ACTIVATED CARBON FROM DURIAN SEED BY H3PO4 ACTIVATION: PREPARATION AND PORE STRUCTURE CHARACTERIZATION

https://doi.org/10.22146/ijc.21495

Amri Ismail(1*), Hanggara Sudrajat(2), Desi Jumbianti(3)

(1) Department of Chemical Engineering, Faculty of Engineering, Malikussaleh University, Lancang Garam, Lhokseumawe 24351
(2) Graduate Student, Department of Chemical Engineering, Faculty of Engineering, Universitas Gadjah Mada, Yogyakarta 55281
(3) Biomolecular Engineering Research Institute, 6-2-3 Furuedai, Suita 565-0874
(*) Corresponding Author

Abstract


Activated carbons have been produced from the natural biomaterial durian (Durio zibethinus) seed, using phosphoric acid (H3PO4) as the activating agent. The effects of impregnation ratio, activation temperature, heating rate on the carbon surface area, porosity and mass yield are presented. A two step process has been used, the first step was a low temperature impregnation at 150 °C using phosphoric acid and the second step was the carbonization at high temperatures, namely, 600 and 900 °C. The most outstanding carbon with the highest surface area of 2123 m2/g was prepared using an impregnation ratio of 2, an activation temperature of 600 °C for 4 h and a heating rate of 1 °C/min.


Keywords


activated carbon; durian seed; phosphoric acid activation

Full Text:

Full Text Pdf


References

[1] Do, D.D., 1998, Adsorption Analysis: Equilibria and Kinetics, Imperial College Press, London, UK.

[2] Hu, Z., and Srinivasan, M.P., 1999, Microporous Mesoporous Mater., 27, 11-18.

[3] Stavropoulos, G.G. and Zabaniotou, A.A., 2005, Microporous Mesoporous Mater., 83, 79-85.

[4] Mozammel, H.M., Masahiro, O., and Bhattacharya, S.C., 2002, Biomass Bioenergy, 22, 397-400.

[5] Puziy, A.M., and Poddubnaya, O.I., 2005, Carbon, 43, 2857-2868.

[6] Hu, Z., Srinivasan, M.P., and Ni, Y., 2001, Carbon, 39, 877-886.

[7] Kaneko, K., 1994, J. Membr. Sci., 96, 59-89.

[8] El-Hendawy, A.N.A., 2003, Carbon, 41, 713-722.

[9] Mudoga, H.L., Yucel, H., and Kincal, N.S., 2008, Bioresour. Technol., 99, 3528-3533.

[10] Adinata, D., Daud, W.M.A.W., and Aroua, M.K., 2007, Bioresour. Technol., 98, 145-149.

[11] Suzuki, R.M., Andrade, A.D., Sousa, J.C., and Rollemberg, M.C., 2007, Bioresour. Technol., 98, 1985-1991.

[12] Rouquerol, F., Rouqueol, J., and Sing, K., 1999, Adsorption by Powders and Porous Solids, Academic Press, London, UK.

[13] Guo, Y., and Rockstraw, D.A., 2007, Bioresour. Technol., 98, 1513-1521.

[14] Sudaryanto, Y., Hartono, S.B., Irawaty, W., Hindarso, H., and Ismadji, S., 2006, Bioresour. Technol., 97, 734–739.

[15] Mizuta, K., Matsumoto, T., Hatate, Y., Nishihara, K., and Nakanishi, T., 2004, Bioresour. Technol., 95, 255-257.

[16] Wu, F.C., Tseng, R.L., and Juang, R.S., 1999, J. Environ. Sci. Health A, 34, 1753-1775.

[17] Kim, Y.J., Lee, B.J., Suezaki, H., Chino, T., Abe, Y., Yanagiura, T., Park, K.C., and Endo, M., 2006, Carbon, 44, 1592-1595.



DOI: https://doi.org/10.22146/ijc.21495

Article Metrics

Abstract views : 2378 | views : 4813


Copyright (c) 2010 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.