pada nilai volume dan suhu yang sama, semakin tinggi nilai koefisien muai suatu fluida maka semakin tinggi pula nilai kompensasi yang diberikan demikian juga sebaliknya.

 

 

Kata kunci— Rotary Vane PD Flowmeter, Kompensasi Suhu, Koefisien Muai

 

 

Rotary vane positive displacement (PD) flowmeter is included in the category of flowmeter that works using the principle of volumetric flow operation. Changes in fluid temperature will result in changes in the volume of fluid in the form of shrinkage or expansion. This research aims to design and implement a prototype of rotary vane PD flowmeter data acquisition mechanism with also include measurement of temperature as a variable compensation.

Fluid flow is simulated using DC motors that rotate the chamber model, although changes in environmental temperature are simulated using a heating element. Temperature value is used as the reference standard is 15°C. Testing is done by providing a variety of setting value of expansion coefficient at 0,0007/°C and 0,001/°C, flow rate at 335 L/min, 506 L/min, dan 556 L/min, and also temperature setting value at 30°C, 35°C, 40°C, 45°C, and 50°C.

The results is the highest volume compensation value is 65,854 liters, while the lowest value is 10,530 liters. Meanwhile value of volume and temperature, the higher the coefficient of expansion of a fluid, the higher the value of the compensation given conversely.

 

KeywordsRotary Vane PD Flowmeter, Temperature Compensation, Coefficient of Expansion


Keywords


Rotary Vane PD Flowmeter, Temperature Compensation, Coefficient of Expansion

Full Text:

PDF


References

[1] Mei, K. 2012. Volume Correction Factor Calculation Development in American Petroleum Institute. Singapore: API Asia Conference and Expo.

[2] FMC Technologies. 1998. Smith Meter PD Meter Displacement Meters for Liquid Measurement Technical Paper. USA: FMC Measurement Solutions.

[3] The Engineering ToolBox Team.2013.Coefficients of Cubical Expansion of Liquids. http://www.engineeringtoolbox.com/cubical-expansion-coefficients-d_1262.html diakses pada tanggal 1 Januari 2013.

[4] Febrianto, T., Edi, S.S., dan Sunarno. 2013. Rancang Bangun Alat Uji Kelayakan Pelumas Kendaraan Bermotor Berbasis Mikrokontroler. Semarang: Universitas Negeri Semarang.

[5] Yudistira, J. 2011. Pengembangan Otomasi Sistem Penghitung Volume Kayu Balok Studi Kasus Pabrik Kayu. Surabaya: ITS.

[6] Kristiyanto, P. 2008. Sistem Telemetri Tinggi Muka Air Sungai Menggunakan Modem GSM Berbasis Mikrokontroler AVR AT-Mega 32. Semarang: Jurusan Teknik Elektro UNDIP.

[7] Khuriati, A., Sumariyah, dan Sarwoko, E.A.. 2005. Pengendalian Suhu Berbasis Pengendalian Hidup-Mati, P, PI, dan PID. Berkala Fisika Vol 8, No.3, pp. 79-86.



DOI: https://doi.org/10.22146/ijeis.4226

Article Metrics

Abstract views : 1602 | views : 1166

Refbacks

  • There are currently no refbacks.




Copyright (c) 2014 IJEIS - Indonesian Journal of Electronics and Instrumentation Systems

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.



Copyright of :
IJEIS (Indonesian Journal of Electronics and Instrumentations Systems)
ISSN 2088-3714 (print); ISSN 2460-7681 (online)
is a scientific journal the results of Electronics
and Instrumentations Systems
A publication of IndoCEISS.
Gedung S1 Ruang 416 FMIPA UGM, Sekip Utara, Yogyakarta 55281
Fax: +62274 555133
email:ijeis.mipa@ugm.ac.id | http://jurnal.ugm.ac.id/ijeis



View My Stats1
View My Stats2