Humic Acid Coated Fe3O4 Nanoparticle for Phenol Sorption

https://doi.org/10.22146/ijc.22545

Soerja Koesnarpadi(1*), Sri Juari Santosa(2), Dwi Siswanta(3), Bambang Rusdiarso(4)

(1) Student Department of Chemistry, Mathematics and Natural Sciences, Universitas Gadjah Mada 54123
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281
(3) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281
(4) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara, Yogyakarta 55281
(*) Corresponding Author

Abstract


The coating Fe3O4 using humic acid (HA) to form HA-coated Fe3O4 (Fe3O4/HA) was conducted and applied for phenol sorption. Fe3O4/HA was prepared using co-precipitation method in an alkaline condition using ammonium hydroxide and the addition of HA with mass ratios of Fe3O4 and HA=20:1, 10:1, 10:2, 10:3. The HA from peat soil in Sambutan village, East Kalimantan, Indonesia and was extracted in NaOH 0.1 M solution. The FT-IR characterization indicated that the coating of HA on the surface of Fe3O4 was successfully synthesized by forming a bond between the carboxylate group of HA and iron of Fe3O4. The coating of HA on the surface of Fe3O4 did not change the crystal structure of Fe3O4, but had lower peak intensities than Fe3O4 if added with HA with mass ratios 20:1, 10:1, 10:2, 10:3. The saturation magnetization of Fe3O4 decreased with the increased content of HA. SEM image indicated the magnetic particle size was almost homogenous by 10-18 nm. Iron and HA in Fe3O4/HA materials synthesized using different mass ratios were stable in pH range of 3.0-11.0 and 1.0–11.0, respectively. The phenol sorption on Fe3O4 was optimum at pH 5.0 and on Fe3O4/HA with mass ratios of 20:1, 10:1, 10:2, 10:3 were optimum at pH 5.0-6.0. The kinetics model for phenol adsorption on Fe3O4 and Fe3O4/HA with mass ratios of 20:1, 10:1, 10:2, 10:3 could be described using pseudo second-order equation and was in accordance with the Langmuir isotherm model with maximum adsorption capacity of 0.45 mmol/g for Fe3O4 and 0.55, 0.56, 0.58, 0.56 mmol/g respectively for Fe3O4/HA with mass ratios of 20:1, 10:1, 10:2, 10:3. The adsorption capacity increased with the increased content of HA, but the adsorption energy decreased except Fe3O4/HA with a mass ratio of 10:3. Generally, the performance of Fe3O4/HA materials was much higher than of bare Fe3O4.

Keywords


coating; humic acid; Fe3O4; adsorption; phenol

Full Text:

Full Text PDF


References

[1] Agency for Toxic Substances and Disease registry (ASTDR), 1998, Toxicological Profile for Phenol, NTIS report PB90-181249, Atlanta, Georgia, U.S, Department of Health and Human Service, Public health Service.

[2] Commission of the European, Urban Water Directive 91/271/EEC.

[3] Kujawski, W., Warszawski, A., Ratajczak, W., Porsbski, T., Capala, W., and Ostroeska, I., 2004, Removal of phenol from wastewater by different separation technique, Desalination, 163 (1-3), 287–296.

[4] Yang, C., Qian, Y., Zhang, L., and Feng, J., 2006, Solvent extraction process development and on site trial-plant for phenol removal from industrial coal-gasification waste water, Chem. Eng. J., 117 (2), 179–185.

[5] Ramos, A.F., Gómez, A., Hontoria, E., and González-López, J., 2007, Biological nitrogen and phenol removal from saline industrial waste water by submerged fixed-film reactor, J. Hazard. Mater., 142 (1-2), 175–183

[6] L’Amour, R.J.A., Azewedo, E.B., Liete, S.G.F., and Dezotti, M., 2008, Removal of phenol in high salinity media by a hybrid process (activated sludge + photocatalysis), Sep. Purif. Technol., 60 (2), 142–146

[7] Rosstaei, N., and Tezel, F.H., 2004, Removal of phenol from aqueous solution by adsorption, J. Environ. Manage., 70 (2), 157-164

[8] Bahdod, A., El Asri, S., Saoiabi, A., Coradin, T., and Laghzizil, A., 2009, Adsorption of phenol from an aqueous solution by selected apatite adsorbents: Kinetic process and impact of the surface properties, Water Res., 43 (2), 313–318.

[9] Thomas, W.J., and Crittenden, B., 1998, “The development of adsorption technology” in Adsorption Technology and Design, Elsevier, 1–7.

[10] Ambashta, R.D., and Sillanpää, M., 2010, Water purification using magnetic assistance: A review, J. Hazard. Mater., 180 (1-3), 38–49.

[11] Oh, J.K., and Park, J.M., 2011, Iron oxide-based superparamagnetic polymeric nanomaterials: Design, preparation, and biomedical application, Prog. Polym. Sci., 36 (1), 168–189.

[12] Chen, L., Wang, T., and Tong, J., 2011, Application of derivatized magnetic materials to the separation and the preconcentration of pollutants in water samples, Trends Anal. Chem., 30 (7), 1095–1108.

[13] Faraji, M., Yamini, Y., and Rezaee, M., 2010, Magnetic nanoparticles: Synthesis, stabilization, functionalization, characterization, and applications, J. Iran. Chem. Soc., 7 (1), 1–37.

[14] Wang, N., Zhu, L., Wang, D., Wang, M, Lin, Z., Tang, H., 2010, Sono-assisted preparation of highly-efficient peroxidase-like Fe3O4 magnetic nanoparticles for catalytic removal of organic pollutants with H2O2, Ultrason. Sonochem., 17 (3), 526–533.

[15] Petcharoen, K., and Sirivat, A., 2012, Synthesis and characterization of magnetite nanoparticles via the chemical co-precipitation method, Mater. Sci. Eng., B, 177 (5), 421–427.

[16] Maity, D., and Agrawal, C, 2007, Synthesis of iron oxide nanoparticles under oxidizing environment and their stabilization in aqueous and non-aqueous media, J. Magn. Magn. Mater., 308 (1), 46–55.

[17] Mak, S.Y., and Chen, D.H., 2004, Fast adsorption of methylene blue on polyacrylic acid-bound iron oxide magnetic nanoparticles, Dyes Pigm., 61 (1), 93–98.

[18] Chang, Y.C., Chang, S.W., and Chen, D.H., 2006, Magnetic chitosan nanoparticles: Studies on chitosan binding and adsorption of Co(II) ions, React. Funct. Polym., 66 (3), 335–341.

[19] Ngomsik, A.F., Bee, A., Siaugue, J.M., Cabuil, F., and Cote, G., 2006, Nickel adsorption by magnetic alginate microcapsules containing an extractant, Water Res., 40 (9), 1848–1856.

[20] Liu, J.F., Zhao, Z.S., and Jiang, G.B, (2008). Coating Fe3O4 magnetic nanoparticles with humic acid for high efficient removal of heavy metals in water, Environ. Sci. Technol., 42, 6949–6954.

[21] Tan, K.H., 1993, Principles of Soils Chemistry, 3rd Ed., Marcel Dekker Inc, New York.

[22] Stevenson, F.J., 1994, Humus Chemistry, 2nd Ed., John Wiley and Sons, New York.

[23] Santosa, S.J., Tanaka, S., Siswanta, D., Kunarti, E.S, Sudiono, S., and Rahmanto, W.H., 2007, Indonesian peat soil derived humic acids, it’s characterization, immobilization and performance as metal adsorbent, Proceeding of International Conference on Chemical Sciences (ICCS), Yogyakarta.

[24] Illés, E., and Tombácz, E., 2003, The role of variable surface charge and surface complexation in the adsorption of humic acid on magnetite, Colloids Surf., A, 203 (1-3), 99–109.

[25] Illés, E., and Tombácz, E., 2006, The effect of humic acid adsorption on pH-dependent surface charging and aggregation of magnetite nanoparticles, J. Colloid Interface Sci., 295 (1), 115–123

[26] Niu, H., Zhang, D., Zhang, S., Zhang, X., Meng, Z., and Cai, Y., 2011, Humic acid coated Fe3O4 magnetic nanoparticles as highly efficient Fenton-like catalyst for complete mineralization of sulfathiazole, J. Hazard Mater., 190 (1-3), 559–565.

[27] Peng, L., Qin, P., Lei, M., Zeng, Q., Song, H., Yang, J., Shao, J., Liao, B., and Gu, J., 2012, Modifying Fe3O4 nanoparticles with humic acid for removal of Rhodamine B in water, J. Hazard. Mater., 209-210, 193–198.

[28] Zhang, X., Zhang, P., Wu, Z., Zhang, L., Zeng, G., and Zhou, C., 2013, Adsorption of methylene blue onto humic acid-coated Fe3O4 nanoparticles, Colloids Surf., A, 435, 85–90.

[29] Tombácz, E., Horvát, M., and Illés, E., 2006, Magnetite in aqueous medium: coating its surface and surface coated with it, Rom. Rep. Phys., 58 (3), 281–286.

[30] Carlos, L., Cipollone, M., Soria, D.B., Moreno, M.S., Ogilby, P.R., Einschlag, F.S.G., and Martire, D.O., 2012, The Effect of Humic Acids Binding to Magnetite Nanoparticles on The Photodegradations of Reactive Oxygen Species, Sep. Purif. Technol., 91, 23–29.

[31] Wu, S., Sun, A., Zhai, F., Wang, J., Xu, W., Zhang, Q., and Volinsky, A.A, 2011, Fe3O4 magnetic nanoparticles synthesis from tailings by ultrasonic chemical co-precipitation, Mater. Lett., 65 (12), 1882–1884.

[32] Janos, P., Kormunda, M., Novak, F., Zivotsky, O., Fuitova, J., and Pilarova, E., 2013, Multifunctional humate-based magnetic sorbent: Preparation, properties and sorption of Cu(II), phosphates and selected pesticides, React. Funct. Polym., 73 (1), 46–52.

[33] Koesnarpadi, S., Santosa, S.J., Siswanta, D., and Rusdiarso, B., 2015, Synthesis and characterization of magnetite nanoparticle coated humic acid (Fe3O4/HA), Procedia Environ. Sci., 30, 103–108.

[34] Laurent, S., Forge, D. Port, M. Roch, A. Robic, C. Vander Elst, M., Muller, R.N., 2008, Magnetic iron oxide nanoparticles: Synthesis, stabilization, vectorization, physicochemical characterizations, and biological applications, Chem. Rev., 108 (6), 2064–2110.

[35] Environmental Protection Agency, 1978, Method 4.301 Phenolics, (Spectrophotometric, manual 4AAP with distillation).

[36] Ingole, R.S., Lataye, D.H., Dhorabe, P.T., 2016, Adsorption of phenol onto banana peels activated carbon, KSCE J. Civ. Eng., 21 (1), 100–110.

[37] Kyzas, G.Z. and Matis, K.A., 2015, Nanoadsorbents for pollutants removal: A review, J. Mol. Liq., 203, 159–168.

[38] Ho, Y.S., and Mckay, G., 1999, Pseudo-second order model for sorption processes, Process Biochem., 34 (5), 451–465.

[39] Santosa, S.J., 2014, Sorption kinetics of Cd(II) species on humic acid-based sorbent, CLEAN Soil Air Water, 42, 760–766.

[40] Ahmazurahman, M., 2008, Adsorption of phenolic compounds on low-cost adsorbents: A review, Adv. Colloid Interface Sci., 143 (1-2), 48–67.

[41] Ahmazurahman, M., and Sharma, D.K., 2005, Adsorption of phenols from wastewater, J. Colloid Interface Sci., 287 (1), 14–24.



DOI: https://doi.org/10.22146/ijc.22545

Article Metrics

Abstract views : 4097 | views : 3479


Copyright (c) 2017 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.