CHARACTERIZATION OF MODIFIED BENTONITE USING ALUMINUM POLYCATION

https://doi.org/10.22146/ijc.21913

Hery Haerudin(1*), Nino Rinaldi(2), Adel Fisli(3)

(1) Pusat Penelitian Kimia - LIPI, Kawasan Puspiptek, Serpong, Tangerang, Banten
(2) Pusat Penelitian Kimia - LIPI, Kawasan Puspiptek, Serpong, Tangerang, Banten
(3) Puslitbang Iptek Bahan (P3IB)-BATAN, Kawasan Puspiptek, Serpong, Tangerang, Banten
(*) Corresponding Author

Abstract


The modification of bentonite by pillarization using aluminum polycation type Keggin [Al13O4(OH)24(H2O)12]7+ has been carried out, by exchange of cation from interlayer with aluminum polycation. The amount of aluminum polycation, which was used for the pillaring of bentonite was varied, i.e. 5 mmol/gram, 10 mmol/gram, and 20 mmol/gram of bentonite. After drying, the pillared bentonite was calcined at 400 oC for 6 hour with temperature rate of 5 oC/min. The cationic exchange capacity (CEC) of starting bentonite was 98.3 meq/100 gram. The concentration ratio of Al/Si increased from 0.27 to 0.34 for pillared bentonite and of Ca/Si was decreased from 0.06 to 0.006 for pillared bentonite. The basal space for pillared bentonit increased significantly from 7.30 Å to about 18 Å . The measured specific surface area (by BET) of pillared bentonite was also increased significantly from 46 m2/g to about 162 m2/g. It was concluded that bentonite has been pillared by aluminum polication successfully.


Keywords


aluminum polycation; bentonite

Full Text:

Full Text PDF


References

[1] Vaccari, A., Catal. Today, 41, 53-71, 1998.

[2] Kirk-Othmer, Encyclopedia of Chemical Technology, 4th ed. Vol.6, John Wiley & Sons, New York, 1993.

[3] Gandia, L.M., Vicente, M.A. and Gil, A., Appl. Catal. A: General, 196, 281-292, 2000.

[4] Hutson, N.D., Hoekstra, M.J. and Yang, R.T., Micropor. Mesopor. Mter., 28, 447-459, 1999.

[5] Rytwo, G., Serban, C., Nir, R. and Margulies, L., Clays Clay Mineral, 29, 551-555, 1991.

[6] Gil, A., Vicente M.A. and Gandia, L.M., Micropor. Mesopor. Mater., 34, 115-125, 2000

[7] Canizares, P., Valverde, J.L., Sun kou, M.R. and Molina, C.B., Micropor. Mesopor. Mater., 29, 267-281, 1999.

[8] Dyer, A., Gallordo, T. and Roberts, C.W., Preparation and properties of Clays Pillered with Zirconium and their use in HPLC Seperations”, (Zeolites: Facts, Figures, Future, edited by P.A. Jacobs and R.A. Vab Santes), pp 389-398, Elsevier Science Publishers, Amsterdam, 1989.



DOI: https://doi.org/10.22146/ijc.21913

Article Metrics

Abstract views : 1383 | views : 2272


Copyright (c) 2010 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.