Sistem Kendali Gimbal 2-Sumbu Sebagai Tempat Kamera Pada Quadrotor Menggunakan PID Fuzzy
M Saiful Haris(1), Andi Dharmawan(2*), Catur Atmaji(3)
(1) 
(2) Departemen Ilmu Komputer dan Elektronika, FMIPA UGM, Yogyakarta
(3) Departemen Ilmu Komputer dan Elektronika, FMIPA UGM, Yogyakarta
(*) Corresponding Author
Abstract
The function of camera gimbal control system that use in this research is to serves with the angle changes that occur due quadrotor maneuver. The PID control with tuning classical method has weakness, which is the PID variable not independently adjust to the environment, thus proposed using PID fuzzy control.
Gimbal camera used in this study has a mechanical design with two joint (pitch and roll) and the BLDC motor as actuator. The angle changes that occur in the pitch and roll axis will be a feedback system. Then, fuzzy logic will tune the PID variable based on that feedback.
Results of testing the system on 2-axis gimbal camera shows the PID fuzzy control generates better response in parameter risetime, overshoot, and settlingtime compared with PID control. Error input value range of [-30° 30°] and delta error of [-10° 10°] on the pitch and roll axes. The range of the output value for the pitch axis is, Kp at [40.2 46.2], Ki at [10.7 20.7], and Kd of [0.05 to 0.15]. The range of the output value for the roll axis is, Kp at [6.4 16.4], Ki at [17.3 to 27.3], and Kd at [0.08 0.16]. Speed response speed of pitch axis is 0.12 second and the roll axis is 1.07 seconds.
Keywords
Full Text:
PDFReferences
[1] Rajesh, R.J. and Kavitha, P., 2015, Camera gimbal stabilization using conventional PID controller and evolutionary algorithms, 2015 International Conference on Computer, Communication and Control (IC4), September 2015 IEEE., pp. 1–6.
[2] Ogata, K., 2010, Modern Control Engineering, Prentice Hall, New Jersey.
[3] Passino, K.M. and Yurkovich, S., 1998, Fuzzy Control, Addison Wesley Longman, Inc., California.
[4] Perwira, Z. Y., 2016, Implementasi Metode PID (Proportional Integral Derivative) Fuzzy pada Sistem Penerbangan Quadrotor untuk Penelusuran Lorong Berbelok, Tesis, Program Sarjana Elektronika dan Instrumentasi, Univ. Gadjah Mada, Yogyakarta.
[5] Abbasi, E. and Mahjoob, M., 2013, Controlling of Quadrotor UAV Using a Fuzzy System for Tuning the PID Gains in Hovering Mode, Tesis, School of Mechanical Engineering, University of Tehran.
[6] A. Dharmawan and R. Handoyo, “Sistem Stabilisasi Posisi Kamera pada Quadcopter,” IJEIS (Indonesian J. Electron. Instrum. Syst., vol. 2, no. 2, pp. 109–118, 2012 [Online]. Available: https://jurnal.ugm.ac.id/ijeis/article/view/2421. [Accessed: 21-Apr-2017]
[7] Rajesh, R.J. and Ananda, C.M., 2015, PSO tuned PID controller for controlling camera position in UAV using 2-axis gimbal, 2015 International Conference on Power and Advanced Control Engineering (ICPACE), August 2015 IEEE., pp. 128–133,
[8] Jazar, R.N., 2007, Theory of Applied Robotics, Springer US, New York.
[9] Kleuver, C.A., 2015, Dynamic System: Modeling, Simulation, and Control, Wiley.
[10] Hibbeler, R.C., 2016, Dynamics, Prentice Hall, New Jersey.
[11] Santos, M., López, V. and Morata, F., 2010, Intelligent fuzzy controller of a quadrotor, Proceedings of 2010 IEEE International Conference on Intelligent Systems and Knowledge Engineering, ISKE 2010, 141–146.
[12] Abdo, M., 2014, Modeling control and simulation of two axes gimbal seeker using fuzzy PID controller, The 22nd Iranian Conference on Electrical Engineering, (Icee), 1342–1347,
DOI: https://doi.org/10.22146/ijeis.24220
Article Metrics
Abstract views : 3014 | views : 3075Refbacks
- There are currently no refbacks.
Copyright (c) 2017 IJEIS (Indonesian Journal of Electronics and Instrumentation Systems)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
View My Stats1