Coating of 2-Aminobenzimidiazole and 1-(o-Tolyl)biguanide Functionalized Silicas on Iron Sand Magnetic Material for Sorption of [AuCl4]–

https://doi.org/10.22146/ijc.34653

Nuryono Nuryono(1*), Nur Mutia Rosiati(2), Abraham L Rettob(3), Suyanta Suyanta(4), Yateman Arryanto(5)

(1) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(3) Faculty of Teachers Training and Education, Musamus University, Jl. Kamizaun Mopah Lama, Merauke 99600, Indonesia
(4) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(5) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281, Indonesia
(*) Corresponding Author

Abstract


Two novel materials of 2-aminobenzimidiazole (AB) and 1-(o-tolyl)biguanide (TB) modified silicas coated on the iron sand magnetic material (MM@SiO2/AB and MM@SiO2/TB) have been synthesized and were used to adsorb Au(III) from Au/Cu/Ni solution. Silica layering MM was modified with polyamino compounds via a sol-gel process using a sodium silicate solution, 3-chloropropyltrimethoxysilane (CPTS) and modifier compounds. Adsorption of Au(III) on MM@SiO2/AB and MM@SiO2/TB was investigated in a batch system by varying pH, initial concentration, contact time and the presence of other metal ions (Cu(II) and Ni(II)). The results showed that MM@SiO2/AB and MM@SiO2/TB were successfully synthesized through the sol-gel process using cross-linking agent CPTS. Adsorption of Au(III) on MM@SiO2/AB and MM@SiO2/TB decreased with the increase of pH and followed the Langmuir isotherm models with adsorption capacity of 17.15 and 9.44 mg/g, respectively. The adsorption kinetics fit to pseudo-second-order model with the rate constants of 1.16 × 10-2 and 1.46 × 10-2 g mg-1 min-1, respectively. MM@SiO2/AB and MM@SiO2/TB gave a high selectivity towards Au(III) in a mixture of Cu(II) and Ni(II). The desorption using thiourea 1 M solution in 1 M HCl of metal ions showed that percentage of Au(III) desorbed was higher than that of Cu(II) and Ni(II).

Full Text:

Full Text PDF


References

[1] Shabbir, S., Lee, Y., and Rhee, H., 2015, Au(III) catalyst supported on a thermoresponsive hydrogel and its application to the A-3 coupling reaction in water, J. Catal., 322, 104–108.

[2] Kim, E.Y., Kim, M.S., Lee, J.C., and Pandey, B.D., 2011, Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process, J. Hazard. Mater., 198, 206–215.

[3] Firlak, M., Yetimoğlu, E.K., and Kahraman, M.V., 2014, Adsorption of Au(III) ions from aqueous solutions by thiol-ene photoclick hydrogels and its application to electronic waste and geothermal water, J. Water Process Eng., 3, 105–116.

[4] Arshadi, M., and Mousavi, S.M., 2015, Enhancement of simultaneous gold and copper extraction from computer printed circuit boards using Bacillus megaterium, Bioresource Technol., 175, 315–324.

[5] Aguado, J., Arsuaga, J.M., Arencibia, A., Lindo, M., and Gascón, V., 2009, Aqueous heavy metals removal by adsorption on amine-functionalized mesoporous silica, J. Hazard. Mater., 163 (1), 213–221.

[6] Sakti, S.C.W., Narita, Y., Sasaki, T., Nuryono, and Tanaka, S., 2015, A novel pyridinium functionalized magnetic chitosan with pH-independent and rapid adsorption kinetics for magnetic separation of Cr(VI), J. Environ. Chem. Eng., 3 (3), 1953–1961.

[7] Behbahani, M., Najafi, F., Amini, M.M., Sadeghi, O., Bagheri, A., and Hassanlou, P.G., 2014, Solid phase extraction using nanoporous MCM-41 modified with 3,4-dihydroxybenzaldehyde for simultaneous preconcentration and removal of gold(III), palladium(II), copper(II) and silver(I), J. Ind. Eng. Chem., 20 (4), 2248–2255.

[8] Li, X., Zhang, C., Zhao, R., Lu, X., Xu, X., Jia, X., Wang, C., and Li, L., 2013, Efficient adsorption of gold ions from aqueous systems with thioamide-group chelating nanofiber membranes, Chem. Eng. J., 229, 420–428.

[9] Araghi, S.H., and Entezari, M.H., 2015, Amino-functionalized silica magnetite nanoparticles for the simultaneous removal of pollutants from aqueous solution, Appl. Surf. Sci., 333, 68–77.

[10] Fotoohi, B., and Mercier, L., 2015, Some insights into the chemistry of gold adsorption by thiol and amine functionalized mesoporous silica in simulated thiosulfate system, Hydrometallurgy, 156, 28–39.

[11] Sakti, S.C.W., Siswanta, D., and Nuryono, 2013, Adsorption of gold(III) on ionic imprinted amino-silica hybrid prepared from rice hull ash, Pure Appl. Chem., 85 (1), 211–223.

[12] Hastuti, S., Nuryono, and Kuncaka, A., 2015, L-Arginine-modified silica for adsorption of gold(III), Indones. J. Chem., 15 (2), 108–115.

[13] Ebrahimzadeh, H., Tavassoli, N., Amini, M.M., Fazaeli, Y., and Abedi, H., 2010, Determination of very low levels of gold and palladium in wastewater and soil samples by atomic absorption after preconcentration on modified MCM-48 and MCM-41 silica, Talanta, 81 (4-5), 1183–1188.

[14] Zhang, Y., Xu, Q., Zhang, S., Liu, J., Zhou, J., Xu, H., Xiao, H., and Li, J., 2013, Preparation of thiol-modified Fe3O4@SiO2 nanoparticles and their application for gold recovery from dilute solution, Sep. Purif. Technol., 116, 391–397.

[15] Alizadeh, A., Khodaei, M.M., Beygzadeh, M., Kordestani, D., and Feyzi, M., 2012, Biguanide-functionalized Fe3O4/SiO2 magnetic nanoparticles: An efficient heterogeneous organosuperbase catalyst for various organic transformations in aqueous media, Bull. Korean Chem. Soc., 33 (8), 2546–2552.

[16] Nuryono, N., Muliaty, E., Rusdiarso, B., Sakti, S.C.W., and Tanaka, S., 2014, Adsorption of Au(III), Cu(II) and Ni(II) on magnetite coated with mercapto groups modified rice hull ash silica, J. Ion Exch., 25 (4), 114–121.

[17] Nuryono, N., Rosiati, N.M., Rusdiarso, B., Sakti, S.C.W., and Tanaka, S., 2014, Coating of magnetite with mercapto modified rice hull ash silica in a one-pot process, SpringerPlus, 3, 515.

[18] Fahmiati, Nuryono, and Suyanta, 2017, Characteristics of iron sand magnetic material from Bugel beach, Kulon Progo, Yogyakarta, IOP Conf. Ser. Mater. Sci. Eng., 172 (1), 012020.

[19] Sui, D.P., Chen, H.X., Liu, L., Liu, M.X., Huang, C.C., Fan, H.T., 2016, Ion-imprinted silica adsorbent modified diffusive gradients in thin films technique: Tool for speciation analysis of free lead species, Talanta, 148, 285–291.

[20] Azmiyawati, C., Nuryono, and Narsito, 2014, Synthesis of disulfonato-silica hybrid from rice husk ash, JOMB, 3 (4), 301–305.

[21] Lin, Y.F., Chen, H.W., Chien, P.S., Chiou, C.S., and Liu, C.C., 2011, Application of bifunctional magnetic adsorbent to adsorb metal cations and anionic dyes in aqueous solution, J. Hazard. Mater., 185 (2-3), 1124–1130.

[22] Pacławski, K., and Fitzner, K., 2004, Kinetics of gold(III) chloride complex reduction using sulfur(IV), Metall. Mater. Trans. B, 35 (6), 1071–1085.

[23] Kraus, A., Jainae, K., Unob, F., and Sukpirom, N., 2009, Synthesis of MPTS-modified cobalt ferrite nanoparticles and their adsorption properties in relation to Au(III), J. Colloid Interface Sci., 338 (2), 359–365.



DOI: https://doi.org/10.22146/ijc.34653

Article Metrics

Abstract views : 3359 | views : 3038


Copyright (c) 2018 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.