Influences of Temperature on the Conversion of Ammonium Tungstate Pentahydrate to Tungsten Oxide Particles with Controllable Sizes, Crystallinities, and Physical Properties

https://doi.org/10.22146/ijc.21154

Asep Bayu Dani Nandiyanto(1*), Heli Siti Halimatul Munawaroh(2), Tedi Kurniawan(3), Ahmad Mudzakir(4)

(1) Department of Chemistry, Indonesia University of Education – UPI, Jl. Dr. Setiabudhi No. 229 Bandung 40154, West Java
(2) Department of Chemistry, Indonesia University of Education – UPI, Jl. Dr. Setiabudhi No. 229 Bandung 40154, West Java
(3) Department of Mechanical Engineering, Universiti Malaysia Pahang, FKM UMP Pekan 26600 Pahang
(4) Department of Chemistry, Indonesia University of Education – UPI, Jl. Dr. Setiabudhi No. 229 Bandung 40154, West Java
(*) Corresponding Author

Abstract


The purpose of this study was to investigate influences of temperature on the conversion of ammonium tungstate pentahydrate (ATP) powder to tungsten trioxide (WO3) particles with controllable sizes, crystallinities, and physicochemical properties. In this study, we used a simple thermal decomposition method. In the experimental procedure, we explored the effect of temperature on the physicochemical properties of ATP by testing various heating temperatures (from 100 to 900 °C). The heated ATP samples were then characterized by a physical observation (i.e. color) and various analysis methods (i.e. a thermal gravimetric and differential thermal analysis, infrared spectroscopy, an X-ray diffraction, and a scanning electron microscope). Experimental results showed that increases in temperature had an impact to the decreases in particle size, the change in material crystallinity, and the change in physical properties (e.g. change of color from white, orange, to yellowish green). The relationships between the reaction temperatures and the physicochemical properties of the ATP were also investigated in detail along with the theoretical consideration and the proposal of the WO3 particle formation mechanism. In simplification, the phenomena can be described into three zones of temperatures. (1) Below 250 °C (release of water molecules and some ammonium ions).; (2) At 250-400 °C (release of water molecules and ammonium ions, restructurization of tungsten and oxygen elements, and formation of amorphous tungsten trioxide). (3) At higher than 400 °C (crystallization of tungsten trioxide). Since ATP possessed reactivity on temperature, its physicochemical properties changing could be observed easily, and the experimental procedure could be done easily. The present study will benefit not only for “chemistry and material science” but also potentially to be used as a model material for explaining the thermal behavior of material to undergraduate students (suitable used for a class and laboratory experiment and demonstration).

Keywords


tungsten oxide; ammonium tungsten pentahydrate; thermal decomposition; material science; powder processing

Full Text:

Full Text PDF


References

[1] Arutanti, O., Nandiyanto, A.B.D., Ogi, T., Kim, T.O., and Okuyama, K., 2015, ACS Appl. Mater. Interfaces, 7 (5), 3009–3017.

[2] Basu, A.K., and Sale, F.R., 1977, J. Mater. Sci., 12 (6), 1115–1124.

[3] Fouad, N.E., Nohman, A.K., Mohamed, M.A., and Zaki, M.I., 2000, J. Anal. Appl. Pyrolysis, 56 (1), 23–31.

[4] French, G.J., and Sale, F.R., 1981, J. Mater. Sci., 16 (12), 3427–3436.

[5] Gotić, M., Ivanda, M., Popović, S., and Musić, S., 2000, Mater. Sci. Eng., B 77, 193–201.

[6] Hunyadi, D., Sajó, I., and Szilágyi, I.M., 2014, J. Therm. Anal. Calorim., 116, 329–337.

[7] Magnusson, M.H., Deppert, K., and Malm, J.O., 2000, J. Mater. Res., 15, 1564–1569.

[8] Szilágyi, I., Madarász, J., Pokol, G., Hange, F., Szalontai, G., Varga-Josepovits, K., and Tóth, A.L., 2009, J. Therm. Anal. Calorim., 97, 11–18.

[9] Szilágyi, I.M., Sajó, I., Király, P., Tárkányi, G., Tóth, A.L., Szabó, A., Varga-Josepovits, K., Madarász, J., and Pokol, G., 2009, J. Therm. Anal. Calorim., 98 (3), 707–716.

[10] van Put, J.W., 1995, Int. J. Refract. Met. Hard Mater., 13 (1-3), 61–76.

[11] Nandiyanto, A.B.D., and Okuyama, K., 2011, Adv. Powder Technol., 22 (1), 1–19.

[12] Nandiyanto, A.B.D., Arutanti, O., Ogi, T., Iskandar, F., Kim, T.O., and Okuyama, K., 2013, Chem. Eng. Sci., 101, 523–532.

[13] Arutanti, O., Nandiyanto, A.B.D., Ogi, T., Iskandar, F., Kim, T.O., Okuyama, K., 2014, J. Alloys Compd., 591, 121–126.

[14] Arutanti, O., Ogi, T., Nandiyanto, A.B.D., Iskandar, F., and Okuyama, K., 2014, AIChE J., 60 (1), 41–49.

[15] Nandiyanto, A.B.D., Suhendi, A., Ogi, T., Umemoto, R., and Okuyama, K., 2014, Chem. Eng. J., 256, 421–430.



DOI: https://doi.org/10.22146/ijc.21154

Article Metrics

Abstract views : 2619 | views : 2561


Copyright (c) 2016 Indonesian Journal of Chemistry

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

 


Indonesian Journal of Chemistry (ISSN 1411-9420 /e-ISSN 2460-1578) - Chemistry Department, Universitas Gadjah Mada, Indonesia.

Web
Analytics View The Statistics of Indones. J. Chem.