L-Arginine-Modified Silica for Adsorption of Gold(III)

https://doi.org/10.22146/ijc.21203

Sri Hastuti(1*), Nuryono Nuryono(2), Agus Kuncaka(3)

(1) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Sebelas Maret University, Jl. Ir. Sutami 36 A Kentingan, Surakarta 57126
(2) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara PO BOX BLS 21 Yogyakarta 55281
(3) Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Gadjah Mada, Sekip Utara PO BOX BLS 21 Yogyakarta 55281
(*) Corresponding Author

Abstract


In this research, L-arginine-modified silica (SiO2-Arg) with 3-glycidoxypropyl-trimethoxysilane (GPTMS) as the linking agent has been synthesized through sol gel process for adsorption of Au(III) in aqueous solution. Tetraethyl orthosilicate (TEOS) as the silica source precursor, L-arginine solution 0.9 M with various volume ratios and the linking agent were mixed together to form a gel. SiO2-Arg was characterized using Fourier transform infrared (FTIR) spectrophotometer, thermogravimetric analysis (TGA), and an elemental analysis. Adsorption was carried out in a batch system under various experimental conditions including contact time and initial concentration of metal Au(III). The selectivity of adsorbent toward Au(III) was examined in the presence of Cu(II), Fe(III), and Zn(II) ion at various pHs. Results of characterization showed that silica has been successfully modified with L-arginine. The optimum adsorption of Au(III) on SiO2-Arg was obtained at pH of 3.0 and the adsorption isotherm of Au(III) on SiO2-Arg gives the adsorption capacity of 52.79 mg/g. The kinetic study demonstrates that the adsorption of Au(III) ion follows pseudo-second order with the rate constant of 53197 g mol–1 min–1. The selectivity order of Au-Zn = Au-Cu > Au-Fe. This sol-gel preparation is simple and provides prospective application of SiO2-Arg material as an effective adsorbent for metal ions particularly gold(III).

Keywords


silica; modification; L-arginine; adsorption; gold(III)

Full Text:

Full Text Pdf


References

[1] Donia, A.M., Atia, A.A., and Elwakeel, K.Z., 2005, Sep. Purif. Technol., 42(2), 111–116.

[2] Tasdelen, C., Aktas, S., Acma, E., and Guvenilir, Y., 2009, Hydrometallurgy, 96(3), 253–257.

[3] Hagelüken, C., and Corti, C.W., 2010, Gold Bull., 43(3), 209–220.

[4] Ogata, T., and Nakano, Y., 2005, Water Res., 39, 4281–4286.

[5] El-Shahawi, M.S., Bashammakh, A., and Bahaffi, S.O., 2007, Talanta, 72(4), 1494–1499.

[6] Gomes, C.P., Almeida, M.F., and Loureiro, M., 2001, Sep. Purif. Technol., 24(1-2), 35–37.

[7] Xie, F., Lin, X., Wu, X., and Xie, Z., 2008, Talanta, 74(4), 836–843.

[8] Jal, P.K., Patel, S., and Mishra, B.K., 2004, Talanta, 62(5), 1005–1028.

[9] Zougagh, M., Pavón, J.M.C., and de Torrres, A.G., 2005, Anal. Bioanal. Chem., 381(6), 1103–1113.

[10] Mahmoud, M.E., Masoud, M.S., and Maximous, N.N., 2004, Microchim. Acta, 147(1-2), 111–115.

[11] Buhani, Narsito, Nuryono, and Kunarti, E.S., 2010, Desalination, 251(1-3), 83–89.

[12] Shiraishi, Y., Nishimura, G., Hirai, T., and Komasawa, I., 2002, Ind. Eng. Chem. Res., 41(20), 5065–5070.

[13] Abou-El-Sherbini, K., Kenawy, I.M.M., Hamed, M.A., Issa, R.M., and Elmorsi, R., 2002, Talanta, 58(2), 289–300.

[14] Ngeontae, W., Aeungmaitrepirom, W., and Tuntulani, T., 2007, Talanta, 71(3), 1075–1082.

[15] Budiman, H., Sri, H.K.F., and Setiawan, A.H., 2009, E-J. Chem., 6(1), 141–150.

[16] de Namor, A.D., and Abbas, I., 2010, Anal. Methods, 2, 63–71.

[17] Chai, X., Chang, X., Hu, Z., He, Q., Tu, Z., and Li, Z., 2010, Talanta, 82(5), 1791–1796.

[18] Li, F., Jiang, H., and Zhang, S., 2007, Talanta, 71(4), 1487–1493.

[19] Sakti, S.C.W., Siswanta, D., and Nuryono, 2013, Pure Appl. Chem., 85(1), 211–223.

[20] Fujiwara, K., Ramesh, A., Maki, T., Hasegawa, H., and Ueda, K., 2007, J. Hazard. Mater., 146(1-2), 39–50.

[21] Oshita, K., Takayanagi, T., Oshima, M., and Motomizu, S., 2007, Anal. Sci., 23(12), 1431–1434.

[22] Ramesh, A., Hasegawa, H., Sugimoto, W., Maki, T., and Ueda, K., 2008, Bioresour. Technol., 99, 3801–3809.

[23] Langmuir, I., 1918, J. Am. Chem. Soc., 40(9), 1361–1403.

[24] Freundlich, H., 1906, J. Phys. Chem., 57, 387–470.

[25] Silverstein, R., Webster, F., and Kiemle, D., "Infrared Spectrometry", in Spectrometric Identification of Organic Compounds, 7th ed., New York: John Wiley & Sons, Inc., 2005, 72–108.

[26] DeOliveira, E., Neri, C.R., Ribeiro, A.O., Garcia, V.S., Costa, L.L., Moura, A.O., Prado, A.G.S., Serra, O.A., and Iamamoto, Y., 2008, J. Colloid Interface Sci., 323(1), 98–104.

[27] Kumar, S., and Rai, S.B., 2010, Indian J. Pure Appl. Phys., 48, 251–255.

[28] Singh, S., Verma, L.K., Sambi, S.S., and Sharma, S.K., 2008, Proceedings of the World Congress on Engineering and Computer Science, San Francisco, USA, 112–117.

[29] Lagergren, S., 1898, K. Sven. Vetenskapsakad. Handl., 24(4), 1–39.

[30] Ho, Y., and McKay, G., 1999, Process Biochem., 34(5), 451–465.

[31] Wang, H., Bao, C., Li, F., Kong, X., and Xu, J., 2010, Microchim. Acta, 168(1), 99–100.

[32] Tong, A., Akama, Y., and Tanaka, S., 1990, Anal. Chim. Acta, 230, 179–181.

[33] Roberts, J.L., Hollenberg, J.L. and Postma, J.M., "Table 9. Solubility Product Constants (18-25 °C)" in General Chemistry in the Laboratory", 3rd ed., New York: W.H. Freeman and Company, 1990, 496.



DOI: https://doi.org/10.22146/ijc.21203

Article Metrics

Abstract views : 3276 | views : 3240


Copyright (c) 2015 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.