Effect of Immobilization Method on the Growth of Chlorella vulgaris and Fatty Acid Profile for Biodiesel Production

https://doi.org/10.22146/ijc.39800

Nur Hanani Rushan(1), Nur Hidayah Mat Yasin(2*), Noor Raihana Abu Sepian(3), Farhan Mohd Said(4), Nurafifah Izzati Shafei(5)

(1) Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak 26300, Gambang, Pahang, Malaysia
(2) Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak 26300, Gambang, Pahang, Malaysia
(3) FFaculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak 26300, Gambang, Pahang, Malaysia
(4) Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak 26300, Gambang, Pahang, Malaysia
(5) Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak 26300, Gambang, Pahang, Malaysia
(*) Corresponding Author

Abstract


The aim of this research is to study the immobilization effect on growth cell of microalgae Chlorella vulgaris. The comparison of lipid production between immobilized microalgae and free cell culture was also studied and the fatty acid methyl ester for biodiesel production was identified in this research. Four important steps were done in this research which included microalgae cultivation, harvesting method by immobilization, lipid extraction and transesterification of oil. In the immobilization method, the combination of matrix system of sodium alginate and sodium carboxymethylcellulose (SA and CMC) gave the highest number of cells of microalgae after the 9th day of the cultivation process. However, the immobilized microalgae matrix system of SA at volumetric ratio of 0.3:1 showed better results for extraction of oil, attaining an oil yield percentage of 46% compared with other matrix systems studied; SA + CA + CMC (43.00%), SA + CA (41.19%), SA + CMC (40.38%) and free cell culture (42.57%). Furthermore, the fatty acids methyl ester profile of the extracted oil showed high potential for biodiesel production. The results proved that the immobilization of microalgae had improved the oil yield and fatty acid composition as compared to the free cell culture, which may have useful application for the biofuel industry.

Keywords


microalgae; Chlorella vulgaris; immobilized; fatty acids; lipids

Full Text:

Full Text PDF


References

[1] Onay, M., Sonmez, C., Oktem, H.A., and Yucel, M., 2016, Evaluation of various extraction techniques for efficient lipid recovery from thermo-resistant microalgae, Hindakia, Scenedesmus and Micractinium species – Comparison of lipid extraction methods from microalgae, Am J. Anal. Chem., 7 (2), 141–150.

[2] Singh, N.K., and Dhar, D.W., 2011, Microalgae as second generation biofuel. A review, Agron. Sustainable Dev., 31 (4), 605–629.

[3] Singh, M., Shukla, R., and Das, K., 2013, ”Harvesting of Microalgal Biomass” in Biotechnological Applications of Microalgae: Biodiesel and Value Added Products, 1st ed., Eds., Bux, F., CRC Press, USA, 77–87.

[4] Amin, S., 2009, Review on biofuel oil and gas production processes from microalgae, Energy Convers. Manage., 50 (7), 1834–1840.

[5] Brennan, L., and Owende, P., 2010, Biofuels from microalgae-A review of technologies for production, processing, and extractions of biofuels and co-products, Renewable Sustainable Energy Rev., 14 (2), 557–577.

[6] Moreno-Garrido, I., 2008, Microalgae immobilization: Current techniques and uses, Bioresour. Technol., 99 (10), 3949–3964.

[7] Priyadarshani, I., and Rath, B., 2012, Commercial and industrial applications of micro algae – A review, J. Algal Biomass Util., 3(4), 89–100.

[8] Griffiths, M.J., Dicks, R.G., Richardson, C., and Harrison, S.T.L., 2011, “Advantages and Challenges of Microalgae as a Source of Oil for Biodiesel” in Biodiesel - Feedstocks Processing Technologies, Eds., Stoytcheva M., and Montero, G., IntechOpen, 177–200.

[9] Månsson, S., 2012, Cultivation of Chlorella vulgaris in nutrient solution from greenhouse tomato production, Thesis, Department of Horticulture, Swedish University of Agricultural Sciences, 32.

[10] Barros, A.I., Gonçalves, A.L., Simões, M., and Pires, J.C.M., 2015, Harvesting techniques applied to microalgae: A review, Renewable Sustainable Energy Rev., 41, 1489–1500.

[11] Ramaraj, S., Hemaiswarya, S., Raja, R., Ganesan, V., Anbazhagan, C., Carvalho, I.S., and Juntawong, N., 2015, “Microalgae as an Attractive Source for Biofuel Production” in Environmental Sustainability - Role of Green Technologies, Eds., Thangavel, P., and Sridevi, G., Springer India, 129–157.

[12] Pittman, J.K., Dean, A.P., and Osundeko, O., 2011, The potential of sustainable algal biofuel production using wastewater resources, Bioresour. Technol., 102 (1), 17–25.

[13] Xu, L., Guo, C., Wang, F., Zheng, S., and Liu, C.Z., 2011, A simple and rapid harvesting method for microalgae by in situ magnetic separation, Bioresour Technol., 102 (21), 10047–10051.

[14] Singh, G., and Patidar, S.K., 2018, Microalgae harvesting techniques: A review, J. Environ. Manage., 217, 499–508.

[15] Ahmad, A.L., Yasin, N.H.M., Derek, C.J.C., and Lim, J.K., 2014, Comparison of harvesting methods for microalgae Chlorella sp. and its potential use as a biodiesel feedstock, Environ. Technol., 35 (17), 2244–2253.

[16] Al Hattab, M., Ghaly, A., and Hammoud, A., 2015, Microalgae harvesting methods for industrial production of biodiesel: Critical review and comparative analysis fundamentals of renewable energy and applications, J. Fundam. Renewable Energy Appl., 5 (2), 1000154.

[17] Lam, M.K., and Lee, K.T., 2012, Immobilization as a feasible method to simplify the separation of microalgae from water for biodiesel production, Chem. Eng. J., 191, 263–268.

[18] Krajewska, B., 2004, Application of chitin- and chitosan-based materials for enzyme immobilizations: A review, Enzyme Microb. Technol., 35 (2-3), 126–139.

[19] Moreno-Garrido, I., Campana, O., Lubián, L.M., and Blasco, J., 2005, Calcium alginate immobilized marine microalgae: Experiments on growth and short-term heavy metal accumulation, Mar. Pollut. Bull., 51 (8-12), 823–829.

[20] Arica, M.Y., 2000, Immobilization of polyphenol oxidase on carboxymethylcellulose hydrogel beads: Preparation and characterization, Polym. Int., 49 (7), 775–781.

[21] Hameed, M.S.A., and Ebrahim, O.H., 2007, Biotechnological potential uses of immobilized algae, Int. J. Agric. Biol., 9 (1), 183–192.

[22] Abu Sepian, N.R., Mat Yasin, N.H., Zainol, N., Rushan, N.H., Ahmad, A.L., 2019, Fatty acid profile from immobilised Chlorella vulgaris cells in different matrices, Environ. Technol., 40 (9), 1110–1117.

[23] Eroglu, E., Smith, S.M., and Raston, C.L., 2015, “Application of Various Immobilization Techniques for Algal Bioprocess” in Biomass and Biofuels from Microalgae. Biofuels and Biorefinery Technologies, Vol. 2, Eds., Moheimani, N., McHenry, M., de Boer, K., and Bahri, P., Springer, Cham, 19–44.

[24] Johnston, D., Kumar, P., Yahya, E., Toit, L.C., and Pillay, V., 2013, Modulation of the nano-tensile mechanical properties of co-blended amphiphilic alginate fibers as oradurable biomaterials for specialized biomedical application, J. Mech. Behav. Biomed. Mater., 23, 80–102.

[25] Kaparapu, J., and Rao, G.M.N., 2016, Applications of immobilized algae, J Algal Biomass Util., 7 (2), 122–128.

[26] Feng, Y., Li, C., and Zhang, D., 2011, Lipid production of Chlorella vulgaris cultured in artificial wastewater medium, Bioresour. Technol., 102 (1), 101–105.

[27] Griffiths, M.J., and Harrison, S.T.L., 2009, Lipid productivity as a key characteristic for choosing algal species for biodiesel production, J. Appl. Phycol., 21 (5), 493–507.

[28] Knothe, G., 2006, Analyzing biodiesel: Standards and other methods, J. Am. Oil Chem. Soc., 83 (10), 823–833.

[29] Knothe, G., 2005, Dependence of biodiesel fuel properties on the structure of fatty acid alkyl esters, Fuel Process. Technol., 86 (10), 1059–1070.

[30] Rashid, U., Anwar, F., Moser, B.R., and Knothe, G., 2008, Moringa oleifera oil: A possible source of biodiesel, Bioresour. Technol., 99 (17), 8175–8179.



DOI: https://doi.org/10.22146/ijc.39800

Article Metrics

Abstract views : 4258 | views : 3059


Copyright (c) 2019 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.