Chemical and Physical Properties of Cassava Starch–CM-Chitosan–Acrylic Acid Gel Copolymerization by Gamma Irradiation

https://doi.org/10.22146/ijc.21265

Gatot Trimulyadi Rekso(1*)

(1) Center for Application of Isotopes and Radiation, National Nuclear Energy Agency, Jl. Cinere, Pasar Jumat PO Box 7002 JKSL Jakarta 12070
(*) Corresponding Author

Abstract


Starch is a renewable natural polymer that can be decomposed easily in the environment and can be modified to various applications such as biomedical, agricultural and pharmaceutical applications. Copolymerization of gelatinized starch–CM-chitosan and acrylic acid (AAc) in aqueous medium using γ-irradiation was carried out. The preparation conditions, such as irradiation dose and AAc concentration were investigated. The copolymers were characterized by FTIR spectroscopy, thermo-gravimetric analysis (TGA) and scanning electron microscopy (SEM). The results show that by increasing of irradiation dose the gel fraction increases till the dose of 15 kGy. Above the stating dose the gel fraction decreases. The Equilibrium Degree of Swelling (EDS) value slightly increases with increasing irradiation dose and after dose of 15 kGy is decreasing. The swelling of starch–CM-chitosan–AAc hydro gels reduced as the gel content increases. The results indicated that the optimum condition for obtaining hydro gels with desirable properties was irradiated at dose of 15 kGy. The results indicated that SEM revealed that the higher the dose, the lower the copolymer pore size. The starch–CM-chitosan–AAc copolymers have thermal stability higher than that for starch individually.

Keywords


cassava starch; chitosan; acrylic acid; radiation copolymerization

Full Text:

Full Text PDF


References

[1] Abad, L.V., Relleve, L.S., Aranilla, C.T., and Dela Rosa, A.M., 2003, Radiat. Phys. Chem., 68 (5), 901–908.

[2] Park, K.R., and Nho, Y.C., 2003, Radiat. Phys. Chem., 67 (3-4), 361–365.

[3] Wach, R.A., Mitomo, H., Nagasawa, N., and Yoshii, F., 2003, Radiat. Phys. Chem., 68 (5), 771–779.

[4] Yoshii, F., Zhao, L., Wach, R.A., Nagasawa, N., Mitomo, H., and Kume, T., 2003, Nucl. Instrum. Methods Phys., Res., Sect. B, 208, 320–324.

[5] Wu, G., Long, D., Chen, S., and Yao, S., 2005, Carbohydr. Polym., 60 (1), 61–65.

[6] Chen, P., Zhang, W., Luo, W., and Fang, Y., 2004, J. Appl. Polym. Sci., 93 (4), 1748–1755.

[7] Dafader, N.C., Haque, M.E., Akhtar, F., and Ahmad, M.U., 2006, Radiat. Phys. Chem., 75 (1), 168–172.

[8] Fei, B., Wach, R.A., Mitomo, H., Yoshii, F., and Kume, T., 2000, J. Appl. Polym. Sci., 78 (2), 278–283.

[9] Wasikiewicz, J.M., Yoshii, F., Nagasawa, N., Wach, R.A., and Mitomo, H., 2005, Radiat. Phys. Chem., 73 (5), 287–295.

[10] Wasikiewicz, J.M., Mitomo, H., Nagasawa, N., Yagi, T., Tamada, M., and Yoshii, F., 2006, J. Appl. Polym. Sci., 102 (1), 758–767.

[11] Zhai, M., Yoshii, F., and Kume, T., 2003, Carbohydr. Polym., 52 (3), 311–317.

[12] Nagasawa, N., Yagi, T., Kume, T., and Yoshii, F., 2004, Carbohydr. Polym., 58 (2), 109–113.

[13] Zhang, J., Wang, Q., and Wang, A., 2007, Carbohydr. Polym., 68 (2), 367–374.

[14] Saraydin, D., Karadag, E., Işikver, Y., Şahiner, N., and Güven, O., 2004, J. Macromol. Sci. Part A Pure Appl. Chem., 41 (4), 419–431.

[15] Zhan, F., Liu, M., Guo, M., and Wu, L., 2004, J. Appl. Polym. Sci., 92 (5), 3417–3421.

[16] Zhou, B., 2003, J. Chem. Fert. Ind., 30, 55–56.

[17] He, X.S., and Zhang, F.D., 2005, Plant Nutr. Fert. Sci., 11, 334–339.



DOI: https://doi.org/10.22146/ijc.21265

Article Metrics

Abstract views : 3371 | views : 2840


Copyright (c) 2014 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 

Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web Analytics View The Statistics of Indones. J. Chem.